It is ideal for any tight spot that needs some additional airflow whether it is in the corner of the V-berth or under a cupboard in the galley.
-
12v Cooling fan – Clip Mount
Product Code: 13064
-
12v instant defrost Ceramic Heater for windshields
Product Code: 4528
Made of plastic, 6’ Power cord, instant defrost for windshield or dash-board or use as a heater for small areas, can adjust 45° up or down, 90° right to left
Size:152.4mm(L) x 114.3mm(W) x 77.8mm(H)
12V, 150W
-
12v Portable Air Compressor
Product Code: 31400
30mm single cylinder portable mini air compressor -
12V Power Socket for under Dash or Panel Mount
Product Code: PS-2016
This handy fitting enables you to position a USB outlet under a wooden, fibreglass or metal dashboard complete with rubber plug moisture/dust cover. Alternatively, you can remove the actual USB insert to panel mount the USB socket. The insert requires a 22mm dia hole but it will go through upto 38mm of panel so your panel can be wood if necessary.
-
230VAC – 12V Adaptor
Product Code: PL58593C
AC/DC Adaptor
-
3 Gang Switch Panel – Dual USB + Power Outlets
Product Code: 10169
A useful panel for most small boat applications
Contains 3 individual rocker On//Off switches for navigation, bilge and electronics plus handy power outlets- Dual Port USB charger
- Cigarette Lighter / Power Socket
- Waterproof Rating: Splashproof
- Individual blue LED indicator lights
-
3 Way Fused Switch Panel with USB Charger
Product Code: 10140
Waterproof Switch Panel with USB Charger
• Material: UV stabilized plastic panel, Black colour
• Voltage: 12VDC
• UV approved neoprene capped switch x 3
• Cabled with fuses + USB charger
-
- Compact Panel size
- Sprayproof inline fuse holders with fuses are included with all compact models
- Waterproof power sockets three way & five way only
- Power socket rated at 16A
- Waterproof to IP56
- Blister Pack Option
-
40A 2-Wire Trolling Motor Plug & Socket
Product Code: 7224
ConnectPro trolling motor plug and receptacle
Features a locking plug and receptacle with a spring clamping connection that provides a secure electrical contact.- 40Amp continuous rating
- O-ring seal for waterproof connections
- Weather resistant plug cover
- Corrosion resistant, plated brass electrical components
- Accepts up to 10mm² wire
- Ergonomic contoured grip for easy hook-up and ground blade alignment
Maximun rating is 40 amps
-
5 Way Spray Proof Switch Panel with USB Charger
Product Code: 10160
5 Way Spray Proof Switch Panel with 3A USB Charger
• Compact Panel size
• Sprayproof inline fuse holders with fuses aincluded 15A x3
• Waterproof power sockets three way & five way only
• 28 Preprinted labels included
• Waterproof to IP56Dimensions: 110mm x 125mm
-
5 Way Spray Proof Switch Panel with 16Amp power socket
-
6 Gang Circuit Breaker Wave Panel
Product Code: 10018
* 6 Individual switches with LED Indicator Lights
* Resettable Circuit Breakers
* Spade wiring connectors and mounting hardware included
* 28 Pre- selected label sheet supplied
* CE Approved
Dimensions
160mm (h) x 100mm (w)
Requires 30mm depth for wiring -
6 Gang Fuse Distribution Block
Product Code: 11514-06
Fuse Holder - 6 gang blade fuse Holder - with LED indicators
87mm x 62mm x 34mm high, 6 x spade type terminals, with single post. 4 mounting holes
LED indicators numbered 1-6, 100amp max
-
6 Gang Waterproof Circuit Breaker Panel
Product Code: 10016-BK
Marine grade waterproof switch panel with individual circuit Breakers
Waterproof panel and switches Panel is ABS plastic construction each switch has individual light which illuminates when switch turned on
Each Rocker Switch is individually supplied with own Resettable Circuit Breaker
1 x 5A 3 x 10A 2 x 15Amp circuit breakers
Supplied with Preprinted Labels so you can select what ever item you want to switch and have the appropriate label
Dimensions 190mm x 130mm
Cut-out 160mm (l) x 80mm (w) 60mm depth required behind for wiring
Voltage - 12v Colour - Black facia as per image
-
6 Way Spray Proof Switch Panel
Product Code: 900-6PAN-BP
• Compact Panel size
• Spray proof inline fuse holders with fuses are included with all compact models
• Waterproof to IP56
• Supplied with label sheet
Dimensions:
95mm(3.75")H x 107mm(4.25")W x 75mm(2.9")D
-
SALE!
600A Battery On/Off Switch
Product Code: 720-C
Single Pole Heavy Duty Switch
Rated at 600 amps continuous and 2500 amps cranking it is well suited to larger vessels.- Recessed or surface mounted
- Power supply voltage: 12 – 48v
- Cranking Rating: 2500A
- Continuous load current: 600A
Dimensions: 110 x 110 x 100mm
Weight: 0.496kg
-
70A 3-Wire Trolling Motor Plug & Receptacle Combo
Product Code: 7223
Marinco 70A plug and receptacle for modern trolling motors in a compact, waterproof footprint. The plug features an integrated strain relief and thumbprint locator to mate with the keyed receptacle.
70A continuous rating
-
70a Trolling Motor Plug
Product Code: 7222
Marinco 70A plug and receptacle for modern trolling motors in a compact, waterproof footprint. The plug features an integrated strain relief and thumbprint locator to mate with the keyed receptacle.
70A continuous rating
-
70a Trolling Motor Receptacle
Product Code: 7221
Marinco 70A plug and receptacle for modern trolling motors in a compact, waterproof footprint. The plug features an integrated strain relief and thumbprint locator to mate with the keyed receptacle.
70A continuous rating
Universal design for 2 or 3-wire configuration 12V, 24V, 12/24V, 24/36V, 36V or 48V systems
Corrosion resistant, plated brass electrical components
Watertight sealing cap
Accepts up to 6 AWG wire
-
713 – Battery Switch Label Set
Product Code: 713
Label sheet (14 labels) For 700, 701, 720 & 721 switches
-
Absolute Marine Snap Back Cap – PINK
Product Code: AMCAP-P
UFlex Pink Trucker Cap
- 5 panel structured snap back trucker cap
- Curved peak cap
- Double poly snap back enclosure
- 6 rows of stitching on the curved peak visor
- Elasticated Sweatband
- Foam behind backing crown
- 60% Cotton, 40% Nylon
-
AC VOLT TRANSDUCER FOR DIG & CZONE MC12
Product Code: AC-VSEN-4
AC Voltage Transducer for Dig and CZone
-
AdvanSea S400 NMEA Repeater
Product Code: PL67039
Product Variations: AdvanSea S400 NMEA Repeater -
Analogue Battery Voltmeter with 3 Inputs
Product Code: 600-VM
Panel Mount Volt meter
The contour analogue DC meter (expanded scale) is designed for panel mounting and has a switch in order to select the level in 3 different battery banks.
- Expanded scale
- Green LED backlit meter
- Colour coded for easy viewing
- Monitor 3 independant battery banks
-
Anchor Foot Switch for Windlass Up & Down For control of (connection to) a solenoid Windlass foot switch for all Anchorlift or similar windlasses Suitable for both 12 and 24 Volt applications. White: 90900W Black: 90900B -
Anchor Up / Down Switch – with On/Off
Product Code: 90801
Anchor Up / Down Switch - with Safety On/Off Splashproof Windlass switch for control of an anchor windlass reversing solenoid 12 or 24 Volt Prewired with fuse and safety switch. Safety switch is a useful addition as it prevents the Up/Down switch being inadvertantly operated. Dimensions: 90mm x 57mm -
AutoAnchor AA560
Product Code: 9321AA
Panel Mount Chaincounter and Control The AA560 electronic windlass control and rode counter (chain counter) replaces the AA500C and AA550RC from August 2007. This means a single AA500 series product for all-chain or rope/chain windlasses. -
AutoAnchor Rodecounter and Windlass Controls - Parts and Sensor Cables For Single Stations select: Add 1 x sensor cable length to run from windlass to display. For Dual Stations select: 1X sensor cable from the windlass to the main unit, 1 x T-junction, 1 x cable from one display to the next display. -
Superior quality marine cable and battery cable for use in marine battery wiring, windlass wiring, and similar applications. All cable meets or exceeds all the requirements of regulatory bodies. Our cable features a durable yet flexible PVC insulation that is resistant to acid, alkalis, abrasion, flame, gasoline, oil, ozone, moisture, and fungus. Flexible tinned copper stranding of our cable makes it easy to route and mould to any application as well as absorb vibration to avoid damage to connections. Now available in Black and Red Please enquire for 100m Coil Special Pricing -
Battery Isolating Switch with Capped Key- maXtek
Product Code: 10097-BP
maXtek Water-resistant Master Switch excellent for both marine and automotive use. Designed for panel flush mounting. Supplied with PVC Capped Key which stays in place when ON and can be removed in the OFF position.
-
Battery Mini On / Off Switch
Product Code: 10006
Battery switch, compact selector switch, Housed in the same dimensions as a 701-S
* Continuous Rating: 275 Amps DC
* Intermittent Rating: 1250 Amps DC
* Operation: Selector On / Off
* Mounting: Recessed or surface
* Termination Stud Size: 3 x 5/16"
* Dimensions: 69 x 69 x 78H mm -
Battery On / Off Switch in Enclosure
Product Code: 10004
Battery switch, compact selector switch, Housed in a Enclosure
-
Battery Strap
Product Code: 3824
Battery Strap
Works great for batteries, fuel tanks and other small accessories. -
Battery Switch with Key – Surface Enclosure or Panel Mount
Product Code: 10008
Heavy Duty Battery Switch
Compact selector switch set within enclosure.
Three Mounting Options:
Surface, front panel or rear panel mount
ON/OFF Isolating Switch with remove-able key
Manufactured from nylon, nickel plated brass stud and non-corrosive marine grade metals. -
Battery Terminals – Pair
Product Code: 3843
Positive and Negative DP Battery Terminals
Lead Construction with Brass wing nuts.
Supplied as a Pair -
BEP 12 Way Circuit Breaker Panel 902A
Product Code: 902A-12V
12 way Circuit Breaker Panel with Analogue Voltmeter
12 Volt DC
3 x 5 Amp Circuit Breakers
4 x 10 Amp Circuit Breakers
4 x 15 Amp Circuit Breakers
1 x 25 Amp Circuit BreakerDimensions (mm): 200 (h) x 239 (w) x 65 (d)
-
BEP 12 Way Circuit Breaker Panel 902NMH
Product Code: 902NMH
BEP 12 Way Circuit Breaker Panel
12 Volt DC
3 x 5 Amp Circuit Breakers
4 x 10 Amp Circuit Breakers
4 x 15 Amp Circuit Breakers
1 x 25 Amp Circuit Breaker
Dimensions (mm): 115 x 351 x 65
Features:
* Marine Grade powder coated aluminium
* Airpax circuit breaker
* Stylish Contour Design facia
* Green LED backlit labels
* Red LED indicates systems on
* Panels meet ABYC standards -
BEP 12 Way Circuit Breaker Panel 902NMV
Product Code: 902NMV
BEP 12 Way Circuit Breaker Panel
12 Volt DC
3 x 5 Amp Circuit Breakers
4 x 10 Amp Circuit Breakers
4 x 15 Amp Circuit Breakers
1 x 25 Amp Circuit Breaker
Dimensions (mm): 185 x 127 x 65
Features:
* Marine Grade powder coated aluminium
* Airpax circuit breaker
* Stylish Contour Design facia
* Green LED backlit labels
* Red LED indicates systems on
* Panels meet ABYC standards -
BEP 16 Way Circuit Breaker Panel 904AM
Product Code: 904AM
BEP 16 way circuit breaker panel with analogue volt and ammeter
-
BEP 16 Way Circuit Breaker Panel 904NMV
Product Code: 904NMV
BEP 16 Way Circuit Breaker Panel 904NMV
-
BEP 2 Way Spray Proof Switch Panel
Product Code: 900-2WP
BEP 2 Way Spray Proof Switch Panel
900-2WP has 2 x on/off switches
-
BEP 20A Change-Over Toggle Switch
Product Code: 32113
BEP Two position Change-Over Switch
-
BEP 20A Momentary On/Off Toggle Switch
Product Code: 32115
BEP Two Position Momentary On – spring return switch
-
BEP 20A On-Off Toggle Switch
Product Code: 32111
Two position ON/OFF switch from BEP
-
BEP 20A On/Off/On DPDT Toggle Switch
Product Code: 32123
BEP Toggle switch
Switch configuration: Double Pole – Double Throw – On/Off/On
Compatible with Waterproof, Micro Series panels and Contour Switch Panel above
Switch Current Rating:
20 Amps @ 12 or 24 Volt DC -
BEP 24 hour Essential Circuit breaker Module
Product Code: 706-2W
706-2W 24 hour essential circuit module. Designed for smaller systems where only 2 circuit breakers are required. Supplied with 2 x 10 amp Carling CLB Series circuit breakers – push to reset.
-
BEP 24 hour Essential Circuit breaker Module (4W)
Product Code: 706-4W
The 706-4W 24hr service module consists of 1 x 5amp and 3 x 15amp push to reset Carling CLB Series thermal circuit breakers. Suitable for essential circuits such as bilge pump auto float switch supplies and stereo memory circuits. The push to reset function ensures essential 24hr circuits cannot be switched off inadvertently.
-
BEP 24 Way Circuit Breaker Panel 905AM
Product Code: 905-AM
BEP 24 Way Circuit Breaker Panel with Analogue Volts and Amp Meters
-
BEP 24 Way Circuit Breaker Panel 905NM
Product Code: 905NM
BEP 24 Way Circuit Breaker Panel 905NM
12 Volt DC
5 x 5 Amp Circuit Breakers
8 x 10 Amp Circuit Breakers
8 x 15 Amp Circuit Breakers
1 x 20 Amp Circuit Breaker
1 x 25 Amp Circuit Breaker
1 x 30 Amp Circuit Breaker
Dimensions (mm): 200 x 351 x 65
Features:
* Marine Grade powder coated aluminium
* Airpax circuit breaker
* Stylish Contour Design facia
* Green LED backlit labels
* Red LED indicates systems on
* Panels meet ABYC standards -
BEP 24 Way Circuit Breaker Panel 905NMV
Product Code: 905NMV
BEP 24 Way Circuit Breaker Panel 905NMV
12 Volt DC
5 x 5 Amp Circuit Breakers
8 x 10 Amp Circuit Breakers
8 x 15 Amp Circuit Breakers
1 x 20 Amp Circuit Breaker
1 x 25 Amp Circuit Breaker
1 x 30 Amp Circuit Breaker
Dimensions (mm): 285 x 239 x 65
Features:
* Marine Grade powder coated aluminium
* Airpax circuit breaker
* Stylish Contour Design facia
* Green LED backlit labels
* Red LED indicates systems on
* Panels meet ABYC standards -
BEP 3 Way Compact Panel with Power Socket
Product Code: 900-3WPS
BEP 3 Way Spray Proof Switch Panel with 16Amp Power Socket
Features:
• Compact Panel size
• Sprayproof inline fuse holders with fuses are included with all compact models
• Waterproof power sockets three way
• Power socket rated at 16A
• Waterproof to IP56Dimensions:
95mm(3.75")H x 107mm(4.25")W x 75mm(2.9")DSupplied with label sheet
-
BEP 32 Way Circuit Breaker Panel NC32YD
Product Code: NC32YD
BEP 32 Way Cruiser Series Circuit Breaker Panel NC32YD
-
BEP 32 Way Millennium Breaker Panel M32D
Product Code: M32D
BEP 32 Way Millennium Series Circuit Breaker Panel M32D
The Millennium Series offers compact sizing where space is at a premium as well as battery monitoring utilising BEP's multi function digital meter.
12 Volt DC
7 x 5 Amp Circuit Breakers
11 x 10 Amp Circuit Breakers
11 x 15 Amp Circuit Breakers
1 x 20 Amp Circuit Breaker
1 x 25 Amp Circuit Breaker
1 x 30 Amp Circuit Breaker
Dimensions (mm): 285 x 351 x 65
Features:
* Marine Grade powder coated aluminium
* Airpax circuit breaker
* Stylish Contour Design facia
* Green LED backlit labels
* Red LED indicates systems on
* Panels meet ABYC standards
Pricing on Request -
BEP 32114 – ON/OFF/ON Toggle Switch
Product Code: 32114
Switch Current Rating:
10 Amps @ 230 Volt AC
20 Amps @ 12 or 24 Volt DC -
BEP 32120 – (ON) OFF (ON) Toggle Switch
Product Code: 32120
BEP 32120 - (ON) OFF (ON) Toggle Switch
(ON) OFF (ON) = (momentary) off (momentary)
Switch Current Rating:
10 Amps @ 230 Volt AC
20 Amps @ 12 or 24 Volt DC -
BEP 36 Way Circuit Breaker Panel NC36LD
Product Code: NC36LD
BEP 36 Way Cruiser Series Circuit Breaker Panel NC36LD Features: * Marine Grade powder coated aluminium * Airpax circuit breaker * Stylish Contour Design facia * Green LED backlit labels * Red LED indicates systems on * Panels meet ABYC standards * Available with analogue meters if required.
-
BEP 4 Way Circuit Breaker Panel 900
Product Code: 900
BEP 4 Way Circuit Breaker Panel 900
12 Volt DC
1 x 5 Amp Circuit Breaker
2 x 10 Amp Circuit Breakers
1 x 15 Amp Circuit Breaker -
BEP 44 Way Millennium Breaker Panel M44D
Product Code: M44D
BEP 44 Way Millennium Series Circuit Breaker Panel M44D
The Millennium Series offers compact sizing where space is at a premium as well as battery monitoring utilising BEP's multi function digital meter.
12 Volt DC
10 x 5 Amp Circuit Breakers
14 x 10 Amp Circuit Breakers
14 x 15 Amp Circuit Breakers
3 x 20 Amp Circuit Breaker
1 x 25 Amp Circuit Breaker
2 x 30 Amp Circuit Breaker
Dimensions (mm): 370 x 351 x 65
Features:
* Marine Grade powder coated aluminium
* Airpax circuit breaker
* Stylish Contour Design facia
* Green LED backlit labels
* Red LED indicates systems on
* Panels meet ABYC standards
Pricing on Request -
BEP 44 Way Millennium Breaker Panel M44DH
Product Code: M44DH
BEP 44 Way Millennium Series Circuit Breaker Panel M44DH
The Millennium Series offers compact sizing where space is at a premium as well as battery monitoring utilising BEP's multi function digital meter.
12 Volt DC
10 x 5 Amp Circuit Breakers
14 x 10 Amp Circuit Breakers
14 x 15 Amp Circuit Breakers
3 x 20 Amp Circuit Breaker
1 x 25 Amp Circuit Breaker
2 x 30 Amp Circuit Breaker
Dimensions (mm): 285 x 463 x 65
Features:
* Marine Grade powder coated aluminium
* Airpax circuit breaker
* Stylish Contour Design facia
* Green LED backlit labels
* Red LED indicates systems on
* Panels meet ABYC standards
Pricing on Request -
BEP 56 Way Millennium Panel M56D
Product Code: M56D
BEP 56 Way Millennium Series Circuit Breaker Panel M56D
The Millennium Series offers compact sizing where space is at a premium as well as battery monitoring utilising BEP's multi function digital meter.
-
BEP 6 Way Spray Proof Switch Panel
Product Code: 900-6WP
BEP 6 Way Spray Proof Switch Panel
Features:
• Compact Panel size
• Sprayproof inline fuse holders with fuses are included with all compact models
• Waterproof to IP56
Dimensions:
95mm(3.75")H x 107mm(4.25")W x 75mm(2.9")D
Supplied with label sheet -
BEP 700 Easy Fit Battery Switch
Product Code: 700
After the successful release of the 701, 720 and 721 battery switches, BEP has responded to customer feedback concerning some installations where switches need to be recessed through varying thicknesses of panels.
-
BEP 701 Battery Switch – Panel Mount
Product Code: 701-PM
New in 2006 the panel mount range of battery switches are designed specifically for panel mount applications. This range gives a very compact, versatile solution with the following features:
Features:
• Fits standard BEP battery switch label range.
• Removable key
• CSK recessed for surface mount application
• Standard 2 1/16" hole cut out (Same as standard gauge hole)
• Ignition Protected
• Full access for cables with no restrictions
• Fit into Contour Connect Panel
701 Specifications:
•Continuous Rating: 275 Amps DC
•Intermittent Rating: 455 Amps DC
•Cranking Rating: 1250 Amps DC
•Voltage Rating: 48 Volts DC
•Operation: On/Off
•Mounting: Recessed or Surface
•Ignition protected
•Termination Stud Size:
2 x 10 mm (3/8 inch)
•Dimensions: 69 x 69 x 75h mm
(2.75 x 2.75 x 3h inches)
•Tin plated copper studs and nuts -
BEP 701 Medium Duty On/Off Battery Switch
Product Code: 701
The BEP 701 Contour Battery Master Switch offers a number of unique features. The highlights being the patented contour lock system, allowing it to be a stand alone unit, or locked together with other switches.
-
BEP 701-S Mini Battery Selector Switch
Product Code: 701-S
BEP 701-S Mini battery selector switch. The 701-S is the most compact selector switch available on the market. Housed in the same dimensions as the 701, and includes the same removable side plates and back cover.
-
BEP 701-S Mini Battery Selector Switch – Panel Mount
Product Code: 701-S-PM
New in 2006 the panel mount range of battery switches are designed specifically for panel mount applications. This range gives a very compact, versatile solution with the following features..........
Features:
•Fits standard BEP battery switch label range.
•CSK recessed for surface mount application
•Standard 2 1/16" hole cut out (Same as standard gauge hole)
•Ignition Protected
•Full access for cables with no restrictions
•Fit into Contour Connect Panel
701 Specifications:
•Continuous Rating: 200 Amps DC
•Intermittent Rating: 300 Amps DC
•Cranking Rating: 1000 Amps DC
•Voltage Rating: 48 Volts DC
•Operation: 1-2-Both-Off
•Mounting: Recessed or Surface
•Ignition protected
•Termination Stud Size:
3 x 5/16"
•Dimensions: 69 x 69 x 75h mm
(2.75 x 2.75 x 3h inches)
•Tin plated copper studs and nuts -
BEP 702 Distribution Stud
Product Code: 702
The Contour Distribution Stud allows terminating of heavy duty cables for one or more connections.
Contour lock mouldings with removable side plates allow for connections from all sides.
Stud size: 10 mm (3/8 in); 69 x 69 x 50 mm (2.75 x 2.75 x 2 in} -
BEP 702 Distribution Stud – 2 Terminals (8mm and 10mm)
Product Code: 702-8-10
The Contour Distribution Stud allows terminating of heavy duty cables for one or more connections.
Contour lock mouldings with removable side plates allow for connections from all sides. -
BEP 702 Distribution Stud – 2 x 10mm Studs
Product Code: 702-2S
The Contour Distribution Stud allows terminating of heavy duty cables for one or more connections.
Contour lock mouldings with removable side plates allow for connections from all sides. -
BEP 702 Distribution Stud – 8mm
Product Code: 702-8-B
BEP 702 Distribution Stud
-
BEP 707 Circuit Breaker Module
Product Code: 707
BEP 707 Circuit Breaker Module offers provision for three circuit breakers ideal for medium duty loads, like waste treatment systems and electric toilets.
-
BEP 720 Heavy Duty On/Off Battery Switch
Product Code: 720
The 720 Heavy Duty Battery Switch follows the successful release of the 701 switch in 1999. It fits into the same contour lock system as used on the battery distribution system.
-
BEP 720 Remote Operated Motorised Battery Switch with Optica
Product Code: 720-MDO
The 720-MDO is a high current (500A), remotely activated battery switch.
Remote operation allows the battery switch positioned where cable runs can be minimized. Reduced cable runs allow smaller section cable to be used, resulting in significant reductions in cable cost, plus weight savingsThe 720-MDO Version 8 has new installation options, whereby the motor/circuit board can be fed from an independent 12V or 24V supply. -
BEP 720 Remote Operated Motorised Emergency Parallel Switch
Product Code: 720-MDO-EP
The 720-MDO-EP (Emergency Parallel Switch) provides remotely activated, high current, emergency parallel connection of two battery banks for a 10 minute period following activation of the remote switch.
-
BEP 721 Heavy Duty Battery Selector Switch
Product Code: 721
The BEP 721 Battery Selector Switch is a heavy duty selector switch. Housed in the same module as the 720, it includes the same removable plates and back cover. While BEP Marine recommends isolated battery systems as outlined with our distribution clusters, the 721 offers a simple economical way of separating two batteries.
