Speich Wiper Motor Type S in 24V A typical application for motor S series is for large-sized wiper systems (arms up to 1200 mm) of pleasure boats when the motor is installed below the window, an installation that doesn’t need the electromagnetic brake to fix the arm in park position.
-
Speich Wiper Motor Type S 24v 30 Deg D30
Product Code: 4577
-
Wiper Speed Control / Interval Controller – High Power Outpu
Product Code: 4569-P
Speich Wiper Speed / Interval Controller
The speed management of a single wiper motor with continuous and intermittent operating Mode
Higher Output drive power than the CT41 and can drive wiper motors up to 85 watt. -
Speich 12v 38mm, pantograph arm, 500mm blade kit
Product Code: 4556-KIT
- *Two Speeds: v1 = 70 and v2 = 110 stroke/min
- *Power Consumption: 35W (v1) - 40W (v2)
- *Starting Power: 100W (v1) - 110W (v2)
- *Self-parking on either left or right side.
- *Adjustable wiping angles to suit application (from 45 to 110 degrees)
-
Speich 12v Black Wiper Motor – 38mm shaft
Product Code: 4554B
Speich Nautic Type E Wiper Motor - Torque 12Nm
Two speeds, a self-parking mechanism and variable wiping angle. -
Speich premium Washer and Wiper kit
Product Code: 4554-KIT-S
This premium Speich system incorprates a full spray system to enable trouble free clean windscreen/s on your vessell all year round
- 1 x Fully sealed Speich12v motor with a 38mm Stainless Steel shaft.
- 1 x Speich Stainless steel AISI316 Pantograph 95P arm with built in spray nozzle
- 1 x Black Stainless Steel Powered coated 500mm premium Speich blade
- 1 x 1.9L bottle with built in12v pump
- 1 x 3m length of silicone washer hose
- 1 x 90 Degree bulkhead fitting
-
Speich Dual Windscreen Washer and Wiper kit
Product Code: 4554-KIT-D
This premium Speich system incorprates a full spray system to enable trouble free clean windscreen/s on your vessell all year round
- 2 x Fully sealed Speich12v motor with a 38mm Stainless Steel shaft.
- 2 x Speich Stainless steel AISI316 Pantograph 95P arm with built in spray nozzle
- 2 x Black Stainless Steel Powered coated 500mm premium Speich blade
- 1 x 1.9L bottle with built in12v pump
- 1 x 3m length of silicone washer hose
- 1 x 90 Degree bulkhead fitting
-
Hardtop Premium Wiper package ( 38mm shaft )
Product Code: 4554-KIT
- Speich Pantograph Arm 95P
- Speich 12V E -Series Motor 38mm Shaft
- Speich 500mm Blade
-
3.8 L Washer Tank & 12V Pump
Product Code: 4545-3.8
This horizontal washer tank reservoir holds 3.8 litres and comes complete with 12 volt pump
-
Expanding rubber boat bung with 90° tightening lever. Commonly used on inflatable boats -
RV Water Filler (White) 38mm Hose
Product Code: 45282-W
Water Filler Inlet is used for RV fresh water system and it is constructed with UV stabilized plastic. Internal check valve.
-
RV Water Filler (Black) 38mm Hose
Product Code: 45282
Water Filler Inlet is used for RV & marine fresh water systems.
Constructed with UV stabilized plastic and internal check valve. -
12v instant defrost Ceramic Heater for windshields
Product Code: 4528
Made of plastic, 6’ Power cord, instant defrost for windshield or dash-board or use as a heater for small areas, can adjust 45° up or down, 90° right to left
Size:152.4mm(L) x 114.3mm(W) x 77.8mm(H)
12V, 150W
-
Designer Series Hatch – Grey (4508G)
Product Code: 4508G
The Designer Series Access Hatch is the most attractive and functional hatch design available, featuring a strong build with a sleek finish. It is engineered for versatility and includes multiple safety features to ensure secure access and waterproof sealing. -
Designer Series Hatch – Black (4508B)
Product Code: 4508B
Tackle Box Black (4508B) -
Round Table – Universal
Product Code: 4496
Round Cockpit Table. Product code 4496
-
Seat Swivel – Black Powder Coated
Product Code: 4488
Marine Seat Swivel. A sturdy, swiveling mounting point for a boat seat. This mount does not tilt.
-
maXtek Alloy Seat Swivel
Product Code: 4487
Premium Seat Swivel designed specifically for alloy boats.
Eliminates the possibility of corrosion due to dissimilair metals
-
Flush Mount for SS Pedestal
Product Code: 4484F
Flush Mount for Stainless Steel Pedestal
Made of Stainless Steel this Low profile base fits into the floor. Base can be used as the bottom mount on our table pedestal
Internal Diameter – 49mm
-
Adjustable Stainless Seat Pedestal 510-610mm
Product Code: 4482
Seat Pedestal with 3 set heights
Robust 316 Stainless Steel construction3 Adjustable Heights:
- 610mm max height
- 557mm mid setting
- 510mm Min height.Dimensions:
Pipe diameter: 61mmFloor base diameter: 240mm
Top base diameter: 20mm x 20mm
*Seat not included (just shown in pictures as example of use)
-
maXtek Outboard Transom Wedges
Product Code: 4473-P
Outboard Transom Wedges - Add 5 Degrees of Tuck
(Comes as a pair) -
Rod Holder 316SS Removable
Product Code: 4423
Stainless Rod Holder
-
Premium SS Oval Flush-Mount Rod Holder – 30°
Product Code: 4422
Polished Oval Rod Holder
Our premium flush mount rod holder is robustly manufactured from 316 grade stainless steel for corrosion resistance and durability. The head of the holder is cast in one piece.
* 316 stainless - polished finish
* Robust construction - Cast head
* Black PVC Liner
241 (l) x x I.D. 42mm x 30°Available in a Blister Pack
-
Black Rod Holder – Wide Head with Cap
Product Code: 4409B
Wide head Nylon Rod Holder complete with weathertight Cap
Head: 107mm x 85mm,
Length: 232mm, ID:42mm
Made in Italy
Colour
Black 4409B
-
White Curved 4 Grid Louvered Ventilators (4387)
Product Code: 4387
White Curved 4 Grid Louvered Ventilators (4387) -
Black Curved 4 Grid Louvered Ventilators (4386)
Product Code: 4386
Black Curved 4 Grid Louvered Ventilators (4386) -
6″ Inspection port – Black with Clear
Product Code: 4359C
6" Inspection port - Black surround with Clear Inspection Plate Size refers to hole diameter Deck Plate, screw in-out design (no tools required to open).
-
5″ Black Inspection Port
Product Code: 4358
5" Black Inspection Port
Size refers to hole diameter -
6″ White Inspection Port
Product Code: 4356
6" White Inspection Port
Size refers to hole diameter -
Thru Hull One Way Scupper Valve
Product Code: 43242
Thru-Hull Scupper valve for Inflatable boats
Large Ø68mm diameter outlet forfast evacutaion of water
Non-return valve -
Flush Mount 2 Burner Hob
Product Code: 432041
2 Burner Hob that is built in to the bench top
Stylish quality product deigned for the marine environment
- Stainless Steel Construction
- Thermocouple protection on all burners
- Made in France
Specifications:
Large burner output is 8000 BTU's
Medium burner output is 5600 BTU'sDimensions:
H 80 x L 465 x D 335 mm -
Split Well Grommet
Product Code: 4312
Split Well Grommet
No Dissasembly of Mechanical Parts Required When Replacing. -
Steering Cable Rubber Cone
Product Code: 4308
Grommet - Steering Cable Rubber Cone
Bulkhead boot for electrical cables, pipes and steering systems
A: 11mm, B: 109mm, C: 103mm, D: 69mm, E: 5mm -
Grommet – Cone with Ring
Product Code: 4307
Grommet - Cone with Ring
Usually used for passing steering cables or electrical cables through bulkheads.
B: 110mm, C: 72mm, E:13mm -
Trim Ring – Oval
Product Code: 4306
Oval Protection Ring
Protect hoses, wiring from chafing through bulkheads and boat transoms.
Manufactured from durable rubber
Dimensions:
External: 89mm (w) x 133mm (l) X 9.5 (depth)
Internal: 50mm" x 100mm -
Trim Ring – Round
Product Code: 4305
Trim Ring - Round
External: 3-1/2" (External Diameter) X 3/8" (Depth)
2" (Internal Diameter) -
Top Hat – Oval
Product Code: 4304
Chaffing Protection Grommet
Ocal Shaped potection grommet for outboard steering cables through boat transoms.
Dimensions:
External: 89mm (h) x 134mm (w) X 60 (d)
Internal: 50 x 100mm -
Top Hat – Round
Product Code: 4303
Top Hat - Round Protection Grommet
Round Top Hat grommet for the protection of outboard steering cables through boat transoms.
External: 89mm (dia) x 60mm (h)
50mm (Internal Diameter) -
Drink Holder – Folding – White
Product Code: 4253
Enjoy your drink without worrying about spills. The adjustable arm can hold large and small cups and bottles, plus it folds neatly when not in use. Pre-moulded screw holes make mounting a breeze.
