BEP 703-500A Distribution Bus is designed to take loads from Heavy Duty Starter Circuits. Taller cover allows for more bulky cables and lugs.
-
BEP Distribution Bus 500A
Product Code: 703-500A
-
BEP Dual Bank Control Battery Switch
Product Code: 772-DBC-EZ-BP
Innovative Dual Bank Control switch is like 3 switches in one – House, Start, and Emergency Parallel.
-
BEP Dual Battery Selector with VSR
Product Code: 714-140A-DVSR
The 714-140A-DVSR uses our new dual sensing 12 & 24 Volt VSR (710-140A). A welcome addition to the 701 selector switch it ensures you will always have a fully charged reserve battery. When the switch is in position 1 it becomes the sensing battery for the VSR. Battery 2 which is in isolation will be charged via the VSR when the engine is running ensuring it is always fully charged. When the switch is in battery 2 position this becomes the sensing battery and battery 1 is charged via the VSR. The fact that there is always a fully charged battery in reserve is a huge safety factor.
Dimensions: 138L x 69W x 75H mm -
BEP Gas Detector 600-GD
Product Code: 600-GD
BEP Gas Control Panel with detection and alarm.
-
BEP Gas Detector FD-2
Product Code: FD-2
The FD-2 is designed for an economic in-dash installation. Features include clearly visible LED for safe and alarm mode, and audible alarm with test function. Supplied with sensor (5 metre cable) which is capable of detecting combustible gases.
-
BEP Gas Detector with Built-In Sensor 600-GDRV
Product Code: 600-GDRV
The Contour Matrix Gas Detectors are the product of continuingresearch and development which BEP Marine Ltd devotes to their product range. The BEP Detectors use microprocessor control to ensure correct sensor sensitivity. The Detectors have the capability to control two sensors which detect both LPG and Petrol, with visual and audible alarms.
-
BEP Gas sensor LPG 5 metre BL-SL-L
Product Code: BL-SL-L
BEP Gas sensor LPG 5 metre
Gas sensor lead with a 5 meter lead. Fits 600-GD, 600-GDL, 600GDRV and FD-2
-
BEP Gas Shut Off Switch 600-LPG
Product Code: 600-LPG
BEP Gas Shut off Switch
Stand alone On/Off control of gas solenoid valve
This panel does not have gas detection capability. -
BEP Heavy Duty 650A 8 Way Bus Bar
Product Code: 777-BB8S-650
Marinco Pro Installer 650 Amp bus bar designed for flexibility and scalability.
Snap-out side skirts allow for additional cable entry, and radius ends improve cable routing options. It is easy to link other Pro Installer products to the bus bars because of the common interconnection height in the product line. -
BEP Heavy Duty ANL Fuse Holder
Product Code: 704-ANL
Allows fusing of heavy duty accessories between 80-500 Amp.
Mounted in Contour lock mouldings with removable sides.
Meets ABYC Standards for exposed terminals. -
10mm tinned copper stud with high temperature plastic base
-
6mm tinned copper stud with high temperature plastic base
-
8mm tinned copper stud with high temperature plastic base
-
BEP Insulated Stud Cover – Dual 6mm (IS-6mm-2) Red
Product Code: ISC-6-2R
BEP Insulated Stud Cover - Dual 6mm (IS-6mm-2) Red -
BEP Insulated Stud Cover – Dual 6mm (IS-6mm-2), black
Product Code: ISC-6-2
BEP Insulated Stud Cover - Dual 6mm (IS-6mm-2), black -
BEP Insulated stud cover
Stud covers push securely over the threaded stud covering to ABYC standards
To suit 10mm studs
Red or Black colour option -
BEP Insulated Studs With Cover
Product Code: 704-4S
The 704-4S was designed for multiple heavy duty connections which need to be isolated from each other. This model completes the range of heavy duty connectors and meets ABYC standards for exposed terminals.
-
BEP Insulated twin stud 6mm Black with cover
Product Code: IS-6MM-2/DSP
BEP Insulated twin stud, 6mm Black with cover
6mm tinned copper stud with high temperature plastic base
Dimensions: 42.25mm (L) x 36mm (W) x 31mm (H)
25.5mm stud centres
24mm fixing hole centres -
BEP Insulated twin stud linked, 10mm Black
Product Code: IS-10MM-2L
BEP Insulated twin stud linked, 10mm Black
10mm tinned copper stud with high temperature plastic base
Dimensions: 42.25mm (L) x 36mm (W) x 31mm (H)
25.5mm stud centres
36mm fixing hole centres -
BEP Insulated twin stud, 6mm Black
Product Code: IS-6MM-2
BEP Insulated twin stud, 6mm Black
6mm tinned copper stud with high temperature plastic base
Dimensions: 42.25mm (L) x 36mm (W) x 31mm (H)
25.5mm stud centres
24mm fixing hole centres -
BEP Key For 700 Switch
Product Code: 700-KEY
Replacement BEP key for 700 switch
-
BEP Key For 701 Switch
Product Code: 701-KEY
Replacement BEP Key For 701 Switch
-
BEP LARGE C/Breaker Single Pole 100A (CBL-100A-SP)
Product Code: CBL-100A-SP
BEP LARGE C/Breaker Single Pole 100A (CBL-100A-SP) -
BEP M331 Splash Proof Boot
Product Code: M331
BEP M331 Splash Proof Boot for metal BEP toggle switches.
-
BEP Multi Bus Bar – 150Amps
Product Code: BB-4S-150A
The multi bus bars enables either positive and negative (DC) buses on one block or earth and neutral (AC) buses on one block.
-
BEP Multi Bus Bar 12 Way x 2
Product Code: BB-12W-2NC
The multi bus bars enables either positive and negative (DC) buses on one block or earth and neutral (AC) buses on one block.
-
BEP Multi Bus Bar 6 Way x 2
Product Code: BB-6W-2NC
The multi bus bars enables either positive and negative (DC) buses on one block or earth and neutral (AC) buses on one block.
-
BEP Relay -DVSR 140 Amp – 12/24 Volt
Product Code: 710-140A
The DVSR (Digital Voltage Sensing Relay) allows charging of two independent battery banks from a single charging source. When the voltage on the start battery rises to a charged level, the DVSR engages allowing the 2nd battery to charge. When charging stops and voltage falls, the DVSR will disengage, isolating the two batteries from each other.
-
BEP Remote Operated Motorised Battery Switch – 275Amps
Product Code: 701-MD
BEP 701-MD Remote Operated Motorised Battery Switch - 275Amps
-
BEP Remote Operated Motorised Battery Switch – 275Amps Deuts
Product Code: 701-MD-D
Remote operated battery selector switch with deutsch connector
275A -
Surge Protection Module. Protect your electronics from becoming damaged by harmful high voltage spikes. When fitted to the battery supply these modules look for sudden increases in voltage then switch into protection mode to absorb and suppress the high energy spike.
-
BEP Switch 1101-BK On/Off 20A Rocker
Product Code: 3216
Contour 1100 Series Rocker Switch - 1101-BK
-
BEP Triple Battery Switches with DVSR – Flush mount
Product Code: CC-803N
The BEP CC-803N offers a more modern, flush mounted switch vs the standard 717 cluster
The CC-803N is supplied with cables to allow for horizontal or vertical configurations.
These components can also be easily removed and reconfigured if the factory layout does not suit your application.
-
BEP Twin O/B, 3 bat. banks-125A DVSR battery Dist. cluster
Product Code: 717-140A-DVSR
The 717-140A-DVSR is designed for twin engine installations.
-
BEP Water Proof Contour Panel – 6 way
Product Code: CSP6-F
Popular BEP switch panel.
