Black insert for (imperial) stainless steel tube, 2".
Fits 2" (50.8mm) outside diameter tube, max. wall thickness 1.5mm (minimum I.D. 1.7/8" [47.7mm]).
-
Cap for rod holder 2″ Black
Product Code: RC10
-
Adjustable Spray Aerator Head
Product Code: 4125
Attwood Adjustable Spray Aerator Head
-
Black Rod Holder – Wide Head with Cap
Product Code: 4409B
Wide head Nylon Rod Holder complete with weathertight Cap
Head: 107mm x 85mm,
Length: 232mm, ID:42mm
Made in Italy
Colour
Black 4409B
-
Square Eye Plate 316SS 10mm (K127)
Product Code: K127
Square Eye Plate 316SS 10mm (K127) -
Stainless Steel Strainer Livewell 3/4″ thread
Product Code: NS19
The perfect product to prolong the life of your livewell pump. This strainer simply screws onto the bottom of the inlet and stops any unwated debris entering into the pump and/or the livebait tank.
-
Rubber Latch 75mm(193350)
Product Code: 193350
Rubber Latch 75mm(193350) -
Mooring buoy / Cray Buoy – Large
Product Code: 16388
10” Large Marker Buoy with a total length of 39 cm
Twin handles at the top and an attackent eye at the base under the waterline.
- Can be used as anchor buoy, mooring buoy, marker buoy
- UV resistant
- Durable polyurethane hard plastic
- Useful for fishing nets, set lines and a marker float for cray pots
Orange marker buoy
Marker floatDimensions:
Diameter: 250 mm
Length (oa): 390mm -
Fish Bin 70 Litre Black
Product Code: 575.02
Fish Bin
Specifiactions
70L Fish Bin: 670mm L x 450mm W x 330mm H (P/N 575.02)
Please note that this is just the Base and does not come with the Lid.
-
maXtek Cooler Chocks – Set of 4
Product Code: 70207-BP
Stop your cooler or fish bins from sliding around the boat. These chocks alllow you to tie down your bin and secure firmly. Plastic Cooler Chocks that can be fixed to your boat to prevent your Chilly bin or Ice Box moving around.
-
Rod holder – Side or Deck mount
Product Code: 54079-2BK
The RodKing Rod Holder is a multi-fit removeable rod holder. It is fully adjustable and can be mounted vertically or deck mounted on a flat surface.
203mm long and has a generous 47mm opening. -
Floating Fold-up Safety Knife
Product Code: 11053
Folding knife that Floats
-
Premium SS Oval Flush-Mount Rod Holder – 30°
Product Code: 4422
Polished Oval Rod Holder
Our premium flush mount rod holder is robustly manufactured from 316 grade stainless steel for corrosion resistance and durability. The head of the holder is cast in one piece.
* 316 stainless - polished finish
* Robust construction - Cast head
* Black PVC Liner
241 (l) x x I.D. 42mm x 30°Available in a Blister Pack
-
SALE!
1200mm Gaff
Product Code: GG1200
Gaff - When you need an extra hand to pull those big fish onboard
1200mm alloy handle with stainless needle point hook
Part Code: GG1200
-
Mount for Pot Hauler
Product Code: POTHMNT
Mount for MTK9000 MaXtek Electric Pot Hauler.
Mount only.
Click here for the Maxtek Pot Hauler. -
3 Rod Holder and Storage Rack
Product Code: SW13403
3 Rod Storage Rack
* Has a handy place to store your pliers and fillet knives
* Made of white polypropylene that resists chips and cracks and can be cleaned up with soap and water
* UV Stabilizers make these rod -
4 Rod – Rod Rack
Product Code: 54034
Rod Rack manufactured from UV Stablized PE.
Comes complete with mounting hardware and two mounting feet per rack assembly. Mounts can be located along the length of the rack. -
SkipperMate Knife
Product Code: 11476
Stainless Steel Multifunction Sailors / Fisherman Tool
-
Stainless Rod Holder – Removable
Product Code: 54073
Stainless Steel Rod Holder Made from stainless steel, this rod holder comes with a slimline gunwhale bracket. Bracket allows the user to easily remove the rod holder when not in use for convenient stowage. Perfect for installing the rod holder in areas of high traffic where removal is prefferred.
-
800GPH Seaflo Livewell Aerating Pump – Vertical
Product Code: NS800
Seaflo 800GPH Livewell Aerating Pump - Vertical
-
Rod Holder 316SS Removable
Product Code: 4423
Stainless Rod Holder
-
Bait Board with Rod Holder Mount 450 x 370mm
Product Code: 70200
Our most popular Bait Board.
Comes complete with alloy mount. Fits into any standard deck rod holder. -
12V. Ocean Tech CARTRIDGE PUMP 750 GPH LIVEWELL
Product Code: NS880
These marine aerator water-cooled housing live bait pumps are easy to install and the cartridge feature allows for easy access to the impeller that makes it easy to maintain and clean.
-
Delux Bait Board Mount ONLY (BB09M)
Product Code: BB09M
Delux Bait Board
-
Rod Holder – Tournament 32mm Rail Mount
Product Code: 54089
Tournament Series Stainless Steel Rod Holder for Larger Rails
Highly polished Stainless steel rod holder designed to easily clamp-on to boat rails. Clamps on to rails and angle can be adjusted 180 degrees vertically to suit your set up. -
750 GPH Dual Outlet – Ocean Tech Vertical Aerator Pump
Product Code: NS800-D
These marine aerator water-cooled housing bilge pumps are easy to install and the cartridge feature allows for easy access to the impeller that makes it easy to maintain and clean.
-
Rail Mounted Bait Board
Product Code: 70201
Rail Mounted Bait Board
Complete with adjustable rail mount.
Dimensions:
Width: 510mm
Depth: 350mm
Height above rail when mounted: 90mm -
Cup Holder SS Rod Holder Combination
Product Code: 54090
Flush Mount Polished Stainless Angled Rod Holder
Dual purpose rod / drink holder with upper section designed to secure cans and bottles.
Robustly manufactured from 316 grade stainless steel for corrosion resistance and durability.* 316 stainless - polished finish
* Robust construction - Cast in one piece
* White PVC Liner
* Drain Hole
* Securing base
* 30º Angle
Dimensions:
Requires 250mm of depth
Cup outside mounting diameter: 115mm
Cup internal dia: 87mm
Length (oa): 260mm
Rod tube angle: 30° -
12V. Ocean Tech CARTRIDGE PUMP 1100 GPH. LIVEWELL
Product Code: NS1110
These marine aerator water-cooled housing live bait pumps are easy to install and the cartridge feature allows for easy access to the impeller that makes it easy to maintain and clean.
-
NZ Anglers Mate Longline Kit
Product Code: NZAMLONGL
NZ Anglers Mate Longline Kit
Kit contains:
2 x floats
2 x 5mm grapnel anchors
1 x 10” hand caster backbone with 2 x stainless steel shark clips
1 x 25 trace set with snap swivels
Includes handy storage basket -
Premium Large Portable Smoker
Product Code: SMOKER
Smoke gourmet food:
- High grade stainless steel
- Easy Fuel, light, operation, place lid sit back and enjoy
- Variable air flow
- Removable trays
- Comes withFuel Trays
- Uses standard wood chips
2 grab handles
Dimensions: 550W x 450D x 200H -
Medium Bait Board 560(l) x 380(w)
Product Code: BB01
Small Plain Bait Board made in New Zealand
- Solid non flex construction
- Bait Board made from UV stabilised polymer
- Universally used in stainless steel bait stations
Dimensions (mm): 560 (L) x 380 (W) x 50 (D)Options available (sold separately)
Rod holder mount
Transom mounting kit -
High Sided Bait Board – 600(l) x 400(w)
Product Code: BB12
High Sided Bait Board
-
RULE 800GPH Livewell Aerating Pump – Vertical
Product Code: NS800R
RULE 800 GPH LIVEWELL / BAITWELL PUMP -TOURNAMENT SERIES
Tournament Series Aerator Pump Quick, one hand "push button" motor cartridge removal system Easy grip rubber overmold 360° Rotatable base allows you to position the inlet at any angle 360° Rotatable glass filled nylon barbs Dual port option allows for connection of washdown pump Long lasting and powerful Rule motors Anti-airlock protection 12VDC
-
Delux Bait Board ONLY (BB08)
Product Code: BB08
Delux Bait Board
Complete with drain hole and gutter around cutting surface.
SEE OPTIONS BELOW
Dimensions:
720L – 440W – 50D -
Rule 1100GPH Livewell Aerating Pump – Vertical
Product Code: NS1100R
Tournament Series Livewell/Baitwell Pumps are Powerful and long lasting, Tournament Series Cartridge Pumps offer outstanding performance as well as the versatility of replacing the motor cartridge if the motor expires.
-
Large Bait Board – 850(l) x 450(w)
Product Code: BB04
Large Bait Board
-
Bait Board Transom Mount
Product Code: BB07
Twin Mount with transom fittings.
Works on the Trailer boat engine-well surround where space is limited,
or any Transom where a low profile fittings are required, Fits a range of Bait boards
-
Flying Gaff – SS head, 1600mm handle
Product Code: GG1600FLY
Flying Gaff - SS head, to fit 1600mm handle.
Nacsan flying gaff, New Zealand made. 3 sizes in heads - all heads will fit Nacsan flying gaff handle ( Med Head Shown)
Medium head. 12mm 304 S/S complete with 6mtr rope
Large head. 16mm 304 S/S complete with 6mtr rope
Ex Large head. 19mm 304 S/S complete with 6mtr rope
Flying gaff Handle. 1600mm handle with nylon insert
-
Delux Bait Board WITH Mount (BB09)
Product Code: BB09
Delux Bait Board
-
Dometic 43 Litre Cooler Box
Product Code: 2002
43l Cooler Box / Chilly Bin / Icebox / Esky