GRUNT Emergel 500ml
-
GRUNT Emergel 500ml
Product Code: CLEMERG
-
Grunt SUPAWAX – Polish 500ml
Product Code: CLWAX
Grunt SUPAWAX - Polish
-
Speich blade 330mm (4568)
Product Code: 4568
Speich blade 330mm (4568) -
Gullsweep Vane Set Replacement
Product Code: GULL-8
Replacement wind vanes for Gullsweep.
-
Glass Chimneys for Lamp
Product Code: P91502-05
Glass Chimneys for 91502 Lamp
Chimney Measurements
34mm OD at top
62mm OD at middle
37mm ID at base
112mm high -
Swivel Jaw-Jaw SS316 10mm (K007)
Product Code: K007
Swivel Jaw-Jaw SS316 10mm (K007) -
32mm Mame Swivel Block (K283)
Product Code: K283
32mm Mame Swivel Block (K283) -
VHF Radio Extension Speaker
Product Code: 7362
VHF Radio Auxiliary External Speaker for marine communications
Great for adding an external speaker to your VHF.
Specifications and Features:
- 8 ohm / 4 watt
- Colour: White
- Dust and Water resistant
- Mylar cone
- Small size: 80x70x45mm
- Fits Anywhere
- Mounting bracket included
- 1.5m cable
- 3.5mm plug
-
Bleeding Kit for Maxtek Hydraulic Steering
Product Code: ST-OAK
Bleeding kit for Maxtek Hydraulic steering.
-
Speich blade 400mm (4564)
Product Code: 4564
Speich blade 400mm (4564) -
Ignition Switch with Cap – Deeper Panels
Product Code: 10276
Ignition starter switch supplied with 2 keys and slotted rubber cap
Rubber cap designed to provide an effective seal to prevent water entering the switch.
The switch can be mounted/adjusted to fit panel /bulkhead depth up to 30mm thick.5 Terminals
OFF - ON - START
Max panel thickness 30mm
Cut-out hole - 18mm diameter -
Hull Anode ‘M’ Plate – Small Hull w/Wire – Aluminium
Product Code: ANOPMWA
Hull Anode 'M' Plate - Small Hull w/Wire - Aluminium
Dimensions: 114mm x 64mm x 17mm
Weight: 0.35Martyr Cadnium free anodes
-
Waterproof Deck Connector 2 pin (3221)
Product Code: 3221
Waterproof Deck Connector 2 pin (3221) -
Speich blade 450mm (4565)
Product Code: 4565
Speich blade 450mm (4565) -
Door latch – Push-in
Product Code: 50095-CP
Flush Door Latch with Push Lock
-
Rod holder – Side or Deck mount
Product Code: 54079-2BK
The RodKing Rod Holder is a multi-fit removeable rod holder. It is fully adjustable and can be mounted vertically or deck mounted on a flat surface.
203mm long and has a generous 47mm opening. -
Black Cone 33cm – Day Sign
Product Code: 9319
Black Cone 33cm - Day Sign
-
Hull Anode M30 – Medium Streamline – Aluminium
Product Code: ANOMM30A
Hull Anode M30 - Medium Streamline Bolt-on - Aluminium
- For use in salt water
- Alloy is manufactured to exceed or meet US Military Specification MIL-DTL 18001L
- Tried and tested genuine zinc product
- Manufactured by the same manufacturer as the genuine OEM
Dimensions:
D – 121
D1 – 118
D2 – 40
ID – 6Weight: 0.34kg
Martyr Part: CMM30AMartyr Cadmium free aluminium anodes
* Better for the environment
* Last longer
* 1/2 the weight of zinc
* 3.5 times more energy and protective power than zinc -
Bow Roller – 50mm diameter
Product Code: N07
Multi purpose bow or deck roller
316 Stainless Steel
Frame:
72mm (h)x 60mm (w) x 33mm (d)
Nylon Roller:
50mm (diameter)
48mm (wide) -
Paddle wheel for Thru hull Speed tdx – advanSea
Product Code: PL17408
Paddle wheel for through hull Speed tdx - advanSea
Works with AdvanSea 40640 thru-hull transducer
-
U Bolt 316 SS 10mm x 130mm (K240)
Product Code: K240
U Bolt 316 SS 10mm x 130mm (K240) -
Ignition Starter Switch
Product Code: 10274
Ignition Starter Switch
ACC-OFF-IGN-START
7 terminalsIncludes choke or glow plug function
Max panel thickness 14mm
Cut-out hole - 18mm diameterRated:
Ignition 15 Amp @ 12v DV
Solenoid 30 Amp @ 12v DV
Accessory 15 Amp @ 12v DV
Choke 7 Amp @ 12v DV -
Floating Fold-up Safety Knife
Product Code: 11053
Folding knife that Floats
-
Bilge Pump Float switch, DC 12V/24V
Product Code: 91549
Nuova Rade Float switch, DC 12V/24V, 15Α max(at 12 volt) This float switch is designed to automatically control the on – off cycle of bilge pumps. Designed with a reliable rolling-ball and switch system that prevents rapid on/off cycling found on some switches and is safer than mercury switches. When water lifts the chamber buoy up to 6 cm, the switch automatically turns the bilge pump on until the water is dry.
-
Yamaha replacement trim tab skeg anode for 150, 175 & 200HP
Product Code: ANO6K14537100A
Martyr - Yamaha Aluminium Trim Tab Anode
CM6K14537100A 92 x 76mm
Yamaha replacement trim tab skeg anode for 150, 175 & 200HP
Replaces 6K1-45371-00
-
BEP Bus Bar 24 Way
Product Code: BB-24W-2S
Features
•4mm (5/32") stainless steel screws with shake proof washers.
•2 x 6mm (1/4") input studs
•Tin plated Brass
•Insulated mounting base with recessed mounting holes avoids accidential shorting on aluminum backing plates.
Specifications:
•Voltage Rating: 300 Volts AC Max & 48 Volts DC Max
•Bus material: Tin plated brass
•Stud material: Tin plated brass•Screw Material: Stainless Steel
-
Hella DuraLed Cab Marker/Supplementary Side Indicator
Product Code: H2026
Hella DuraLed Cab Marker / Supplementary Side Indicator
-
25mm Mame Swivel Block (Nylon Single Sheave) SS 316 (K289)
Product Code: K289
25mm Mame Swivel Block (Nylon Single Sheave) SS 316 (K289) -
Hydraulic Steering Bulkhead Strain Relief Hose Kit
Product Code: STBULK
Prevents Kinks and Chaffing in Hydraulic Steering Hose
-
Rigging Hose Flange 2 (50mm)
Product Code: STFLANG2
Rigging Hose Flange 2 (50mm)
-
Masthead light <12m Black Body LED Blister (00131-LD-BP)
Product Code: 00131-LD-BP
Masthead light <12m Black Body LED Blister (00131-LD-BP) -
Masthead light <12m Black Body LED (00131-LD)
Product Code: 00131-LD
Masthead light <12m Black Body LED (00131-LD) -
Masthead light <12m White Body LED (00131-WLD)
Product Code: 00131-WLD
Masthead light <12m White Body LED (00131-WLD) -
LED Stern Light (White Body) for Vessels <12M
Product Code: 00141-WLD
LED Stern Light for Vessels <12M
12 Volt , 0.5 watt
135 degree viewing angleThis navigation light has 9 x 5mm Cool White LED bulbs inside the casing for reliability and low power consumption.
Dimensions: 75mm(height) x 65mm(width) x 56mm (depth)
CE, RoHS and international rules approved.
-
1.0M Engine Control Cable
Product Code: 60081.1C
High Performance Engine Control Cables providing all the best features:
• Patent pending splined core for superior response and feel, especially in the toughest shift cable routing.
• Black HDPE outer casing for environmental durability
• Steel armour casing
• Teflon inner core to ensure extremely low friction
• High tension strength with small bending radius
• Exceeds all industry boat standards
• State-of-the-art manufacturing cell assures total consistency
• Manufactured and certified to ISO 9001 / 2000Length: 1m
Quantity: Single
Suitable for:
Standard inboard engine controls that accept type 33c
YAMAHA, HONDA, SUZUKI Outboards
Compatable with Telefex No. CC332
-
1.25M Engine Control Cable
Product Code: 60081.25
High Performance Engine Control Cables providing all the best features:
• Patent pending splined core for superior response and feel, especially in the toughest shift cable routing.
• Black HDPE outer casing for environmental durability
• Steel armour casing
• Teflon inner core to ensure extremely low friction
• High tension strength with small bending radius
• Exceeds all industry boat standards
• State-of-the-art manufacturing cell assures total consistency
• Manufactured and certified to ISO 9001 / 2000Length: 1.25
Quantity: Single
Suitable for:
Standard inboard engine controls that accept type 33c
YAMAHA, HONDA, SUZUKI Outboards
Compatable with Telefex No. CC332
