Straight Waste with 45mm plug with 40mm total depth
Dimensions:
Drain:
Drain Stainless Steel with overall 80mm width
32mm - Thread type
40mm - Total Drain depth
Drain Grate SS:
52mm - Overall Width
-
Waste Straight Vertical Outlet with 1 3/4″ (45mm) plug
Product Code: LP1600
-
Water Heater 42L front and rear mounts (411111)
Product Code: 411111
Water Heater 42L front and rear mounts (411111) -
Water Heater 42L side mounts (411101)
Product Code: 411101
Water Heater 42L side mounts (411101) -
Water Heater Element 110v (14121)
Product Code: 14121
Water Heater Element 110v (14121) -
Water Heater Element 240v (14122)
Product Code: 14122
Water Heater Element 240v (14122) -
Water Hose 12mm
Product Code: WATER12
Premium Heavy Duty Water Hose 12mm
-
Water Hose 16mm
Product Code: WATER16
Premium Heavy Duty Water Hose 16mm
-
Water Hose 20mm
Product Code: WATER20
Premium Heavy Duty Water Hose 20mm
-
Water Hose 25mm
Product Code: WATER25
Water Hose 25mm -
Water lock 40mm (WLOCKLR40)
Product Code: WLOCKLR40
Water lock 40mm (WLOCKLR40) -
Water lock 45mm (WLOCKLR45)
Product Code: WLOCKLR45
Water lock 45mm (WLOCKLR45) -
Water lock 50mm (WLOCKLR50)
Product Code: WLOCKLR50
Water lock 50mm (WLOCKLR50) -
Water Pressure Pump Kit 20 lpm 60psi – 12V with 1L Accumulat
Product Code: NS44KIT
A fully assembled pressure set that simplifies the installation of water pressure systems for both the professional and amateur installer. The set consists of a 3 chamber diaphragm pump, strainer and pre-pressurized accumulator tank with quick connect electrical connections on a Plate mounted board with 1/2" (13mm) outlets.
-
Waterproof Deck Connector 2 pin (3221)
Product Code: 3221
Waterproof Deck Connector 2 pin (3221) -
Waterproof Deck Connector 3 pin Large (3230)
Product Code: 3230
Waterproof Deck Connector 3 pin Large (3230) -
Waterproof Deck Connector 3 pin Small (3215)
Product Code: 3215
Waterproof Deck Connector 3 pin Small (3215) -
Waterproof Deck Connector 4 pin Large (3231)
Product Code: 3231
Waterproof Deck Connector 4 pin Large (3231) -
Waterproof Thermo Plastic Fuse Holder
Product Code: 11515A
Waterproof Thermo Plastic Fuse Holder -
Weaver Davit Heads
Product Code: RS110
Weaver Davit Heads
sold as a pair
-
Weaver Quick Kit For Snap Davit
Product Code: RBDKIT
Weaver Quick Kit For Snap Davit
Plates used for easy removal of davit heads from swim platform (used with RBD100 only)
Includes mounting hardware and quick-release pins With lanyard.
-
Weaver RBD-100 Dinghy Davits
Product Code: RBD100
Snap Davits for soft or hard bottomed Inflatable dinghies for vessels equipped with a stern platform. Suitable for both sail and power vessels with suitable transom.
-
Weaver Rubber Pad
Product Code: RP301
Weaver Rubber Pad
Rubber standoff pad (sold individually).
-
Weaver Stand Off Brackets 24″
Product Code: WEAVER-SO24
Weaver Stand Off Brackets
24" long Stainless Steel
Sold in pairs -
Weaver Stand Off Brackets 30″
Product Code: WEAVER-SO30
Weaver Stand Off Brackets
30" long Stainless Steel
Sold in pairs -
Weld-on or Bolt-on Hull Anode – 127mm
Product Code: ANOM35GA
Weld-on or bolt on hull anode.
-
Weld-on or Bolt-on Hull Anode – 152mm
Product Code: ACMHT1
Bolt-on or Weld-on Hull anode.
Bolt holes are pre-drilled into the strap
Aluminium strapDimensions:
Length of anode: 152 (L) x 76 (W) mm
Length between mounting holes: 197 mm (D)
14mm (W1) x 5mm (D1)
CMP anode part: CMHT1A
-
Wheel Clamp – Defender 165
Product Code: TC522101
The Trojan Defender Wheel Clamp is quick and simple to fit, has a zinc and powder-coated finish and is fitted with a high quality lock. It also includes a disc which helps to cover the wheel nuts adding a further deterrent from theft. It has been designed to fit most 13" to 15" wheels.
-
Wheel Clamp – Defender 195
Product Code: TC522102
The Trojan Defender Wheel Clamp is quick and simple to fit, has a zinc and powder-coated finish and is fitted with a high quality lock. It also includes a disc which helps to cover the wheel nuts adding a further deterrent from theft. It has been designed to fit most 13" to 15" wheels.
-
Whistle – Orange
Product Code: 70020
Lalizas Orange Safety Whistle
Used for attaching to LifeJackets and other Man Overboard safety equipment
ISO 12402-8 CE
-
White (43001-WH)
Product Code: 43001-WH
White (43001-WH) -
White Curved 4 Grid Louvered Ventilators (4387)
Product Code: 4387
White Curved 4 Grid Louvered Ventilators (4387) -
White Fender G Series 22cm x 68cm
Product Code: 7237-W
Durable and reliable, the G Series white fender provides excellent protection for your boat’s hull against docks, pilings, and other vessels. Built from tough marine-grade materials, it’s designed to withstand harsh conditions while maintaining long-lasting performance. A practical choice for everyday docking and mooring.
-
Wide Roller – 135mm
Product Code: NS1232S
Bow Roller Guide
Roller width: 135mm
Roller bracket width: 150mm
Overall width (including bolt and nut): ~190-195mminternal roller hole : 20mm
-
Wide Roller – 195mm
Product Code: NS1232
Roller guide - 208mm
Marine Grade 316 Stainless SteelLots of uses
- Ideal as a bow roller guide
- Cray pot guide
- Kontiki Drum roller
- Anchor Roller
- Trailer Roller
Dimensions:
Roller Width: 195mm
Bracket Width: 210mm
Width (oa): 250mm
Height (oa): 87mm -
Winch 1-1 no Rope (9121NR)
Product Code: 9121NR
Winch 1-1 no Rope (9121NR) -
Winch 1-1 with Rope (9121)
Product Code: 9121
Winch 1-1 with Rope (9121) -
Winch 3-1 no Rope (9123NR)
Product Code: 9123NR
Winch 3-1 no Rope (9123NR) -
Winch 3-1 with Rope (9123)
Product Code: 9123
Winch 3-1 with Rope (9123) -
Winch 3:1 Reduction with 4.5m Nylon Strap
Product Code: 63501-NB
Ideal trailer winch for small craft including dinghy's and jetskis. One way ratchet which can be disengaged for winding out.
Nylon strap offers the best solution to haul your boat on to your trailer by far.
- Easy on the hands
- Run through your hands when retrieving your boat; no wires to cut and dig into your flesh -
Winch Electric 2000
Product Code: 9240
Winch Electric 2000lbs
Remote Control Operated WinchSpecifications:
12V DC 0.8Kw/1.1hp253: 1 Gear reduction Ratio
7.6m cable at4.8mm dia
Mounting bolt pattern 123mm x 76mm
Line Pull speed 2 feet per Min, Current draw of 120amp based on max load of 2000lbs
Overall 308mm x 102mm x 158 high
-
Winch handle holder- round base (63572)
Product Code: 63572
Winch handle holder- round base (63572) -
Winch handle holder- square base (63573)
Product Code: 63573
Winch handle holder- square base (63573) -
Winch Strap
Product Code: 99094
Replaces older style winch wire rope The best method to haul your boat on to your trailer by far. Why? * The strap is easy on the hands ** Freely run it through your hands when retrieving your boat; no wires to cut and dig into your flesh Safety *** Does not rust **** Does not stretch like wire propelyene wires. Stretching wires and rope store energy and if they break, watch out! ***** Avoid injury Wires and rope stretch and when they fail they will cause serious injury.
-
Wind Indicator – Masthead Wind Vane
Product Code: 70092
Mechanical Directional Wind Indicator
- Plastic direction vane with aluminium stem tube
- Large fin-low inertia vane
- Sensitive to light wind
- Easy-to-read
- Fully adjustable tacking tab system
- Reflective strips on vane
Dimensions:
370mm (l) oa
314mm (stem height)
376 (h) oa -
Windward Wind Vane – Small
Product Code: AB002407
New Zealand Made Windicator, ideal for optimist Racer and small dingy sailing.
- Dinghy Racing Model
- Suitable for yachts 2-4 meters
- Mast top and foredeck mounting brackets supplied
- Supplied complete with reference arms
- 100% accurate in 2 knots of wind
- Weighs under 25 grams
- Vane arm Length 200mm
- Hard-wearing acetal bearing will ensure long life and very free movement of Vane arm
- Accurately balanced 100%
-
Wiper Hose 6mm Bulkhead 90°
Product Code: ZZ-BF06-90
Fitting for wiper hose to pass through a bulkhead
90° hose fitting
Bulkhead thickness: 6mm -
Wiper Hose Thru Bulkhead -55mm
Product Code: ZZ-BF55-90
90° Bullhead through Hull Fitting
Bulkhead thickness up to 55mm -
Wiper Speed Control / Interval Controller – High Power Outpu
Product Code: 4569-P
Speich Wiper Speed / Interval Controller
The speed management of a single wiper motor with continuous and intermittent operating Mode
Higher Output drive power than the CT41 and can drive wiper motors up to 85 watt. -
Wired Remote for Marinco Remote Spotlight
Product Code: SPLR-3
Wired remote SPLR-3 for Marinco remote spotlight series.
Suitable for both 12V & 24V systems
Used with the following Marinco Remote Spotlights
SPL-12B, SPL-12C, SPL-12W, SPL-24B, SPL-24W
• Wired Bridge Remote
• Power: 12 or 24 volt (hard wired)
• Dimensions: 88W x 57H x 19D mm
• Weight: 60g
• Housing material: UV resistant PC/ASA
• Button material: Silicone (glow in the dark)
• Operating: temp range -15°C–45°C
• IP Rating: IP56Part Number: SPLR-3
-
Wireless Boat Winch
Product Code: 9244
No more sweating at the boat ramp! Easily load boats up to 900kg. Conveniently operate the winch via the handheld remote.
-
Wireless Device Controller
Product Code: 91354
With a simple click of a button this wireless remote gives you the power to control devices while at the same time being free to move around your boat.
-
Wireless Remote for Marinco Remote Spotlight
Product Code: SPLR-2
Wireless remote SPLR-2 for Marinco remote spotlight series.
Suitable for both 12V & 24V systems
Used with the following Marinco Remote Spotlights
SPL-12B, SPL-12C, SPL-12W, SPL-24B, SPL-24W
• Wireless Bridge Remote
• Power: 12 or 24 volt (hard wired)
• Dimensions: 88W x 57H x 19D mm
• Weight: 60g
• Housing material: UV resistant PC/ASA
• Button material: Silicone (glow in the dark)
• Operating: temp range -15°C–45°C
• IP Rating: IP56Part Number: SPLR-2
-
Wobble Roller Blue Ribbed
Product Code: TC414032
Heavy duty 125mm wobble rollers designed to support and roll a boat on and off the trailer.
Unique design makes retrieval and launching an easy operation. Plus the mobility of the wobbly roller allows the boat to self center on the trailer when winching on. -
XF2 Large Fold-up/Tilting 2 Bike Rack – 60KG Capacity
Product Code: 7020
Tow Bar Mounted – Quick Fit To suit longer wheelbase bikes Fully Folds away – Ideal for hatchback tail gates The latest in Quick Fit Bike Racks have been design to make it easier than ever to transport your bikes with you on your adventures.
-
XF2 Tilting 2 Bike Rack – 60KG Capacity
Product Code: 7021
Tow Bar Mount – Tailgate Tilt
The latest in Quick Fit Bike Racks -
XF3 Large – Folding/Tilting – 3 Bike Rack 60 kg Capacity
Product Code: 7022
The Quick Fit XF3 is a safe and reliable bike carrier for the transportation of 3 bicycles.
-
Y Piece 19mm-19mm-25mm (90787)
Product Code: 90787
Y Piece 19mm-19mm-25mm (90787) -
Y Piece 25mm (90617)
Product Code: 90617
Y Piece 25mm (90617) -
Y Piece 25mm/38mm (90618)
Product Code: 90618
Y Piece 25mm/38mm (90618) -
Y Piece 38mm (90619)
Product Code: 90619
Y Piece 38mm (90619) -
Yamaha Aluminium Trim Tab
Product Code: ANO61N4525101A
Martyr - Yamaha Trim Tab Plate Anode Aluminium
CM61N4525101A 80 x 59 x 26mm
Yamaha replacement trim tab plate anode for 8, 9, 13, 25 & 60HP
Replaces 61N-45251-01
-
Yamaha Cylinder Anode 25-70HP
Product Code: ANO62Y1132500DA
Martyr - Yamaha Cylinder Anode Aluminium
Yamaha part 67F-11325-01-00
Yamaha replacement cylinder anode for F25, F30, F40, F50, F60 & F70
Replaces 62Y-11325-00
Dimensions: 49 x 11.4mm
-
Yamaha Fuel Line (2026)
Product Code: 2026
Yamaha Fuel Line (2026) -
Yamaha Fuel Line Blister Packed (2026-BP)
Product Code: 2026-BP
Yamaha Fuel Line Blister Packed (2026-BP) -
Yamaha Outboard Skeg Anode
Product Code: ANOYAM45371
Yamaha Outboard Replacement Skeg Anode.
-
Yamaha replacement button CM9-46 anode
Product Code: ANO6884525101A
Martyr - Yamaha CM9-46 Aluminium Button Anode
Yamaha replacement button anode for various Yamaha 2T and 4T models from 25 to 85HP
Replaces 688-45251-01, CDZ9-046 - CDZ9-0110 – 6884525101
-
Yamaha replacement skeg anode for V6 60, 70, 75, 85, 90, 115
Product Code: ANO67F4537100A
Martyr - Yamaha Aluminium Skeg Anode
Replacement part for Yamaha part: 67F-45371-00, 688-45371-01, 688-45371-02
Yamaha 67F-45371-00Martyr CM67F4537100A
Dimensions: 91 x 76mm
Suits the following Yamaha engines:
Two stroke: 60FETO (1989+), E60HMHD (1990+), 70BETO (1989+), 75AET (1995-97), 80AETO (1989-96), 85AET (1993-06), 90AETO (1989-18),
Four stroke: FT50BET (2001-06), FT50GET (2005-07), T50L (2015+), FT60BET (2003-07), FT60DET (2005-12), FT60GET (2013-14), T60L T60X (2015+), F70AET (2011-14) F70L F70X (2015+), F75L F75X (2015-17), F80AET (1999-07), F80BET (2005-14), F80L F80X (2015-17), F90L F90X (2015-17), F100AET (1999-06), F100DET (2005-14)
-
Yamaha replacement trim tab anode for 200, 225 and 250HP
Product Code: ANO61A4537100A
Martyr - Yamaha Trim Tab Anode Aluminium
Yamaha replacement trim tab anode for 200, 225 and 250HPCM61A4537100A Dimensions: 99 x 91mm
Replaces 61A-45371-00
Product Information:
For use in salt water and brackish water
Performs better, protects longer than Zinc
Alloy is manufactured to meet or exceed US Military Specification MIL-DTL-24779C(SH)
Tried and tested genuine aluminium product
Aluminum anodes achieve a higher capacity (anode life) while maintaining the same output (level of protection)
Manufactured by the same manufacturer as the genuine OEM
-
Yamaha replacement trim tab skeg anode for 150, 175 & 200HP
Product Code: ANO6K14537100A
Martyr - Yamaha Aluminium Trim Tab Anode
CM6K14537100A 92 x 76mm
Yamaha replacement trim tab skeg anode for 150, 175 & 200HP
Replaces 6K1-45371-00
-
Yamaha Skeg Trim Tab 150, 175, 200, 225hp 2 & 4 Strokes
Product Code: ANO6J94537101A
Martyr - Yamaha Aluminium Trim Tab Anode
CM6J94537101A 100 x 84mm
Yamaha replacement skeg trim tab anode for various 2 & 4 stroke 150, 175, 200 & 225HP models
Replaces 6J9-45371-01
-
Yamaha Trim Tab Anode for 4T 9.9 – 15HP Outboard Engine
Product Code: ANO66M4537100A
Martyr - Yamha Aluminium Trim Tab Anode
CM66M4537100A 53 x 38 x 65mm
Yamaha replacement anode for 4T 9.9-15HP
Replaces 66M-45371-00
-
Yanmar Saildrive Split Anode Kit – Aluminium
Product Code: ANO1964402660KITA
Yanmar Saildrive Split Anode Kit. includes 2 x Anodes separate and 2 x socket head screws
-
Yanmar Saildrive Split Anode Kit – Zinc
Product Code: ANO1964402660KITZ
Yanmar Saildrive Split Anode Kit. includes 2 x Anodes separate and 2 x socket head screws
YOU REQUIRE on your sail drive 2 X PLATES to mount Anodes on ( no need to remove prop)
Martyr Anodes
Suitable for both salt water
Fits Yanmar SD20, SD30, SD31, SD40 and SD50 Saildrives
Also avaible in aluminium sacrificial anode
-
YNZ CAT 1 & CAT 2 Flare Pack
Product Code: PPAK27017
YNZ CAT 1 & Cat II Flare Pack in waterproof container.
2017 Requriement – Contains:
4 x red hand flares
2 x orange smoke torchPlease note that flares are classed as dangeous goods and therefore incur a shipping cost of $45 for North Island delivery or $55 for South Island delivery. Contact us to save on shipping cost if you are ordering multiple items.
-
YNZ CAT 3 4 & 5 Flare Pack
Product Code: PPAK27019
YNZ CAT 3, CAT 4 & CAT 5 Flare Pack in waterproof container.
2017 Requirements – Contains:
2 x red hand flares
2 x orange smoke torchPlease note that flares are classed as dangeous goods and therefore incur a shipping cost of $45 for North Island delivery or $55 for South Island delivery. Contact us to save on shipping cost if you are ordering multiple items.
-
ZF 400 Series Dual Control Head – Pluggable
Product Code: ZF463-4P
ZF Control Head 400 Series - Chrome Lever, Dual, Synch 463-4P
-
ZF MiniCommand Single Control Head
Product Code: ZF4100
MiniCommand
-
ZF MiniCommand Twin Control Head
Product Code: ZF4200
MiniCommand