Tru Design Skin Fittings - Domed. For below water applications.
-
Threaded Pipe Plug
-
Stainless steel 316 eye strap round pad eye, also known as saddles, provides a useful point of attachment for chain, clips, rings and line.
-
Stainless steel 316 square Eye plate also known as an Pad Eye are designed to screw into all types of panels for different applications. (Requires 4 x screws)
-
Trudesign elbows female thread with hose tails.
-
Waterlock to prevent motor damage from backflow.
-
Tru Design Straight Threaded Hose Tails - Female.
-
The maXtek winch handle won’t break your wallet. These models give you a lighter, stronger and more buoyant handle. Glass-filled nylon handle halves are welded together for extreme stiffness.
-
Emergency Kill Switch Key
-
LED Masthead Light for Vessels <12M
-
Manufactured from high quality stainless steel 316, these closed body turnbuckles, also known as rigging screws, tensioners or bottlescrews. Pipe type with hook and eye end.
-
Superior quality marine cable and battery cable for use in marine battery wiring, windlass wiring, and similar applications. All cable meets or exceeds all the requirements of regulatory bodies. Our cable features a durable yet flexible PVC insulation that is resistant to acid, alkalis, abrasion, flame, gasoline, oil, ozone, moisture, and fungus.
Flexible tinned copper stranding of our cable makes it easy to route and mould to any application as well as absorb vibration to avoid damage to connections.
Now available in Black and Red -
New style Shower Nozzle with cross-link hose
Select 3.0m or 5m hose length -
Steering Cable Grommet
68mm (H) X 105mm Diameter
Available in Black or White Colour
-
Fuse Holder
Can be used with switch panels 10035 and 10065-BK.
Select 5 Amp or 15 Amp options. -
Made from marine grade stainless steel 316, these can be used as a marine mooring swivel fitting for connection into a mooring line.
-
Manufactured from high quality stainless steel 316 theses spring hooks are also refereed to as a Carabiner. There a various applications for e.g. ski tow rope for a quick release
-
LED Navigation Lights (Pair)
12V Lights with low current draw.Supplied as a Port and Starboard Pair
Colour: Black (White options available)
Dimensions:
135mm (L) x 60mm (W) x 47mm (D) -
Manufactured from high quality stainless steel 316, these closed body turnbuckles, also known as rigging screws, tensioners or bottlescrews.
-
TruDesign Y Pieces
-
Medium Grey Hatch
External Dimensions: 375mm x 370mm
White or Grey
Top Line, 180° Opening -
Side mounted LED naviation lights for vessels between 12 and 20 meters in length.
One set of Port & Starboard LED Navigation Lights
FOS LED 20 -
Stainless steel 316 screw eye thread with separate ring.
Designed to thread directly into wood. Cast eye with tapered cut thread and attractive polished stainless finish. -
Shower Kit -
Kit includes: Shower Box, Nozzle, Mixer, hose and fittings (as pictured).
Box Dimensions: 250mm x 190mm x 95mm -
The stud swage is made from grade 316 stainless steel for maximum corrosion resistance. This can be combined with a stainless steel grade 316 pelican hook, suitable for lifeline applications where a gate is desired.
-
Oval Cockpit Table.
-
Martyr Alloy Sacrificial Shaft Anodes
-
TruDesign Tail Long Thread 90° bend elbows with male tread and hose tail.
-
Reducer 19mm - 13mm White (90611) -
Manufactured from stainless steel 316
Metric thread female socket -
Stainless steel 316 twist shackle is usually somewhat longer than the average and features a 90deg twist so the top of the loop is perpendicular to the pin. They are designed for application where a more secure tightening pin is required. Excellent used in a shade sail design, combined with a thimble dee ring onto oblong eye plate.
-
Manufactured from stainless steel 316 grade, Dee shackles are more common than most other shackle types. An alternative to a snap hook, used to fix your shade sail to a chain or direct to a fixing point.
-
Spreader Boots (PVC Anti Chafe Covers)
-
Small to Medium White Hatch
External Dimensions: 440mm x 315mm
Top Line 180° Opening -
- For vessels between 12-20m
- Visible distance: 2 nm
- 12-24 VDC, 1.5 W
- White LED light
- Vertical Mounted
- LED life 50,000 hours
- Waterproof, non-corrosive, non-magnetic
- 1.2m length of wire per unit
- Double-side adhesive sticker that can be used as drilling drawing
-
Gooseneck for exhaust hose with 40 mm internal diameter. Raises the exhaust hose above the waterline so that water cannot backfill the exhaust system.
-
Plastimo Iris 50 Hand Bearing Compass allows you to read a bearing without shifting your eyes off your mark. This small hand bearing compass lets you get more accurate bearings faster and without eyestrain. Its dial and needle are photo-luminescent, optimising night time use without the need for batteries - just recharge it under the sun, Housed in a robust, soft, nonslip shell, it’s ruggedly built with a soft expansion diaphragm to prevent leaks and bubbles.
. -
Stainless steel 316 swivelling pad eye is a great attachment point.
-
LED Strip Light with lenticular cover. These surface mount LED Utility Strip Lights are great for lighting or decorating interior and exterior of boats, RVs and other vehicles. Being 100% waterproof, they are suitable for underwater applications just below the waterline.
-
Quick Fit VHF Aerials available in varing lengths and in oth black and white colours
-
Tru Design Hose Tails with Long Thread
-
Tru Designs Aquavent® has been designed and manufactured in New Zealand for use in Marine applications.
Vented loops are commonly used for inlet and discharge pipes on toilet installations below the water line. Our Aquavent is moulded in a glass reinforced nylon composite, with a silicon bleed valve. The bleed valve allows air into the system to stop syphoning yet seals effectively when water or fluid pass through.
The advantage with our vented loops over others, is that the internal diameter is the same throughout the bend - meaning there is no restriction.
The Aquavent can be used as a holding tank vent by replacing the bleed valve fitting with a tube that is connected to a deck level vent.
-
Replacement Propellor Nut Anodes
-
These stainless steel 316 U Bolt with washer and nuts maybe used where an eyebolt would be too small or to go over tubing e.g. deckware
-
These stainless steel 316 key shackle also known as a halyard shackle with crossbar and locking pin for opening a closing, is done simply by rotating the pin half a turn. Used for applications required to open/close the shackle often.
-
These stainless steel 316 quick links are designed to where a quick connection piece is needed between two chain eye or hook with eye end.
-
Manufactured from high quality stainless steel 316, these closed body turnbuckles, also known as rigging screws, tensioners or bottlescrews. Frame type with hook and eye end.
-
Water separator fuel filter – Compatible with Racor S3214
-
Small White Hatch - Nuova Rade
External Dimensions: 375mm x 270mm
Top Line 180° Opening -
Lenco #101 Power Cylinder
Standard replacement actuator / ram to suit most standard lenco trim tab kits.
The Lenco ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics.
Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections.
Stroke travel: 57mm
Overall length tip to tip when retracted: 30.80cm
Cable length supplied: 1.83cm
The entire Lenco Actuator is fully submersible, maintenance free and sealed for life.
Lenco trim tabs and switches carry a 3-year limited warranty from the date of original purchase. -
Waterlock/muffler with dual stage construction. Superior silencing of exhaust noise with minimal back pressure. 360° rotatable top chamber and connectors.
-
Rod Holder - Lalizas, plastic
Internal Diameter: 47.5mm
Height: 253mm -
A snap shackle is a fast action fastener which can be implemented single handed. It uses a spring activated locking mechanism to close a hinged shackle and can be unfastened under load.
-
Nipples - Synthetic 15 to 50mm sizes
Used for joining pipes.
-
Wire rope grips AISI marine grade 316, are designed to secure stainless steel wire rope, when length of the wire rope. Needs to be shortened or adjusted.
-
Tru Design Hose Connectors.
-
Martyr Prop Nut Anodes
-
Waterproof Deck Plug and Sockets
Chrome Plated Brass with Plastic Cap -
Rod Holder - Rectangular Top
-
Spin on Fuel Filter/Water Separator with aluminium mount
* Complete with Fuel line connections 3/8" x 1/4" NPT
* 10 micron for inboard and outboard 2 & 4 stroke engines
* 240 LPH(60GPH)
* Fuel filter element
* Saltwater resistant parts (Brass fittings)
-
Small Narrow White Hatch - Nuova Rade
External Dimensions: 607mm x 243mm
Top Line 180° Opening -
Lenco 102 XD Actuator
Stroke: 4-1/4" (10.8 cm)
Length overall: 12-7/8" (32.70 cm)
Length pin to pin: 12-1/4" (31.11 cm)
Diameter (upper housing): 2-1/2" (6.35 cm)
Mounting hardware: 5/16" (.79 cm) -
maXtek LED Port Light for Vessels <12M
-
Rod Mounting Loops - Available in White or Black
Simple effective holding rings for a single rod storage onboard the boat or mounting on the garage wall. Perfect for mounting rods on the cabin roof of a boat.
These racks are 14mm wide, 66mm long and 64mm deep. -
Made from marine grade stainless steel 316, these swivel snapshackle with jaw, uses a spring activated locking mechanism to close a hinged shackle cand can be unfastened uder load. It includes a removable shackle pin.
-
Tru Design Thru Bulkhead Fittings 140mm with nuts and washers.
-
Reducing Bushes
Range of sizes available -
Plastic Tube or Tiller Clip from 15mm to 45mm.
High Quality Italian Product for securing’
Pipe clip
Pipe Mounting
Useful for a wide range of applications - Store fishing nets, anchor lights, gaffs, tiller extensions, power cords
Easy to use and install - Can be mounted on a horizontal or vertical surface
Requires 2 mounting screws for each storage clip. -
Reducing Nipples
Several Sizes available -
Non Return Valve
Designed to permit fluid flow in one direction only.
The valves function over a wide range of operational pressures. -
Manufactured from high quality stainless steel 316, these closed body turnbuckles, also known as rigging screws, tensioners or bottlescrews.
-
The stainless steel marine grade 316 round rings are very solid and dependable, suitable for many varieties of applications.
-
Made from stainless steel marine grade 316, these mame swivel blocks with nylon single sheave are specifically designed as a light pulley function.
-
Made from marine grade stainless steel 316, these fixed eye snapshackle is for general purpose such as genoa halyards, uphauls, downhauls and outhauls, where a permanent non-swivel action end is required.
-
Access Hatch - Removable Lid
External Dimensions: 306mm x 356mm
Internal Dimensions: 246mm x 296mm -
Premium Quality YAMAHA Fuel Line with 2 year Warranty
Includes Primer bulb, 3/8" alcohol resistant fuel line hose and fittings assembled on both ends
Suits Mercury 1988-98, Mariner 1988-98 and Yamaha -
The maXtek trumpet horn is finished in polished stainless steel. This dual trumpet horn gives a really good two tone blast.
-
Premium grade maXtek primer bulb with 8mm (5/16”) hose tails
Low permeation bulb material stands up to ethanol blended fuels. Superior construction resist ballooning under pressure and collapsing under vacuum. 5/16" hose barbs are secured using stainless clamps to avoid corrosion and offer a leak-free seal. For faster priming that will meet current regulations, exceed OEM specifications and stand up to blended fuels.
