Wide head Nylon Rod Holder complete with weathertight Cap
Head: 107mm x 85mm,
Length: 232mm, ID:42mm
Made in Italy
Colour
Black 4409B
-
Black Rod Holder – Wide Head with Cap
Product Code: 4409B
-
Black Plastic 28mm Bung and Mounting Base
Product Code: 4096
Transom drain plug (bung) complete.
-
Black Humpback 316 SS Cleat 8″ (88307)
Product Code: 88307
Black Humpback 316 SS Cleat 8" (88307) -
Black Humpback 316 SS Cleat 6″ (88306)
Product Code: 88306
Black Humpback Cleat – 316 SS
-
Black Grab Handle – 248l
Product Code: 143748
Grab handles that easily fit to your hand for a secure grip
Easy to Install - Fit's most RV's, Campers, Caravans, Motor Home's and Boats.Dimensions Overall: 248m (l) x 30mm (wide) x 55mm (h)
Mounting holes recessed behind cover of ID 5.5mm
-
Black Fuel Filler Angled
Product Code: 99DFCCAB1
Exclusive, industry-leading overpressure relief safety valve
Exclusive built-in nozzle retention
Integrated flame/spark arrestor
Designed and tested to prevent water from entering the fuel system
ISO 13331 nozzle mating standards
ISO 10088 and CE compliant
Meets ABYC, USCG, and EPA diurnal emission standards
ISO symbol compatible with CE and worldwide marking requirements
-
Black Fender G Series 25 x 76cm (7238)
Product Code: 7238
Black Fender G Series 25 x 76cm (7238) -
Black Fender G series 22 x 68cm (7237)
Product Code: 7237
Black Fender G series 22 x 68cm (7237) -
Black Fender G Series 17 x 59cm (7236)
Product Code: 7236
Black Fender G Series 17 x 59cm (7236) -
Black Curved 4 Grid Louvered Ventilators (4386)
Product Code: 4386
Black Curved 4 Grid Louvered Ventilators (4386) -
Black Cone 33cm – Day Sign
Product Code: 9319
Black Cone 33cm - Day Sign
-
Black Ball – 30cm Day Sign Anchor
Product Code: 9320
Black Ball
Day Sign Anchor
30cm DiameterSupplied by Plastimo
-
Black (43001-BK)
Product Code: 43001-BK
Black (43001-BK) -
Bilge Pump Switch Bulk (3206)
Product Code: 3206
Bilge Pump Switch Bulk (3206) -
Bilge Pump Switch Blister (3206-BP)
Product Code: 3206-BP
Bilge Pump Switch Blister (3206-BP) -
Bilge Pump Float switch, DC 12V/24V
Product Code: 91549
Nuova Rade Float switch, DC 12V/24V, 15Α max(at 12 volt) This float switch is designed to automatically control the on – off cycle of bilge pumps. Designed with a reliable rolling-ball and switch system that prevents rapid on/off cycling found on some switches and is safer than mercury switches. When water lifts the chamber buoy up to 6 cm, the switch automatically turns the bilge pump on until the water is dry.
-
Bi-Colour Pole Navigation Light
Product Code: 71312
LED Navigation Light for mounting on the bow deck of your boat.
-
BEP Water Proof Contour Panel – 6 way
Product Code: CSP6-F
Popular BEP switch panel.
-
BEP Twin O/B, 3 bat. banks-125A DVSR battery Dist. cluster
Product Code: 717-140A-DVSR
The 717-140A-DVSR is designed for twin engine installations.
-
BEP Triple Battery Switches with DVSR – Flush mount
Product Code: CC-803N
The BEP CC-803N offers a more modern, flush mounted switch vs the standard 717 cluster
The CC-803N is supplied with cables to allow for horizontal or vertical configurations.
These components can also be easily removed and reconfigured if the factory layout does not suit your application.
-
BEP Switch 1101-BK On/Off 20A Rocker
Product Code: 3216
Contour 1100 Series Rocker Switch - 1101-BK
-
BEP Remote Operated Motorised Battery Switch – 275Amps Deuts
Product Code: 701-MD-D
Remote operated battery selector switch with deutsch connector
275A -
BEP Remote Operated Motorised Battery Switch – 275Amps
Product Code: 701-MD
BEP 701-MD Remote Operated Motorised Battery Switch - 275Amps
-
BEP Relay -DVSR 140 Amp – 12/24 Volt
Product Code: 710-140A
The DVSR (Digital Voltage Sensing Relay) allows charging of two independent battery banks from a single charging source. When the voltage on the start battery rises to a charged level, the DVSR engages allowing the 2nd battery to charge. When charging stops and voltage falls, the DVSR will disengage, isolating the two batteries from each other.
-
BEP Multi Bus Bar 6 Way x 2
Product Code: BB-6W-2NC
The multi bus bars enables either positive and negative (DC) buses on one block or earth and neutral (AC) buses on one block.
-
BEP Multi Bus Bar 12 Way x 2
Product Code: BB-12W-2NC
The multi bus bars enables either positive and negative (DC) buses on one block or earth and neutral (AC) buses on one block.
-
BEP Multi Bus Bar – 150Amps
Product Code: BB-4S-150A
The multi bus bars enables either positive and negative (DC) buses on one block or earth and neutral (AC) buses on one block.
-
BEP M331 Splash Proof Boot
Product Code: M331
BEP M331 Splash Proof Boot for metal BEP toggle switches.
-
BEP LARGE C/Breaker Single Pole 100A (CBL-100A-SP)
Product Code: CBL-100A-SP
BEP LARGE C/Breaker Single Pole 100A (CBL-100A-SP) -
BEP Key For 701 Switch
Product Code: 701-KEY
Replacement BEP Key For 701 Switch
-
BEP Key For 700 Switch
Product Code: 700-KEY
Replacement BEP key for 700 switch
-
BEP Insulated twin stud, 6mm Black
Product Code: IS-6MM-2
BEP Insulated twin stud, 6mm Black
6mm tinned copper stud with high temperature plastic base
Dimensions: 42.25mm (L) x 36mm (W) x 31mm (H)
25.5mm stud centres
24mm fixing hole centres -
BEP Insulated twin stud linked, 10mm Black
Product Code: IS-10MM-2L
BEP Insulated twin stud linked, 10mm Black
10mm tinned copper stud with high temperature plastic base
Dimensions: 42.25mm (L) x 36mm (W) x 31mm (H)
25.5mm stud centres
36mm fixing hole centres -
BEP Insulated twin stud 6mm Black with cover
Product Code: IS-6MM-2/DSP
BEP Insulated twin stud, 6mm Black with cover
6mm tinned copper stud with high temperature plastic base
Dimensions: 42.25mm (L) x 36mm (W) x 31mm (H)
25.5mm stud centres
24mm fixing hole centres -
BEP Insulated Studs With Cover
Product Code: 704-4S
The 704-4S was designed for multiple heavy duty connections which need to be isolated from each other. This model completes the range of heavy duty connectors and meets ABYC standards for exposed terminals.
