-
Reducer 19mm - 13mm White (90611) -
Reducing Bushes
Range of sizes available -
Non Return Valve
Designed to permit fluid flow in one direction only.
The valves function over a wide range of operational pressures. -
Bronze Tailpieces / Elbow Hosetails
-
Elbow Female to Female 15mm (6444) -
Threaded Pipe Plug
-
Tru Design Skin Fittings - Domed. For below water applications.
-
New style Shower Nozzle with cross-link hose
Select 3.0m or 5m hose length -
TruDesign Tail Long Thread 90° bend elbows with male tread and hose tail.
-
Tru Design Hose Connectors.
-
Shower Kit -
Kit includes: Shower Box, Nozzle, Mixer, hose and fittings (as pictured).
Box Dimensions: 250mm x 190mm x 95mm -
Tru Design Hose Tails with Long Thread
-
Trudesign elbows female thread with hose tails.
-
Tru Design Thru Bulkhead Fittings 140mm with nuts and washers.
-
Nipples - Synthetic 15 to 50mm sizes
Used for joining pipes.
-
TruDesign Y Pieces
-
Tru Designs Aquavent® has been designed and manufactured in New Zealand for use in Marine applications.
Vented loops are commonly used for inlet and discharge pipes on toilet installations below the water line. Our Aquavent is moulded in a glass reinforced nylon composite, with a silicon bleed valve. The bleed valve allows air into the system to stop syphoning yet seals effectively when water or fluid pass through.
The advantage with our vented loops over others, is that the internal diameter is the same throughout the bend - meaning there is no restriction.
The Aquavent can be used as a holding tank vent by replacing the bleed valve fitting with a tube that is connected to a deck level vent.
-
Reducing Nipples
Several Sizes available -
Tru Design Straight Threaded Hose Tails - Female.
-
Replacement element for Force 10 water heaters. Can be used to convert 240 volt water heaters to 110 volt systems, or as a replacement for a standard 240 volt or 110 volt 1500 watt heating element. *Picture shows one of each voltage element. -
Plug PVC 40mm (6481)
Product Code: 6481
Plug PVC 40mm (6481) -
3/4″ (20mm) Bilge Hose – sold per foot
Product Code: BILGE20B
Black corrugated polyethylene hose with cuff every 12" for ease of installation.
-
1-1/8″ (28mm) Bilge Hose – Sold per foot
Product Code: BILGE28B
1-1/8" (28mm) Bilge Hose
Black corrugated polyethylene hose with cuff every 12" for ease of installation.
Sold per foot -
Hose Clamps 8-16mm
Product Code: CLAMPS08
Stainless Steel Hose Clamps to suit hose diameter 8 to 16mm
MIKALOR 9mm (band width) L-band Worm-drive Hose clip
The ASFA-L W4 hose clip has excellent performance while being at the same time very compact. The cold-formed stamped ba
-
TMC Toilet Part No.28 Gasket
Product Code: 8322
TMC Toilet Part No.28 Gasket
Refer to exploded view diagram here for placement on toilet.
-
Hose Clamps 12-22mm
Product Code: CLAMPS12
Stainless Steel Hose Clamps to suit hose diameter 12 to 22mm
MIKALOR 9mm (band width) L-band Worm-drive Hose clip
The ASFA-L W4 hose clip has excellent performance while being at the same time very compact. The cold-formed stam
-
Plug PVC 50mm (6459)
Product Code: 6459
Plug PVC 50mm (6459) -
8mm Male (6503)
Product Code: 6503
8mm Male (6503) -
Hose Clamps 16-27mm
Product Code: CLAMPS16
Stainless Steel Hose Clamps to suit hose diameter 16 to 27mm
MIKALOR 9mm (band width) L-band Worm-drive Hose clip
The ASFA-L W4 hose clip has excellent performance while being at the same time very compact. The cold-formed stam
-
Hose Clamps 20-32mm
Product Code: CLAMPS20
Stainless Steel Hose Clamps to suit hose diameter 20 to 32mm
MIKALOR 9mm (band width) L-band Worm-drive Hose clip
The ASFA-L W4 hose clip has excellent performance while being at the same time very compact. The cold-formed stam
-
Male Hose Tails
Sizes from 10mm to 50mm available.
-
1-1/4″ (32mm) Bilge Hose – Sold per foot
Product Code: BILGE32
1-1/4" (32mm) Bilge Hose
Black corrugated polyethylene hose with cuff every 305mm (1 ft) for ease of installation.
Sold per foot -
Hose Clamps 25-40mm
Product Code: CLAMPS25
Stainless Steel Hose Clamps to suit hose diameter 25 to 40mm
MIKALOR 9mm (band width) L-band Worm-drive Hose clip
The ASFA-L W4 hose clip has excellent performance while being at the same time very compact. The cold-formed stam
-
TMC Toilet Part No.15 Elbow
Product Code: 8331
TMC Toilet Part No.15 Elbow
Refer to exploded view diagram here for placement on toilet. -
Hose Clamps 32-50mm
Product Code: CLAMPS35
Stainless Steel Hose Clamps to suit hose diameter 32 to 50mm
MIKALOR 9mm (band width) L-band Worm-drive Hose clip
The ASFA-L W4 hose clip has excellent performance while being at the same time very compact. The cold-formed stam
-
Male/Female Adaptor 15mm – 20mm
Product Code: 6530
Male/Female Adaptor 15mm - 20mm -
TMC Toilet Part No.21 Gasket
Product Code: 8342
TMC Toilet Part No.21 Gasket
Refer to exploded view diagram here for placement on toilet.
