Lenco Hatch Lifter - HL3000
-
Lenco Linear Actuator – HL3000
Product Code: 5673
-
Lenco Linear Actuator – HL2400S
Product Code: 5669S
Lenco Hatch Lifter - HL2400S
-
Lenco Linear Actuator – HL-2400
Product Code: 5669
Lenco Hatch Lifter - HL-2400
-
Lenco Linear Actuator – HL2000
Product Code: 5668
- Clear anodized aluminum tubing
- Available in 12- and 24-volt
- Complete with 2' lead and Deutsch plug
- Clutchless ball screw design will not drift, never binds and runs in sync on dual lift applications
- Inline motor design delivers over 500 lbs. (226.79 Kg) of force
- Waterproof, made entirely of non corrosive materials
- Ball screw spins freely when hatch is fully opened or closed eliminating limit switches and burned out motors
- Vandar mounting brackets with stainless steel pull pins
- Powdered metal gears for strength and precision
- Stainless steel ram locks in any position
- O-ring sealed at 100 psi
-
Lenco Linear Actuator – HL-1600
Product Code: 5665STD
Lenco Hatch Lifter - HL-1600
-
Lenco Linear Actuator – HL1600S
Product Code: 5665
Lenco Hatch Lifter - HL1600S
-
Lenco Linear Actuator – HL-1200
Product Code: 5664
Lenco Hatch Lifter - HL-1200
-
Lenco Linear Actuator – HL1200S
Product Code: 5663
Lenco Hatch Lifter - HL1200S
-
Lenco Linear Actuator – HL-800
Product Code: 5662
Lenco Hatch Lifter - HL-800
-
Lenco Linear Actuator – HL800S
Product Code: 5661
Lenco Hatch Lifter - HL800S
-
Lenco Linear Actuator – HL-600
Product Code: 5660
Lenco Hatch Lifter - HL-600
-
Lenco Linear Actuator – HL- 400
Product Code: 5659
Lenco Hatch Lifter - HL400
-
Cross Bollard – 316 Polished Stainless
Product Code: 56502-01
Cross Bollard / Mooring Bollard AISI 316 Stainless Steel- Marine grade 316 stainless steel Mirror polished finish
- Passivated and highly polished
- Sampson Post / Cleat
-
Bollard – Slotted 61mm (h) 316 Stainless
Product Code: 56502
Slotted Bollard is made up of marine grade 316 S/S for maximum corrosion resistance and durability. Stainless steel cross bollard with a 12mm slot to allow either your anchor or chain to be secured in the slot. The retaining pin prevents the chain from jumping out and inadvertently deploying the anchor. Polished mirror surface finish and rounded edges prevent chaffing of lines. -
Lenco 9″X12″ Trim Tab Kit – Short Ram – LED
Product Code: 5646
Trim tabs make the single most difference in the way your boat will ride and perform. Lenco trim tabs can make your ride smoother, drier and faster with increased safety and economy. Lenco’s electric ballscrew designed rams are very reliable, powerful and feature instant response.
-
Lenco 9″X12″ Trim Tab Kit – with LED Indicators
Product Code: 5643
Trim tabs make the single most difference in the way your boat will ride and perform. Lenco trim tabs can make your ride smoother, drier and faster with increased safety and economy. Lenco’s electric ballscrew designed rams are very reliable, powerful and feature instant response.
-
Lenco Single Up/Down Switch for twin lifts
Product Code: 5622DUAL
Single up/down rocker style switch for twin lifts.
-
Lenco Up/Down Switch For Single Actuator
Product Code: 5622
Lenco Momentary Up/Down Switch
For controlling a single trim tab ram or hatch lift actuatorsCan control two hatch lifters when wired in parallel.
Voltage: 12v or 24v
Switch Current Rating: 20 AmpsInstallation Manual – Click here to download
-
Lenco 101 XD (SHORT) Power Cylinder 24V
Product Code: 5617STD-24S
Lenco 101 XD Power Cylinder 24V
-
Built for dependable anchor handling, the Bow Roller SS Single Roller provides a strong stainless steel roller assembly for guiding your anchor smoothly over the bow. With two length options available, you can select the size that best suits your boat and mounting space. -
Lenco Pro Control Auto – complete system 9″ x 12″
Product Code: 5601
Meet the Award-Winning Pro Control Auto
-
Lenco Pro Control Auto – complete system 12″ x 12″
Product Code: 5599
Meet the Award-Winning Pro Control Auto
-
Telescopic IOR Dan Buoy – Plastimo
Product Code: 55664
Plastimo’s Telescopic Danbuoys are manufactured to IOR requirements for all offshore use. This rigid model is composed of a telescopic pole with 2 x floatation buoys, neon orange flag, 8m floating rope.
Ergonomic design and superior stability. -
Plastimo Double Ventilator
Product Code: 54391
Connects two ventilation exhausts behind one single louvered vent. Offers multiple combinations in conjunction with two adaptors (flange, straight or elbow stiffening adaptors). The vent is simply clipped on the stiffening adaptors (90 mm space between the two holes). -
TH-Marine Drink Holder – Black – 110mm Ø
Product Code: 54096
Plastic recessed drink holder with Drain (10mm hosetail )
Available in Black onlyDimensions:
Cut out diameter: 95mm
Overall diameter: 110mm
Depth: 90mm -
Drink holder – Recessed – Black 110mm Ø
Product Code: 54094-1
Plastic recessed drink holder
Available in BlackDimensions:
Cut out diameter: 90mm
Overall diameter: 110mm
Depth: 76mm -
Cup Holder Angled SS Rod Holder Combo
Product Code: 54090
Flush Mount Polished Stainless Angled Rod Holder
Dual purpose rod / drink holder with upper section designed to secure cans and bottles.
Robustly manufactured from 316 grade stainless steel for corrosion resistance and durability. -
Rod Holder – Tournament 32mm Rail Mount
Product Code: 54089
Tournament Series Stainless Steel Rod Holder for Larger Rails
Highly polished Stainless steel rod holder designed to easily clamp-on to boat rails. Clamps on to rails and angle can be adjusted 180 degrees vertically to suit your set up. -
Rod holder – Side or Deck mount
Product Code: 54079-2BK
The RodKing Rod Holder is a multi-fit removeable rod holder. It is fully adjustable and can be mounted vertically or deck mounted on a flat surface.
203mm long and has a generous 47mm opening. -
Stainless Rod Holder – Removable
Product Code: 54073
Stainless Steel Rod Holder Made from stainless steel, this rod holder comes with a slimline gunwhale bracket. Bracket allows the user to easily remove the rod holder when not in use for convenient stowage. Perfect for installing the rod holder in areas of high traffic where removal is prefferred.
-
6 Rod Storage Rack Horizontal (54065-H)
Product Code: 54065-H
6 Rod Storage Rack Horizontal (54065-H) -
Mast Step – Folding Step
Product Code: 54049
A strong chrome plated folding step with diamond serrated tread. Stainless steel tension spring for positive location. When the step is not in use it is easily folded vertically so it is clear and out of the way.
-
Antenna Fixed Base 100mm (54044)
Product Code: 54044
Antenna Base - Fixed Position
UV stabilised nylon
70mm diameter base,
-
VHF Adjustable Fold-Flat Antenna Base
Product Code: 54040
Adjustable Base for VHFand AM/FM Radio Antenna’s
-
Rectangular Stepping Plate
Product Code: 54037
Non Skid Step Plate
-
Mast Step
Product Code: 54035
Mast Step
Made of stainless steel with anti-skid teak surfacePolished stainless with 16mm thick teak pad instep grooved to prevent slipping
Easily screwed or rivted to the mast in order to provide convenient step
Dimensions:
286mm (h) x 130mm (w)
Mounting holes of 5 mm diameter (3 top, 3 bottom). -
4 Rod – Rod Rack
Product Code: 54034
Keep your boat deck tidy and your gear safe with the Nuova Rade 4 Rod Storage Rack, a clean and lightweight horizontal rack designed for smooth mounting on bulkheads or cabin sides.
-
Four-rod holding capacity keeps your fishing combos held securely in place and off the deck floor
-
Adjustable mounting feet slide along the length of the rack so you can line up screws perfectly with your existing bulkhead or gunwale holes
-
Molded from tough, UV-stabilized polyethylene built to handle harsh sun, saltwater, and everyday wear
-
Comes complete with marine-grade stainless steel mounting hardware for a solid, rust-free installation right out of the box
-
-
Table Pedestal Complete with Alloy Flush Floor Base and Tabl
Product Code: 54020
Table Pedestal Complete with Aluminium Base and Top
Includes:
54019 - Chromed steel pedestal Leg - 710mm long
54017 - Aluminium Table Top Mount or Base Mount for surface mounting
54018 - Aluminium pedestal flush mount base for floor mountingDimensions
Pedestal Height: 710
Pedestal tube diameter 60mm
Height from floor to underside of table 690mm
Depth Underfloor with flush mount: 50mm
Base diameter: 157mm
Table Mount diameter: 165mm -
Tow Eye U Bolt – 10mm x 115mm
Product Code: 53554
U-Bolt creates a tow eye for connecting trailercraft to the winch wire or rope.
Stainless Steel U Bolt
Dia: 10mm (3/8")
Length: 115mm long
25mm Inside Eye
