-
Bronze Tailpiece 1″ x 1 1/4″ (41533)
Product Code: 41533
Bronze Tailpiece 1" x 1 1/4" (41533) -
Rubber Exhaust Cover – 3″
Product Code: 42511
Rubber Exhaust Cover / flap
Internal is 3 inch or 77mm, external 3-3/4 or 93mm, 1 ½ inch or 38mm deep
Designed and rebated to take a pipe clamp.
Actual measurements show that the rubber would fit on a pipe with a external diameter of 75mm and should stretch tightly onto a 80mm (OD) pipe.
-
Female Bend 15mm
Product Code: 6493
Hansen 'Easy Fit' polythene (alkathene or LD) fittings are suitable for use above or below gound in varying operating pressures and temperatures. Designed for NZ Low Density Polythene Pipe (LDPE), Enduroflex, Australian Rural (Class B) and Irish Imperial pipe. Also suitable for other types of flexible pipe and hose, ie thin wall irrigation tubing and rubber hoses.
-
LED Bulb – (BA15D) 12-24V DC
Product Code: 72185
Multi-voltage All Round LED replacement bulb
Dual contacts on base
Parallel securing pinsAll round bulb – 360°
As a replacement or for retrofitting to LED
Dimensions:
Height: 48mm (oa)
Diameter: 15mm -
Skin Fitting 1 1/4″ White (90421)
Product Code: 90421
Skin Fitting 1 1/4" White (90421) -
Load Bearing Collar medium (90857)
Product Code: 90857
Load Bearing Collar medium (90857) -
Shaft Anode – Streamline – 1 1/8″ CMX-4 Aluminium (ANOX04AL)
Product Code: ANOX04AL
Shaft Anode - Streamline - 1 1/8" CMX-4 Aluminium (ANOX04AL) -
Swivel Eye Snap (K053)
Product Code: K053
Swivel Eye Snap (K053) -
LED Bulb – MR-16 Warm White – 380lm
Product Code: LED-MR16
LED Bulb - MR16 10SMD Marine longlife LED with built in voltage regulator to prolong life. Resistant to fluctuations in voltage fluctuations common on boats and motorhomes. What is a LED?
-
Outboard Flag with LED light
Product Code: OFL
Outboard Flag with LED light
-
S/S Bracket for Pacific P6782 Aerial
Product Code: P1082
S/S Bracket for Pacific P6782 Aerial
-
Tow Bar Shin Protector
Product Code: TC541106
Made of soft rubber, the shin protector fits over the towbar.
-
Water Hose 25mm
Product Code: WATER25
Water Hose 25mm -
Plug Male 16A 220-240V
Product Code: 90394
Cord Extension Male Plug, 16A, 230V, 3-Round Pin
-
Shaft Anode – Streamline – 1¼” CMX-5 Aluminium (ANOX05AL)
Product Code: ANOX05AL
Shaft Anode - Streamline - 1¼" CMX-5 Aluminium (ANOX05AL) -
Hose Tail 2″ BSP Long Thread 90 degree (90570)
Product Code: 90570
Hose Tail 2" BSP Long Thread 90 degree (90570) -
Reducing bush 65×50 (6442)
Product Code: 6442
Reducing bush 65x50 (6442) -
Skin Fitting 50mm Black (6709B)
Product Code: 6709B
Skin Fitting 50mm Black (6709B) -
Pencil Anode Small – 3/8 NPT Brass Plug
Product Code: ANOE1F
Engine Cooling System Pencil anode complete with 3/8” NPT brass plug.
Dimensions:
L: 1-1/4" (32 mm) x W: 1/2" (12.7 mm) (OD)
We carry a selection of pencil anodes from Martyr Anodes.
-
BEP Bus Bar – 6 Way
Product Code: BB-6W
BEP Bus Bar - 6 Way
Dimensions:
117 x 15 x 29 mmFeatures:
* 6 x 4mm (5/32") stainless steel screws with shake proof washers.
* 2 x 6mm (1/4") input studs
* 100A current rated
* Tin plated Brass
* Insulated mounting base with recessed mounting holes avoids accidential shorting on aluminum backing plates.
Specifications:
* Voltage Rating: 300 Volts AC Max & 48 Volts DC Max
* Bus material: Tin plated brass
* Stud material: Tin plated brass
* Screw Material: Stainless Steel
* Base material: Flame retardant plastic -
Emerkit – Corkit – Aqua
Product Code: CORKIT
Emerkit Corkit is a two-part epoxy compound in a 114g single stick form that will cure hard in minutes.
Corkit will adhere to a wide range of surfaces often eliminating expensive repairs. -
Emerkit – Corkit – Steel
Product Code: CORKIT STEEL
Emerkit Corkit is a two-part epoxy compound in a 114g single stick form that will cure hard in minutes.
Corkit will adhere to a wide range of surfaces often eliminatin expensive repairs. -
Fuel Hose 12.7 mm
Product Code: FUEL12
Marine Fuel Hose - Fuel Hose 12.7 mm ( 1/2” )
-
Lid for Boaties Frypan
Product Code: FC11
Stainless Steel lid for your Boaties Square Frying Pan
-
Gullsweep Hub Replacement
Product Code: GULL-3
Gullsweep Hub Replacement
-
Kill Switch Lanyard (10284)
Product Code: 10284
Kill Switch Lanyard (10284) -
Kill Switch Lanyard Blister Pack (10284-BP)
Product Code: 10284-BP
Kill Switch Lanyard Blister Pack (10284-BP) -
Maxwell Half Inch Sight Glass for gearbox
Product Code: 3223
Maxwell Half Inch Sight Glass for gearbox -
Black (43001-BK)
Product Code: 43001-BK
Black (43001-BK) -
White (43001-WH)
Product Code: 43001-WH
White (43001-WH) -
6″ White Inspection Port
Product Code: 4356
6" White Inspection Port
Size refers to hole diameter -
6″ Inspection port – Black with Clear
Product Code: 4359C
6" Inspection port - Black surround with Clear Inspection Plate Size refers to hole diameter Deck Plate, screw in-out design (no tools required to open).
-
200ml (50994)
Product Code: 50994
West System 205 Fast Hardener
Available in 200ml, 800ml and 2 litres -
200ml (50997)
Product Code: 50997
West System 206 Slow Hardener
Available in 200ml, 800ml and 2 litres. -
Tarp Clamp – Pair
Product Code: 70206-BP
Rugged composite clip with heavy-duty spring and bungee cord
Ingenious design grips tarps and sheeting tight without the need to locate rope eyes
The tighter the clip is pulled the tighter it grips
Simple to release
Suitable for use on boats, trucks, trailers, farm and garden.Blister Pack.
-
Hatch Fastener 316SS – 26 x 79mm
Product Code: 70611
Hatch Fastener 316 Stainless Steel
Length can be adjusted via threaded stem: 79mm to 95mm
26mm wideSecurity eye for padlock in base.
-
Vented Loop 19mm Black (90318)
Product Code: 90318
Vented Loop 19mm Black (90318) -
Vented Loop 19mm White (90319)
Product Code: 90319
Vented Loop 19mm White (90319) -
Skin Fitting 1 1/2″ White (90419)
Product Code: 90419
Skin Fitting 1 1/2" White (90419) -
Motor Flusher with Rectangular Cups
Product Code: 98748
Rectangular Cupped Universal motor flusher allows the cooling systems to be flushed out using a garden hose.
Works on most outboards.
