These stainless steel 316 U Bolt with washer and nuts maybe used where an eyebolt would be too small or to go over tubing e.g. deckware
-
Waterproof Deck Plug and Sockets
Chrome Plated Brass with Plastic Cap -
Superior quality marine cable and battery cable for use in marine battery wiring, windlass wiring, and similar applications. All cable meets or exceeds all the requirements of regulatory bodies. Our cable features a durable yet flexible PVC insulation that is resistant to acid, alkalis, abrasion, flame, gasoline, oil, ozone, moisture, and fungus.
Flexible tinned copper stranding of our cable makes it easy to route and mould to any application as well as absorb vibration to avoid damage to connections.
Now available in Black and Red -
LED Navigation Lights (Pair)
12V Lights with low current draw.Supplied as a Port and Starboard Pair
Colour: Black (White options available)
Dimensions:
135mm (L) x 60mm (W) x 47mm (D) -
Fuse Holder
Can be used with switch panels 10035 and 10065-BK.
Select 5 Amp or 15 Amp options. -
Lenco Linear Actuator – HL2400S
Product Code: 5669S
Lenco Hatch Lifter - HL2400S
-
Maxwell circuit breaker/isolator panels are available to suit a wide range of windlasses and capstans. Mount as close as possible to the battery power source to ensure protection against short circuit and to reduce the risk of DC motor burn-out in the event of winch overloading. -
Capped Key for 10097 Battery Switch
Product Code: 10097-018
Capped Key for 10097 Battery Switch -
Rubber protection boot to fit Toggle Switch
Product Code: 10245-BOOT
Splash Proof Boot for MAXTEK 20A Toggle switch
NOTE: Does not fit BEP switches
-
Twin White Sheath Cable 1mm (CAB TW1.5WS)
Product Code: CAB TW1.5WS
Twin White Sheath Cable 1mm (CAB TW1.5WS) -
BEP M331 Splash Proof Boot
Product Code: M331
BEP M331 Splash Proof Boot for metal BEP toggle switches.
-
Waterproof Thermo Plastic Fuse Holder
Product Code: 11515A
Waterproof Thermo Plastic Fuse Holder -
BEP Insulated stud cover
Stud covers push securely over the threaded stud covering to ABYC standards
To suit 10mm studs
Red or Black colour option -
BEP Insulated Stud Cover – Dual 6mm (IS-6mm-2), black
Product Code: ISC-6-2
BEP Insulated Stud Cover - Dual 6mm (IS-6mm-2), black -
BEP Insulated Stud Cover – Dual 6mm (IS-6mm-2) Red
Product Code: ISC-6-2R
BEP Insulated Stud Cover - Dual 6mm (IS-6mm-2) Red -
Fuse Holder Water Resistant PVC
Product Code: 11517
Fuse Holder Waterproof PVC
-
Twin White Sheath Cable 2.5mm (CAB TW2.5WS)
Product Code: CAB TW2.5WS
Twin White Sheath Cable 2.5mm (CAB TW2.5WS) -
6mm tinned copper stud with high temperature plastic base
-
Electrical Tape – 3 Pack
Product Code: 151068
- One pack contains 3 rolls
- Length: 10m
- Width: 19mm
- Colour: Black, Green, Red
-
BEP 20A On-Off Toggle Switch
Product Code: 32111
Two position ON/OFF switch from BEP
-
BEP 32120 – (ON) OFF (ON) Toggle Switch
Product Code: 32120
BEP 32120 - (ON) OFF (ON) Toggle Switch
(ON) OFF (ON) = (momentary) off (momentary)
Switch Current Rating:
10 Amps @ 230 Volt AC
20 Amps @ 12 or 24 Volt DC -
BEP Key For 700 Switch
Product Code: 700-KEY
Replacement BEP key for 700 switch
-
BEP 20A On/Off/On DPDT Toggle Switch
Product Code: 32123
BEP Toggle switch
Switch configuration: Double Pole – Double Throw – On/Off/On
Compatible with Waterproof, Micro Series panels and Contour Switch Panel above
Switch Current Rating:
20 Amps @ 12 or 24 Volt DC -
BEP Bus Bar cover for stud MC20
Product Code: BBC-1
The Bus Bar Covers are designed to be a push fit, and to securely cover exposed studs and terminal lugs. Conforming to ABYC standards.
-
Waterproof Switch – SPST 3 Terminals
Product Code: 10113-01
Waterproof Switch
SPDT - 3 Terminals
Rated at 15 Amps -
Waterproof Switch with LED – SPST 3 Terminals
Product Code: 10123-01
Waterproof Switch with LED
SPST - 3 Terminals
Rated at 15 Amps
On-Off switch
Includes Labels -
BEP 32114 – ON/OFF/ON Toggle Switch
Product Code: 32114
Switch Current Rating:
10 Amps @ 230 Volt AC
20 Amps @ 12 or 24 Volt DC -
Pipe Connector for Square Vent
Product Code: 4383
Pipe Connector for Square Vent 118mm X 118mm
To suit 70mm and 65mm pipe -
BEP 20A Change-Over Toggle Switch
Product Code: 32113
BEP Two position Change-Over Switch
-
BEP 20A Momentary On/Off Toggle Switch
Product Code: 32115
BEP Two Position Momentary On – spring return switch
-
The 708 links are designed for space saving interconnections of terminals when battery distribution modules are linked together. Four standard solid links are available for interconnection of the 701 battery switch with other Battery Distribution products and two larger links which are intended for the heavy duty battery switch. See illustration for link applications.
-
BEP Key For 701 Switch
Product Code: 701-KEY
Replacement BEP Key For 701 Switch
-
Trailer Connector Male
Product Code: 31340
Standard replacement 7 Pin Male Trailer plug used in NZ for the connection of trailers to vehicles.
-
Triple 12V/24V Outlet Supply
Product Code: 31353
The SeaPower Triple Deck Cable Connector can operate in both 12V and 24V working voltages. It is ideal to be used when 3 electrical devices need to be working simultaneously. All the metal parts, including the screws, are made of stainless steel, which makes the connector suitable for the marine environment.
