Outboard flush kit dual flush
-
Outboard flush kit dual flush
Product Code: SW17504
-
3 Rod Holder and Storage Rack
Product Code: SW13403
Keep your favorite fishing combos neat, secure, and ready for action with the 3 Rod Holder and Storage Rack, a clean and practical organizer built for busy boat decks.
-
Triple-rod capacity keeps three fully rigged rods held upright and out from underfoot while you are on the move
-
Integrated storage slots give you a handy, dedicated spot to stow your pliers, rig cutters, and fillet knives right where you need them
-
Tough polypropylene construction stands up to heavy saltwater spray and cleans up easily with simple soap and water
-
Formulated with heavy-duty UV stabilizers to resist cracking, fading, and brittleness under the harsh Kiwi sun
-
-
Premium First Aid Kit
Product Code: SW005
The green Quell Premium First Aid kit features zip shut sealed internal plastic pockets to allow instantaneous viewing of all contents in the event of emergency.
-
First Aid Kit
Product Code: SW002
The red Outdoor First Aid kit unfolds into three with clear view sealable compartments for the contents to be individually located.
-
MaXtek Hydraulic Steering Tee 3/8″
Product Code: STTEE3/8
For connecting with the 3/8” Maxtek Marine re-usable couplings Used in twin engine, liquid tie bar or power steering systems. -
Maxtek Hydraulic Steering Tiebar for ST150 and ST350 (STTBK8
Product Code: STTBK800S
Maxtek Hydraulic Steering Tiebar for ST150 and ST350 (STTBK8 -
Maxtek Hydraulic Steering Tiebar for ST700 (STTBK3822)
Product Code: STTBK3822
Maxtek Hydraulic Steering Tiebar for ST700 (STTBK3822) -
Maxtek Marine Recessed Helm Wedge
Product Code: STSH200
Maxtek Marine Recessed Helm,
- Solid Black Aluminium
- Fits all Helms in the Maxtek Marine range
- Comes with mounting hardware
- 20 Degree angle
- Allows increased space for the captain
Helm not included for illustration purposes only.
-
Lowrance StructureScan HD
Product Code: STRUCTURESCANSKIM
Sonar Imaging System
-
MaXtek Marine Straight S/S Adapter
Product Code: STRDB38
Seastar 3/8” connection to Maxtek Marine 3/8” coupling
Can be used for Auto Pilot systems to connect to Maxtek Marine 3/8” hose couplings
-
15m Hydraulic Hose 350hp (STNSH06-15)
Product Code: STNSH06-15
15m Hydraulic Hose 350hp (STNSH06-15) -
Maxtek Marine Hydraulic 44cc Helm only
Product Code: STNSH044
Maxtek Marine Hydraulic 44cc Helm only -
Maxtek Marine Hydraulic 37cc Helm only
Product Code: STNSH037
Maxtek Marine Hydraulic 37cc Helm only -
Maxtek Marine Hydraulic Steering 30cc Helm
Product Code: STNSH030
The Maxtek Marine 30cc helm was designed with help from commercial fishermen who demanded the highest quality materials along with providing the ultimate in longevity and smooth operation.
For both Commercial and Recreational users
- Front Mount 30cc Heavy Duty Helm Pump
- 1000psi rated
- Built in Lock Valve
- Stainless Steel Shaft
- 3 x Seals for maximum longevity
- Connecting ports for Dual Station / Autopilot
Installed by leading NZ boatbuilders including, Lazercraft Boats, Buccaneer, Southern Boats, Huntsman Boats , Smuggler, KiwiKraft, Raeline, Pinnacle Boats, Ultimate Boats, DNA boats, Highfield boats, Osprey Boats, Nuline boats, King Water craft, Machina Supply Co. and many commercial operators.
-
Maxtek Marine Hydraulic Steering 25cc Helm
Product Code: STNSH025
The Maxtek Marine 25cc helm was designed with help from commercial fishermen who demanded the highest quality materials along with providing the ultimate in longevity and smooth operation.
For both Commercial and Recreational users
- Front Mount 25cc Heavy Duty Helm Pump
- 1000psi rated
- Built in Lock Valve
- Stainless Steel Shaft
- 3 x Seals for maximum longevity
- Connecting ports for Dual Station / Autopilot
Installed by leading NZ boatbuilders including, Lazercraft Boats, Buccaneer, Southern Boats, Huntsman Boats , Smuggler, KiwiKraft, Raeline, Pinnacle Boats, Ultimate Boats, DNA boats, Highfield boats, Osprey Boats, Nuline boats, King Water craft, Machina Supply Co. and many commercial operators.
-
Maxtek Marine Hydraulic Steering 18cc Helm
Product Code: STNSH018
The Maxtek Marine 18cc helm was designed with help from commercial fishermen who demanded the highest quality materials along with providing the ultimate in longevity and smooth operation.
For both Commercial and Recreational users
- Front Mount 18cc Heavy Duty Helm Pump
- Built in Lock Valve
- 3 x Seals for maximum longevity
- Connecting ports for Dual Station / Autopilot
Installed by leading NZ boatbuilders including, Lazercraft Boats, Buccaneer, Southern Boats, Huntsman Boats , Smuggler, KiwiKraft, Raeline, Pinnacle Boats, Ultimate Boats, DNA boats, Highfield boats, Osprey Boats, Nuline boats, King Water craft, Machina Supply Co. and many commercial operators.
-
15m Hydraulic Hose 150hp (STNH04-SS-14)
Product Code: STNH04-SS-14
15m Hydraulic Hose 150hp (STNH04-SS-14) -
Maxtek Marine Inboard Heavy Duty hydraulic system
Product Code: STMI96N
Maxtek Marine Hydraulic steering system to suit inboard engines with Rudder.
-
MaXtek Hydraulic Steering Liquid Tie Bar
Product Code: STLTB-38
Maxtek Marine Liquid Tie-Bar
Used for Twin Engine systems where a mechanical tiebar cannot be used.
3/8” fittings to suit the ST-350 cylinder
The Maxtek Marine liquid tiebar is used to allign engines on opposite sides of the craft, such as a cat.
Buccaneer, CSB Huntsman, Senator, Smuggler, Southern Boats, Lazercraft boats, Bluefin, KiwiKraft, Raeline, Pinnacle Boats, Ultimate Boats, DNA boats, Highfield boats, Osprey Boats.
-
maXtek marine Straight fitting 3/8″
Product Code: STHSO14NS
maXtek marine straight adapater to suit the ST350 system.
-
Rigging Hose Flange 2″ (50mm) w Fuel Line Port
Product Code: STHPORT
Bulkhead Rigging Hose Flange with auxilary fuel line port
-
Rigging Hose 2.0 (50mm) 50FT Roll
Product Code: STHOSE2INCHROLL
Rigging Hose Internal measurement 2 Inch or 50 mm
-
Rigging Hose 2.0 (50mm) Per FT
Product Code: STHOSE2INCH
Rigging Hose Internal measurement 2 Inch or 50 mm
-
MaXtek Hydraulic Steering Elbow S/S for 3/8″ hose
Product Code: STHLO14NOS
maXtek cylinder or helm ( 1/4" ) --> MaXtek Hose ( 3/8" )
-
MaXtek Hydraulic Steering Elbow S/S for 1/4″ hose
Product Code: STHLO14H0S
maXtek cylinder or helm ( 1/4" ) --> MaXtek Hose ( 1/4" )
-
MaXtek Hydraulic Steering Elbow S/S Adapter seastar
Product Code: STHLO14B0S
maXtek cylinder/helm (1/4") -->Seastar/Uflex hose (5/16")
-
Flex Sleeving Per Roll (50ft)
Product Code: STFLEX ROLL
FLEX is a lightweight, braided jacketing for bundling and protecting wires, cables and hoses.
-
Flex Sleeving Per FT
Product Code: STFLEX
FLEX is a lightweight, braided jacketing for bundling and protecting wires, cables and hoses.
-
Rigging Hose Flange 2 (50mm)
Product Code: STFLANG2
Moulded polypropylene flange is internally threaded to retain hose and to make rigging adjustment simple.
-
MaXtek reusable hose coupling for 1/4″ Hose – Pairs
Product Code: STCOU1/4
maXtek Marine Hydraulic Outboard Steering
Reusable Couplings to fit 1/4” hose
Single outboard engine application up to 150HP
Contents of kit:- Two couplings
-
MaXtek Marine Hydraulic Steering Helm Oil Cap ( Vented )
Product Code: STCAP-1
MaXtek Marine Hydraulic Steering Helm Oil Cap ( Vented ) -
Steering Plate for Yamaha f30hp up to f70hp
Product Code: STC3520815
A commerical grade adapter ( R4 ) to connect our ST150H-18 or ST350H-25 systems to a F30 - F70 Yamaha outboard.
Also use this to suit Yamaha 90hp 2stroke.
-
MaXtek Hydraulic steering Seal kit for 350hp cylinder
Product Code: STC3520802
MaXtek Hydraulic steering Seal kit for 350hp cylinder -
MaXtek Hydraulic steering Seal kit for 150hp cylinder Pair
Product Code: STC3016802
Genuine original replacement seals for the Maxtek ST3016-1 cylinder (150HP and under outboard engines). This pair of corrosion-resistant seals ensures leak-free hydraulic operation, perfectly complementing the cylinder's hard-chrome-plated stainless steel shaft and anodized aluminum body.
-
Maxtek Marine Seal kit for helm pumps
Product Code: STC1800804
Maxtek Marine Seal kit for helm pumps -
Hydraulic Steering Bulkhead Strain Relief Hose Kit
Product Code: STBULK
Prevents Kinks and Chaffing in Hydraulic Steering Hose
-
Hydraulic Steering Bulkhead Mounting Plate Twin Hose
Product Code: STB200
Looking for a tidy, watertight way to pass Hydraulic Steering hoses through a transom this is the way to do it.
-
STACK-A-PLATE
Product Code: STACKAPLATE
STACK-A-PLATE Stacks plates safely
-
maXtek Marine 700hp High Horsepower Complete Kit
Product Code: ST700H-25
maxtek Marine’s highest performance hydraulic steering system.
-
Maxtek 700hp Hydraulic Steering Cylinder for High Horsepower
Product Code: ST3822W
Maxtek Marine’s highest performance hydraulic steering cylinder. Designed specifically around commercial and multi engine applications requiring the ultimate in perfromance.