Gaff - When you need an extra hand to pull those big fish onboard
1200mm alloy handle with stainless needle point hook
Part Code: GG1200
-
SALE!
1200mm Gaff
Product Code: GG1200
-
12V. Ocean Tech CARTRIDGE PUMP 1100 GPH. LIVEWELL
Product Code: NS1110
These marine aerator water-cooled housing live bait pumps are easy to install and the cartridge feature allows for easy access to the impeller that makes it easy to maintain and clean.
-
12V. Ocean Tech CARTRIDGE PUMP 750 GPH LIVEWELL
Product Code: NS880
These marine aerator water-cooled housing live bait pumps are easy to install and the cartridge feature allows for easy access to the impeller that makes it easy to maintain and clean.
-
3 Rod Holder and Storage Rack
Product Code: SW13403
3 Rod Storage Rack
* Has a handy place to store your pliers and fillet knives
* Made of white polypropylene that resists chips and cracks and can be cleaned up with soap and water
* UV Stabilizers make these rod -
4 Rod – Rod Rack
Product Code: 54034
Rod Rack manufactured from UV Stablized PE.
Comes complete with mounting hardware and two mounting feet per rack assembly. Mounts can be located along the length of the rack. -
750 GPH Dual Outlet – Ocean Tech Vertical Aerator Pump
Product Code: NS800-D
These marine aerator water-cooled housing bilge pumps are easy to install and the cartridge feature allows for easy access to the impeller that makes it easy to maintain and clean.
-
800GPH Seaflo Livewell Aerating Pump – Vertical
Product Code: NS800
Seaflo 800GPH Livewell Aerating Pump - Vertical
-
Adjustable Spray Aerator Head
Product Code: 4125
Attwood Adjustable Spray Aerator Head
-
Bait Board Transom Mount
Product Code: BB07
Twin Mount with transom fittings.
Works on the Trailer boat engine-well surround where space is limited,
or any Transom where a low profile fittings are required, Fits a range of Bait boards
-
Bait Board with Rod Holder Mount 450 x 370mm
Product Code: 70200
Our most popular Bait Board.
Comes complete with alloy mount. Fits into any standard deck rod holder. -
Black Rod Holder – Wide Head with Cap
Product Code: 4409B
Wide head Nylon Rod Holder complete with weathertight Cap
Head: 107mm x 85mm,
Length: 232mm, ID:42mm
Made in Italy
Colour
Black 4409B
-
Cap for rod holder 2″ Black
Product Code: RC10
Black insert for (imperial) stainless steel tube, 2".
Fits 2" (50.8mm) outside diameter tube, max. wall thickness 1.5mm (minimum I.D. 1.7/8" [47.7mm]). -
Cup Holder SS Rod Holder Combination
Product Code: 54090
Flush Mount Polished Stainless Angled Rod Holder
Dual purpose rod / drink holder with upper section designed to secure cans and bottles.
Robustly manufactured from 316 grade stainless steel for corrosion resistance and durability.* 316 stainless - polished finish
* Robust construction - Cast in one piece
* White PVC Liner
* Drain Hole
* Securing base
* 30º Angle
Dimensions:
Requires 250mm of depth
Cup outside mounting diameter: 115mm
Cup internal dia: 87mm
Length (oa): 260mm
Rod tube angle: 30° -
Delux Bait Board Mount ONLY (BB09M)
Product Code: BB09M
Delux Bait Board
-
Delux Bait Board ONLY (BB08)
Product Code: BB08
Delux Bait Board
Complete with drain hole and gutter around cutting surface.
SEE OPTIONS BELOW
Dimensions:
720L – 440W – 50D -
Delux Bait Board WITH Mount (BB09)
Product Code: BB09
Delux Bait Board
-
Dometic 111 Litre Cooler Box
Product Code: 2007
111l Cooler Box / Chilly Bin / Icebox / Esky
-
Dometic 43 Litre Cooler Box
Product Code: 2002
43l Cooler Box / Chilly Bin / Icebox / Esky
-
Dometic 56 Litre Cooler Box
Product Code: 2003
56l Cooler Box / Chilly Bin / Icebox / Esky
-
Dometic 71 Litre Cooler Box
Product Code: 2004
71l Cooler Box / Chilly Bin / Icebox / Esky
-
Dometic 87 Litre Cooler Box
Product Code: 2005
87l Cooler Box / Chilly Bin / Icebox / Esky
-
Dometic 92 Litre Cooler Box
Product Code: 2006
92l Cooler Box / Chilly Bin / Icebox / Esky
-
Fish Bin 70 Litre Black
Product Code: 575.02
Fish Bin
Specifiactions
70L Fish Bin: 670mm L x 450mm W x 330mm H (P/N 575.02)
Please note that this is just the Base and does not come with the Lid.
-
Floating Fold-up Safety Knife
Product Code: 11053
Folding knife that Floats
-
Flying Gaff – SS head, 1600mm handle
Product Code: GG1600FLY
Flying Gaff - SS head, to fit 1600mm handle.
Nacsan flying gaff, New Zealand made. 3 sizes in heads - all heads will fit Nacsan flying gaff handle ( Med Head Shown)
Medium head. 12mm 304 S/S complete with 6mtr rope
Large head. 16mm 304 S/S complete with 6mtr rope
Ex Large head. 19mm 304 S/S complete with 6mtr rope
Flying gaff Handle. 1600mm handle with nylon insert
-
High Sided Bait Board – 600(l) x 400(w)
Product Code: BB12
High Sided Bait Board
-
Kiwi Sizzler Large Smoker
Product Code: SMOKERGUP
Kiwi Sizzler Large Smoker
Made from High grade stainless steel and with easy LPG operation you can smoke your weekend catch in one go! -
Large Bait Board – 850(l) x 450(w)
Product Code: BB04
Large Bait Board
-
Lowrance Precision-9 Compass
Product Code: LOW-000-12607-001
Solid-state compass with heading, rate of turn, pitch and roll output over NMEA 2000. The Precision-9 Compass supplies accurate heading and rate-of-turn information to Lowrance autopilot, radar and navigation systems over an NMEA 2000 connection. With an internal array of solid-state sensors constantly measuring motion and orientation on nine axes, the Precision-9 also provides pitch and roll data to compatible equipment.
-
maXtek Cooler Chocks – Set of 4
Product Code: 70207-BP
Stop your cooler or fish bins from sliding around the boat. These chocks alllow you to tie down your bin and secure firmly. Plastic Cooler Chocks that can be fixed to your boat to prevent your Chilly bin or Ice Box moving around.
-
Medium Bait Board 560(l) x 380(w)
Product Code: BB01
Small Plain Bait Board made in New Zealand
- Solid non flex construction
- Bait Board made from UV stabilised polymer
- Universally used in stainless steel bait stations
Dimensions (mm): 560 (L) x 380 (W) x 50 (D)Options available (sold separately)
Rod holder mount
Transom mounting kit -
Mooring buoy / Cray Buoy – Large
Product Code: 16388
10” Large Marker Buoy with a total length of 39 cm
Twin handles at the top and an attackent eye at the base under the waterline.
- Can be used as anchor buoy, mooring buoy, marker buoy
- UV resistant
- Durable polyurethane hard plastic
- Useful for fishing nets, set lines and a marker float for cray pots
Orange marker buoy
Marker floatDimensions:
Diameter: 250 mm
Length (oa): 390mm -
Mount for Pot Hauler
Product Code: POTHMNT
Mount for MTK9000 MaXtek Electric Pot Hauler.
Mount only.
Click here for the Maxtek Pot Hauler. -
NZ Anglers Mate Longline Kit
Product Code: NZAMLONGL
NZ Anglers Mate Longline Kit
Kit contains:
2 x floats
2 x 5mm grapnel anchors
1 x 10” hand caster backbone with 2 x stainless steel shark clips
1 x 25 trace set with snap swivels
Includes handy storage basket -
Ocean Blue Outrigger – Full Kit -Stiff action
Product Code: OBLU15KIT
Affordable quality stainless steel outrigger bases that suit up to 20ft outrigger poles. Multiple clamping and mounting positions to suit your boat.
-
Premium Large Portable Smoker
Product Code: SMOKER
Smoke gourmet food:
- High grade stainless steel
- Easy Fuel, light, operation, place lid sit back and enjoy
- Variable air flow
- Removable trays
- Comes withFuel Trays
- Uses standard wood chips
2 grab handles
Dimensions: 550W x 450D x 200H -
Premium SS Oval Flush-Mount Rod Holder – 30°
Product Code: 4422
Polished Oval Rod Holder
Our premium flush mount rod holder is robustly manufactured from 316 grade stainless steel for corrosion resistance and durability. The head of the holder is cast in one piece.
* 316 stainless - polished finish
* Robust construction - Cast head
* Black PVC Liner
241 (l) x x I.D. 42mm x 30°Available in a Blister Pack
-
Rail Mounted Bait Board
Product Code: 70201
Rail Mounted Bait Board
Complete with adjustable rail mount.
Dimensions:
Width: 510mm
Depth: 350mm
Height above rail when mounted: 90mm -
Rod holder – Side or Deck mount
Product Code: 54079-2BK
The RodKing Rod Holder is a multi-fit removeable rod holder. It is fully adjustable and can be mounted vertically or deck mounted on a flat surface.
203mm long and has a generous 47mm opening. -
Rod Holder – Tournament 32mm Rail Mount
Product Code: 54089
Tournament Series Stainless Steel Rod Holder for Larger Rails
Highly polished Stainless steel rod holder designed to easily clamp-on to boat rails. Clamps on to rails and angle can be adjusted 180 degrees vertically to suit your set up.