Round Pan holder for Italian gas cookers
-
Twin Pan Holders for Italian Cookers
Product Code: PV1371
-
Power-Socket, USB Ports & Voltage-Meter Surface Tent Mount
Product Code: PS-2023
A stylish and easy to install Voltage Meter, double USB ports and Cigarette Lighter / Power Socket that can be mounted in any direction. The sockets are easy to change position or direction.
-
Power-Socket/USB/Voltage-Meter Panel Mount
Product Code: PS-2022
A stylish and easy to install Voltage Meter, double USB ports and Cigarette Lighter / Power Socket unit can be installed to suit your preference of position.
- Power Socket Input: 12V 20A DC - 24V 10A DC
- Double USB Port Socket Input: 12-24V DC, Output: 5v 3.1A DC
-
Power Socket with Dual USB Surface mount
Product Code: PS-2021
An easy to install double USB ports and Cigarette Lighter / Power Socket unit.
- Power Socket Input: 12V 20A DC - 24V 10A DC (Cigarette lighter socket)
- Double USB 2.0 Port Socket Input: 12-24V DC, Output: 5v 3.1A DC
- 12V Auto Outlet with 2 x USB Charge Ports
Perfect for use with cellular phones, iPads, computers, cameras, radar detectors, portable DVD players, etc. The plug can be rotated 90 degrees.
-
USB Double port Socket and Voltmeter Panel Mount
Product Code: PS-2020
Marine terminal socket for plugging in auxilary USB powered product
USB Double port Socket and Voltmeter Panel Mount
- 12-24 DC 5V, 3.1A DC Total
- Watertight cap
- 5V -30V Voltmeter Socket
-
USB Dual Charger and Cig Socket – Black
Product Code: PS-2019B
Deluxe Dual USB Charger and 12V Cigarette Socket – Black
-
USB Dual Charger and Cig Socket
Product Code: PS-2019
Marinco Deluxe Dual USB Charger and 12V Receptacle
-
USB Double ports Socket
Product Code: PS-2018
Waterproof Marine terminal socket for plugging in auxiliary USB powered product
USB Double Port Socket- 12-24 DC
- Keep water out with watertight cap
- 5V 31.A
- Flush fitting for panel mount
-
12V Power Socket for under Dash or Panel Mount
Product Code: PS-2016
This handy fitting enables you to position a USB outlet under a wooden, fibreglass or metal dashboard complete with rubber plug moisture/dust cover. Alternatively, you can remove the actual USB insert to panel mount the USB socket. The insert requires a 22mm dia hole but it will go through upto 38mm of panel so your panel can be wood if necessary.
-
USB Dual Charger with Waterproof Cap
Product Code: PS-10120
Marine flush Mounted terminal socket for plugging in auxilary USB powered product
- Weather Sealing cap
- Panel mount – Standard Rectanglar switch replacement
- Material: Plastic, Black
- Voltage: 6-30 VDC
- Port: Dual port
- Amp: 3.1 Amps
Dimensions
49mm (h) x 25mm (w) x 51mm (d) -
Comet Pinpoint Red Hand Flare (SOLAS approved)
Product Code: PRHF27002
Red Handflare
-
Dinghy Flare Pack
Product Code: PPAK27041
Dinghy Flare Pack in waterproof container.
-
Power Boat Flare Pack
Product Code: PPAK27040
Power Boat Flare Pack in waterproof container.
Contains:
2 x red hand flares
1 x orange smoke torch -
Cruising Flare Pack
Product Code: PPAK27023
Cruising Flare Pack in waterproof container.
Contains: 1 x parachute distress rocket, 2 x red hand flares , 1 x orange smoke torch -
Coastal Boating Flare Pack
Product Code: PPAK27022
Coastal Boating Flare Pack in waterproof container.
Contains:
2 x parachute distress rocket,
2 x red hand flares,
2 x orange smoke torch -
Inshore Boating Flare Pack
Product Code: PPAK27021
Inshore Boating Flare Pack in waterproof container.
Contains: 2 x red hand flares , 2 x orange smoke torches -
YNZ CAT 3 4 & 5 Flare Pack
Product Code: PPAK27019
YNZ CAT 3, CAT 4 & CAT 5 Flare Pack in waterproof container.
2017 Requirements – Contains:
2 x red hand flares
2 x orange smoke torchPlease note that flares are classed as dangeous goods and therefore incur a shipping cost of $45 for North Island delivery or $55 for South Island delivery. Contact us to save on shipping cost if you are ordering multiple items.
-
YNZ CAT 1 & CAT 2 Flare Pack
Product Code: PPAK27017
YNZ CAT 1 & Cat II Flare Pack in waterproof container.
2017 Requriement – Contains:
4 x red hand flares
2 x orange smoke torchPlease note that flares are classed as dangeous goods and therefore incur a shipping cost of $45 for North Island delivery or $55 for South Island delivery. Contact us to save on shipping cost if you are ordering multiple items.
-
Mount for Pot Hauler
Product Code: POTHMNT
Mount for MTK9000 MaXtek Electric Pot Hauler.
Mount only.
Click here for the Maxtek Pot Hauler. -
AdvanSea S400 NMEA Repeater
Product Code: PL67039
Product Variations: AdvanSea S400 NMEA Repeater -
50/200kHz Thru-Hull Depth Transducer
Product Code: PL61669
Airmar plastic thru-hull depth transducer.
Frequency: 50/200 kHz
Drill hole: 51mm diameter (2”)
Plug connection: PhonoLow-profile, plastic transducer housing with minimum drag
Right angle cable exit offers low headroom and protection when transducer is stepped on
Connects to most 50/200kHz including the advanSea C.56 and Navman Northstar and Simrad units
-
230VAC – 12V Adaptor
Product Code: PL58593C
AC/DC Adaptor
-
Speed & Temp tdx, Thru-hull
Product Code: PL40640
Removeable plastic thru-hull fitting
Drill hole: 48mm
Cable Length: 8m -
Paddle wheel for Thru hull Speed tdx – advanSea
Product Code: PL17408
Paddle wheel for through hull Speed tdx - advanSea
Works with AdvanSea 40640 thru-hull transducer
-
Comet Buoyant range Smoke Signal
Product Code: PBOS27003
Comet Orange Day Smoke Signal
Compact, flat top, day time distress signal designed to be easy and safe to handle. It provides effective position marking during rescue operations and can be used to indicate wind direction, producing dense orange smoke for a minimum of 3 minutes. -
Glass Chimneys for Lamp
Product Code: P91502-05
Glass Chimneys for 91502 Lamp
Chimney Measurements
34mm OD at top
62mm OD at middle
37mm ID at base
112mm high -
AM/FM Radio Seamaster Pro Antenna Black 1.0m
Product Code: P6783
This range of "no cable" antennas has been designed for boaties who want to remove and refit their antennas as required.
These antennas need to be mounted on our SeaMaster Pro range of mounts.
- 1.0m UltraGlass antenna
- Slimline features of this antenna make it a popular choice for the smaller boats
- Mastmount installation
- Fits P6714 mount
-
VHF Seamaster Pro Antenna Black 1.0m
Product Code: P6782
This range of "no cable" antennas has been designed for boaties who want to remove and refit their antennas as required. These antennas have 3dBi gain. These antennas need to be mounted on our SeaMaster Pro range of mounts.
-
VHF/Cellular Stainless Steel QuickFit Mount-Black cable.
Product Code: P6759
VHF/Cellular stainless steel fold down mount. Product Code P6759
-
Pacific Am/Fm Black Base Heavy Duty.
Product Code: P6754
Can be used for LongReach Pro Series Am/Fm antennas. 5m of cable is wired into the mount. Base plate dimensions: 93 x 66mm.
Weight/Height: 560g/132mm
Base Plate: 93 x 66mm
Hole Centres/Sizes: 73 x 46mm / Hole Diameter – 8mm
-
AM/FM SeaMaster Pro Quickfit Base – Black
Product Code: P6714
The Pacific Aerials P6714 AM/FM Fold Down Mount can be used for SeaMaster Pro Series AM/FM antennas. 5m of cable is wired into the mount.
Pacific Aerials P6714 AM/FM Fold Down Mount Features:Model number: P6714
Use in side or deck mount installations
-
VHF Antenna Adj Base – QuickFit Black
Product Code: P6711
Adjustable Base to suit QuickFit style aerials
5m Cable is attached to base which allows the antenna to be easily removed and remounted. -
AM/FM Aerial 1.8m Quick-fit – Black
Product Code: P6703
1.8m UltraGlass antenna with glass filled nylon ferrule. Enables AM/FM coverage further out to sea.
1.8m VHF Black VHF available Part # 7370BLK
Note:
Contact us for international shipping costs. -
1.8M VHF Aerial / Black Antenna
Product Code: P6653
Full performance antenna - Antenna is hardwired with 5m of cable. The stainless steel ferrule makes this an elegant-looking antenna with excellent performance.
-
VHF Aerial 4.9m Ultraglass Longreach Classic
Product Code: P6503
Pacific P6503 - VHF 4.9M ULTRAGLASS COLINEAR ANTENNA
-
HF/SSB 4.9m Two-section Antenna
Product Code: P6501
Pacific P6501 - HF/DSC 4.9m Long Reach Antenna
Two piece anntenna that is finished, with glossy UltraGlass and stainless steel couplers to enhance the appearance and strength of the antenna
Specifications
- FrequencyHF/SSB 2-30MHz
- RadomeUltraglass
- FerruleStainless Steel
- Antenna TypeWhip
- "Marine Gain"6dB
- Power Rating1kw PEP
- Height4.9m
-
Masthead VHF 1.0m Antenna with bracket
Product Code: P6184
Masthead VHF 1.0m UltraGlass Antenna complete with bracket. Product Code P6184
-
VHF/Cellular Stainless Steel QuickFit Mount
Product Code: P6159
VHF/Cellular stainless steel fold down mount. Product Code P6159