Made of plastic, 6’ Power cord, instant defrost for windshield or dash-board or use as a heater for small areas, can adjust 45° up or down, 90° right to left
Size:152.4mm(L) x 114.3mm(W) x 77.8mm(H)
12V, 150W
Made of plastic, 6’ Power cord, instant defrost for windshield or dash-board or use as a heater for small areas, can adjust 45° up or down, 90° right to left
Size:152.4mm(L) x 114.3mm(W) x 77.8mm(H)
12V, 150W
Kayak Paddle with split two piece shaft for easy disassembly.
Two blade angle options and anti drip rings.
5m High Performance Engine Control Cables providing all the best features:
• Patent pending splined core for superior response and feel, especially in the toughest shift cable routing.
• Black HDPE outer casing for environmental durability
• Steel armour casing
• Teflon inner core to ensure extremely low friction
• High tension strength with small bending radius
• Exceeds all industry boat standards
• State-of-the-art manufacturing cell assures total consistency
• Manufactured and certified to ISO 9001 / 2000
Suitable for:
Standard inboard engine controls that accept type 33c
YAMAHA, HONDA, SUZUKI Outboards
Compatable with Telfex No. CC332
Submersible AML Marine Bilge Pump 1000 gph = 3,785 l/hr These pumps are CE rated and manufactured to ISO 9001 standard Detachable base with debri filter facilitates installation.
New to the market these high powered flood lights will provide years of trouble free lighting for your vessel.
Made using Diecast Aluminium with a PC lense, world leading OSRAM LED’s and along with a waterproof rating of IP68 they are built tough for the marine environment.
Dimensions 170mm x 80mm
M.O.B. Rescue System with 20m Rope.
ConnectPro trolling motor plug and receptacle
Features a locking plug and receptacle with a spring clamping connection that provides a secure electrical contact.
Maximun rating is 40 amps
A general purpose valve for water and other low viscosity fluid applications.
Suitable for water on/off supply control. Suitable for use in galley pumps, wiper systems and toilet supply lines.
Flexofold™ Propellor Anode
Fits standard 3-blade Flexofold propellers from 15" through 24"
Base Diameter: 2-5/8"
Weight: 0.188kg
Cadmium-free Aluminium
Martyr - Yamaha Aluminium Anode Kit For 80-90-100HP Outboard
To obtain a bracket-mount compass, please order a flushmount compass AND add this bracket.
Bracket kit includes actual bracket and bespoke screws.
Flashing LED Personnel strobe light
Stainless Steel LED Berth Reading Light
Stainless steel with ball joint head for rotation and base mounted on/off switch
Dimensions:
Base: 65mm(Dia.)
Housing opening: 52.8mm(Dia.)
Pair of mooring line rate stoppers
West System 205 Fast Hardener
Available in 200ml, 800ml and 2 litres
West System 206 Slow Hardener
Available in 200ml, 800ml and 2 litres.
New in 2006 the panel mount range of battery switches are designed specifically for panel mount applications. This range gives a very compact, versatile solution with the following features..........
Features:
•Fits standard BEP battery switch label range.
•CSK recessed for surface mount application
•Standard 2 1/16" hole cut out (Same as standard gauge hole)
•Ignition Protected
•Full access for cables with no restrictions
•Fit into Contour Connect Panel
701 Specifications:
•Continuous Rating: 200 Amps DC
•Intermittent Rating: 300 Amps DC
•Cranking Rating: 1000 Amps DC
•Voltage Rating: 48 Volts DC
•Operation: 1-2-Both-Off
•Mounting: Recessed or Surface
•Ignition protected
•Termination Stud Size:
3 x 5/16"
•Dimensions: 69 x 69 x 75h mm
(2.75 x 2.75 x 3h inches)
•Tin plated copper studs and nuts
Radar Reflector
Complies with the R.O.R.C
Collapses and lies flat for storage
305mm(L) X 415mm(H) X 305mm(W)
Premium Martyr Aluminium anode kit to suit Bennett Trim Tabs
Complete Kit including 2 x anodes’ and mounting hardwware
GME’s range of Australian Made marine AM/FM antennas lead the market in performance and quality.
GME’s range of Australian Made marine AM/FM antennas lead the market in performance and quality.
GME’s range of Australian Made marine VHF antennas lead the market in performance and quality.
GME’s range of Australian Made marine VHF antennas lead the market in performance and quality.
VHF 1.0m Stainless Steel Antenna. Product code P6091 VHF 1.0m antenna. The P6091 offers real value for money - full performance and durable construction.
New Zealand's most popular trailer coupling, these are fitted as original equipment by major trailer manufacturers.
Cast in steel, these couplings are extremely strong yet simple to operate.
Hull Anode 'O' Plate - medium Hull w/Wire
Martyr Cadmium-free Aluminium
Dimensions: 152mm x 102mm x 19mm
Weight: 0.77
Martyr Cadnium free anodes
5.25m High Performance Engine Control Cables providing all the best features:
• Patent pending splined core for superior response and feel, especially in the toughest shift cable routing.
• Black HDPE outer casing for environmental durability
• Steel armour casing
• Teflon inner core to ensure extremely low friction
• High tension strength with small bending radius
• Exceeds all industry boat standards
• State-of-the-art manufacturing cell assures total consistency
• Manufactured and certified to ISO 9001 / 2000
Suitable for:
Standard inboard engine controls that accept type 33c
YAMAHA, HONDA, SUZUKI Outboards
Compatable with Telfex No. CC332
Suits AW36XX antennas.
Suits AW36XX antennas.
5 Way Spray Proof Switch Panel with 3A USB Charger
• Compact Panel size
• Sprayproof inline fuse holders with fuses aincluded 15A x3
• Waterproof power sockets three way & five way only
• 28 Preprinted labels included
• Waterproof to IP56
Dimensions: 110mm x 125mm