A fully assembled pressure set that simplifies the installation of water pressure systems for both the professional and amateur installer. The set consists of a 3 chamber diaphragm pump, strainer and pre-pressurized accumulator tank with quick connect electrical connections on a Plate mounted board with 1/2" (13mm) outlets.
-
Water Pressure Pump Kit 20 lpm 60psi – 12V with 1L Accumulat
Product Code: NS44KIT
-
Metal Mouting Bracket for maXflo Water Pressure Pump
Product Code: NS44BR
Metal Mounting Bracket to suit NS44
Powder coated black with rubber mounting boots -
Pressure Pump – 40PSI – 17 L/Min – 24V
Product Code: NS42
Water Pressure Pump - 40PSI - 17 L/Min - 24 Volt maXflo Pump These new generation pumps guarantee quiet operation and smooth performance while providing the ultimate in durability and reliability.
-
Pressure Pump – 40PSI – 17 L/Min – 12V
Product Code: NS40
Water Pressure Pump - 40PSI - 17 L/Min - 12 Volt maXflo Pump These new generation pumps guarantee quiet operation and smooth performance while providing the ultimate in durability and reliability.
-
Tuna Tube pump 3700GPH Rule
Product Code: NS3700R
The general purpose pump is designed as a washdown pump or to circulate water in your Livewell tank / tuna tubes. Heavy duty for use on commercial or recreational boats. The pump has a 1-1/2" (38mm) inlet and 1-1/2" (38mm) discharge outlet.
-
Pressure Pump – 35PSI – 13 L/Min – 12V
Product Code: NS35
Water Pressure Pump - 35PSI - 13 L/Min, 12 Volt maXflo Pump These new generation pumps guarantee quiet operation and smooth performance while providing the ultimate in durability and reliability.
-
Rule-Mate Fully Automated Bilge Pump 2000GPH
Product Code: NS2000RA
The Rule-Mate® 2000 GPH pump consists of a powerful Rule® bilge pump and a highly intelligent circuit board in a single housing. The pump activated when the water reaches 2-1/2" and automatically shuts off when the pump senses no water against the impeller, reducing the remaining water to approximately 5/8".
-
Stainless Steel Strainer Livewell 3/4″ thread
Product Code: NS19
The perfect product to prolong the life of your livewell pump. This strainer simply screws onto the bottom of the inlet and stops any unwated debris entering into the pump and/or the livebait tank.
-
Raw Water Filter – Large
Product Code: NS18526-02
The raw water filter is designed to reduce solids, particles and other impurities from entering the pipe system or engine.
-
Raw Water Filter – Small
Product Code: NS18526-01
The raw water filter is designed to reduce solids, particles and other impurities from entering the pipe system or engine.
-
Wide Roller – 135mm
Product Code: NS1232S
Bow Roller Guide
Roller width: 135mm
Roller bracket width: 150mm
Overall width (including bolt and nut): ~190-195mminternal roller hole : 20mm
-
Wide Roller – 195mm
Product Code: NS1232
Roller guide - 208mm
Marine Grade 316 Stainless SteelLots of uses
- Ideal as a bow roller guide
- Cray pot guide
- Kontiki Drum roller
- Anchor Roller
- Trailer Roller
Dimensions:
Roller Width: 195mm
Bracket Width: 210mm
Width (oa): 250mm
Height (oa): 87mm -
12V. Ocean Tech CARTRIDGE PUMP 1100 GPH. LIVEWELL
Product Code: NS1110
These marine aerator water-cooled housing live bait pumps are easy to install and the cartridge feature allows for easy access to the impeller that makes it easy to maintain and clean.
-
Rule 1100GPH Livewell Aerating Pump – Vertical
Product Code: NS1100R
Tournament Series Livewell/Baitwell Pumps are Powerful and long lasting, Tournament Series Cartridge Pumps offer outstanding performance as well as the versatility of replacing the motor cartridge if the motor expires.
-
maXtek Washdown Pump KIT
Product Code: NS110
MAXTEK Washdown Pump KIT-12v-self priming, smooth and quiet flow
The pack includes:
- 12 Volt 60 PSI Pump
- Filter strainer
- Trigger Nozzle with quick connect spray gun
- Coil type delivery hose
- Two Straight NPT hose connections ( elbow options below )
Self Priming, pressure switch control, Run Dry Protected, Quiet Operation, Easy Clean Filter.
Specs:
Voltage: 12 Volt
Amps: 17.2A
Pressure: 4.8bar / 60PSI
Flow Rate: 20.0 L/min
Dimensions: 220mm x 150mm (PUMP)BLISTER PACK KIT: 400 x 440 x 130mm
-
Novakool 122 L Fridge freezer
Product Code: NCR4500
NOVA KOOL 122 Litre Fridge/Freezer
-
Door Security Latch for NovaKool Fridge/Freezer
Product Code: NCLATCHS
Door Security Latch for NovaKool Fridge/Freezer
-
Hinge Bearing for NovaKool Fridge/Freezer
Product Code: NCHINGEB
Hinge Bearing (blk nylon) for NovaKool Fridge/Freezer
Bearing only - used for pin to go through in the hinge assembly.
contact us for pricing
-
NOVA KOOL Evaporation Plate
Product Code: NCF1
F Plate Kit - 1 plate kit
-
NovaKool multi-voltage Power Control Module
Product Code: NCF0FK
100 - 240VAC Power & Control Module for BCD-35 compressors.
-
BEP 36 Way Circuit Breaker Panel NC36LD
Product Code: NC36LD
BEP 36 Way Cruiser Series Circuit Breaker Panel NC36LD Features: * Marine Grade powder coated aluminium * Airpax circuit breaker * Stylish Contour Design facia * Green LED backlit labels * Red LED indicates systems on * Panels meet ABYC standards * Available with analogue meters if required.
-
BEP 32 Way Circuit Breaker Panel NC32YD
Product Code: NC32YD
BEP 32 Way Cruiser Series Circuit Breaker Panel NC32YD
-
Self Centering Keel Roller – Yellow – 290mm x 75mm
Product Code: N36
Self Centering Keel Roller– Yellow – 290mm x 75mm
Material: Poly Vinyl
Length: 290mm
Overall Diameter: 75mm
17mm shaft insert - designed to suit 5/8" diameter pin -
Spool Roller -Yellow – 100mm x 69mm
Product Code: N34
Spool Roller – Yellow – 100mm x 69mm
Material: Poly Vinyl
Length: 100mm
Overall Diameter: 96mm
15mm hole - designed to suit 5/8" diameter pin -
Sarca Straight Roller 63mm
Product Code: N33
A = 25mm
B = 63mm
-
Bow Roller – Yellow – 75mm x 75mm
Product Code: N32
Bow Roller– Yellow – 75mm x 75mm
Material: Poly Vinyl
Length: 75mm
Overall Diameter: 75mm
12mm hole - designed to suit 1/2" diameter pin -
Sarca V Roller 63mm
Product Code: N31
A = 50mm
B = 63mm
-
Bow Roller – Yellow – 95mm x 92mm
Product Code: N30
Bow Roller – Yellow – 95mm wide x 92mm
Material: Poly Vinyl
Overall Diameter: 92mm
12mm hole - designed to suit 1/2" diameter pin -
Side Guide Roller
Product Code: N26
Rubber Side Guide Roller
Hard Wearing Black Rubber
Length: 230mm
Width: 50mm
Bolt Hole: 12.7mm
N26 -
Keel Roller – Black – 100mm x 75mm
Product Code: N24
Keel Roller – Black – 100mm x 75mm
Material: Rubber
Length: 100mm
Overall Diameter: 75mm
12mm hole - designed to suit 1/2" diameter pin -
Snubber – Vee Bow Chock
Product Code: N15
Snubber - Vee Bow Chock
Hard Wearing, Non Marking, Black Rubber
Jaw Opening: Approx 70 degrees
Base Footprint: 150mm x 50mm
Bolt Hole Centres: 35mm x 128mm -
Snubber – Cotton Reel Style Bow Chock
Product Code: N14
Snubber - Cotton Reel Style Bow Chock
Hard Wearing Black RubberWidth: 75mm
Outer Diameter: 98mm
Inner Diameter: 32mm
Bolt Hole: 12.7mm
N14 -
Euroglide 3″ Bow Roller Red
Product Code: N13
Euroglide 3" Bow Roller Red
High Strength 100% Polyurethane
No bushes required, self lubricating.Width: 69mm
Diameter: 63mm
To Pin / Bolt Hole Size: 12mm -
Euroglide 2″ Bow Roller Red
Product Code: N12
Euroglide 2" Bow Roller Red
High Strength 100% Polyurethane
No bushes required, self lubricating.Width: 50mm
Diameter: 50mm
To Pin / Bolt Hole Size: 1/2" -
Thru-mount Bow Roller with guides
Product Code: N08
Bow Roller with guides
Suitable as a thru-mount boat anchor roller
Marine Grade 316 Stainless SteelN08 - Dimensions:
A) 55mm B) 75mm C) 155mm D) 16mm
Overall width: 162mm -
Bow Roller – 50mm diameter
Product Code: N07
Multi purpose bow or deck roller
316 Stainless Steel
Frame:
72mm (h)x 60mm (w) x 33mm (d)
Nylon Roller:
50mm (diameter)
48mm (wide) -
Snubber Block – Black – 100mm x 100mm
Product Code: N-20
N20 Snubber Block -Black – 100mm x 100mm
Material: Rubber
Length: 100mm
Width: 100mm
12mm hole - designed to suit 1/2" diameter pin -
Maxwell Vertical Capstan (600 watt)
Product Code: MVC500
The stainless steel (AISI 316) fluted capstan VC series is designed for simple, low-cost anchor recovery on smaller boats and rope hauling on larger vessels.
Features and benefits:
- Vertical design suits smaller powerboats or sailboats and can be utilised for anchor rodes, as a docking capstan on larger craft, or auxiliary line hauling from any direction
- High quality, hard wearing stainless steel (AISI 316) above deck components
- Functional rope hauling from any direction using a fluted, snag-free warping drum for positive control of all ropes
- Simplified through deck installation by modular design and precise alignment of gearbox to the topworks
- Alternative gearbox/motor positions accommodate virtually all installation situations
- Anodized aluminium gearbox and spacer on VC 500 and VC 1000 models
- Heavy duty, dual direction motors, designed for marine operations
- Easily disassembled for servicing
- Can be mounted horizontally for use as a pot hauler or davit winch
-
Maxwell Vertical Capstan (1000 watt)
Product Code: MVC1000
The Maxwell VC1000 12 Volt Vertical Anchor Winch Capstan has a dual direction 1000 Watt motor and is suitable for rope only.It is an extremely versatile vertical capstan for use as a rope only anchor winch, or as a general purpose electric winch for rope hauler, pot hauler or davit winch.
