Rigging Hose Internal measurement 2 Inch or 50 mm
-
Rigging Hose 2.0 (50mm) Per FT
Product Code: STHOSE2INCH
-
MaXtek Hydraulic Steering Elbow S/S for 3/8″ hose
Product Code: STHLO14NOS
maXtek cylinder or helm ( 1/4" ) --> MaXtek Hose ( 3/8" )
-
MaXtek Hydraulic Steering Elbow S/S for 1/4″ hose
Product Code: STHLO14H0S
maXtek cylinder or helm ( 1/4" ) --> MaXtek Hose ( 1/4" )
-
MaXtek Hydraulic Steering Elbow S/S Adapter seastar
Product Code: STHLO14B0S
maXtek cylinder/helm (1/4") -->Seastar/Uflex hose (5/16")
-
Flex Sleeving Per Roll (50ft)
Product Code: STFLEX ROLL
FLEX is a lightweight, braided jacketing for bundling and protecting wires, cables and hoses.
-
Flex Sleeving Per FT
Product Code: STFLEX
FLEX is a lightweight, braided jacketing for bundling and protecting wires, cables and hoses.
-
Rigging Hose Flange 2 (50mm)
Product Code: STFLANG2
Moulded polypropylene flange is internally threaded to retain hose and to make rigging adjustment simple.
-
MaXtek reusable hose coupling for 1/4″ Hose – Pairs
Product Code: STCOU1/4
maXtek Marine Hydraulic Outboard Steering
Reusable Couplings to fit 1/4” hose
Single outboard engine application up to 150HP
Contents of kit:- Two couplings
-
MaXtek Marine Hydraulic Steering Helm Oil Cap ( Vented )
Product Code: STCAP-1
MaXtek Marine Hydraulic Steering Helm Oil Cap ( Vented ) -
Steering Plate for Yamaha f30hp up to f70hp
Product Code: STC3520815
A commerical grade adapter ( R4 ) to connect our ST150H-18 or ST350H-25 systems to a F30 - F70 Yamaha outboard.
Also use this to suit Yamaha 90hp 2stroke.
-
MaXtek Hydraulic steering Seal kit for 350hp cylinder
Product Code: STC3520802
MaXtek Hydraulic steering Seal kit for 350hp cylinder -
MaXtek Hydraulic steering Seal kit for 150hp cylinder Pair
Product Code: STC3016802
Genuine original replacement seals for the Maxtek ST3016-1 cylinder (150HP and under outboard engines). This pair of corrosion-resistant seals ensures leak-free hydraulic operation, perfectly complementing the cylinder's hard-chrome-plated stainless steel shaft and anodized aluminum body.
-
Maxtek Marine Seal kit for helm pumps
Product Code: STC1800804
Maxtek Marine Seal kit for helm pumps -
Hydraulic Steering Bulkhead Mounting Plate Twin Hose
Product Code: STB200
Looking for a tidy, watertight way to pass Hydraulic Steering hoses through a transom this is the way to do it.
-
STACK-A-PLATE
Product Code: STACKAPLATE
STACK-A-PLATE Stacks plates safely
-
maXtek Marine 700hp High Horsepower Complete Kit
Product Code: ST700H-25
maxtek Marine’s highest performance hydraulic steering system.
-
Maxtek 700hp Hydraulic Steering Cylinder for High Horsepower
Product Code: ST3822W
Maxtek Marine’s highest performance hydraulic steering cylinder. Designed specifically around commercial and multi engine applications requiring the ultimate in perfromance.
-
MaXtek Marine Hydraulic Steering Cylinder 350hp
Product Code: ST3520H-R1
The Maxtek Mairine Bullhorn Mount Hydraulic Cylinder is designed to be used on all ( 2 or 4 Stroke ) outboard engines 350hp and less.
Rigorous testing and over engineered components enable this powerful cylinder to be able to handle the weight and torque of modern 4 stroke outboards
- Stainless Steel Shaft with Hard Chrome Plating
- Anodized Aluminium Tube and Bullhorns
- Stainless Steel Lock nuts
- Compact design for limited engine wells
- Balanced Cylinder – equal turns lock to lock
Standard mounting bracket to suit nearly all outboards – please see adapter plate for Yamaha F30 – F70
-
Bulkhead fittings for hydraulic Hose
Product Code: ST352
MaXtek Marine Hydraulic Outboard Steering - Bulkhead fitting
Used in applications requiring the hydraulic hose to go through the transom of the vessel. specifically made to suit the Maxtek Marine ST-350 system
Contents of kit:- One Stainless Bulkhead fitting
- One Elbow 3/8”
-
MaXtek Marine Tiebar – Hydraulic Steering Kit
Product Code: ST350HT1-22
Maxtek Marine twin engine, single cylinder , mechanical tiebar, hydraulic steering complete package
Suitable for twin engine setups’ that can utilise a mechancial tiebar set up.
- 600hp for counter rotating engines
- 450hp for non-counter rotating engines
Kit contains
- Front Mount 25cc Helm Pump - Heavy Duty (5.3 Turns lock to lock)
- Heavy duty bullhorn Mount Hydraulic Cylinder
- 15m Hydraulic Hose With Crimped Fittings Each End (user cuts to required length)
- Maxtek Marine Mechanical Tie Bar
- Pair of Maxtek Marine Re-usable Couplings
- 2 x 1L Maxtek Marine Hydraulic Steering Oil
- All fittings for the helm connection
Installed by leading NZ boatbuilders including, Buccaneer, CSB Huntsman, Senator, Smuggler, Southern Boats, Lazercraft boats, Bluefin, KiwiKraft, Raeline, Pinnacle Boats, Ultimate Boats, DNA boats, Highfield boats, Osprey Boats.
-
Maxtek Marine Inboard Steering Cylinder
Product Code: ST3214B
Maxtek Marine’s Balanced Inboard steering cylinder for Stern Drive systems ( non power assist ). Designed specifically around commercial applications
- Stainless steel shaft with hard chrome plate
- Aluminum tube with anodizing
- Compact Design for less space installation
- Balanced cylinder : The number of turns lock to lock is equal port to starboard
- Can be used as a side mount installation for outboard application 150hp and under
-
MaXtek Marine Hydraulic Steering Cylinder 150hp
Product Code: ST3016-1
The Maxtek Mairine Bullhorn Mount Hydraulic Cylinder is designed to be used on all ( 2 or 4 Stroke ) outboard engines 150hp and less.
Rigorous testing and over engineered components enable this powerful cylinder to be able to handle the weight and torque of modern 4 stroke outboards
- Stainless Steel Shaft with Hard Chrome Plating
- Anodized Aluminium Tube and Bullhorns
- Stainless Steel Lock nuts
- Compact design for limited engine wells
- Balanced Cylinder – equal turns lock to lock
Standard mounting bracket to suit nearly all outboards – please see adapter plate for Yamaha F30 – F70
-
Steering Engine Well Mounting Kit
Product Code: ST13802
15° Splashwell Mounting Kit
Add this kit to make the splashwell the point at which the push-pull cable is mounted. Includes threaded tube, splashwell guard and mounting hardware.
* Ball and socket motion aligns the steering cable automatically
* Corrosion-resistant stainless and aluminium construction
Well stainless Gland Diameter: 78mm
Compatable with TELFEX SA27254
-
Transom Support Mounting Kit
Product Code: ST13800
Bolts to the inside of your transom and provides an anchoring point for the steering cable.
The Mechanical Steering Connection Clamp Block, can be used as a standoff from the transom (outboards without tilt tubes) or on a stringer (inboard model) for the steering cable.
* White powder coated finish
* Aluminium and stainless steel construction -
Steering Cable – 17ft Helm Cable only
Product Code: ST13717C
Steering Cable - 17ft Helm Cable only -
Steering Kit 17′ (5.2M) Cable (ST13717)
Product Code: ST13717
Steering Kit 17' (5.2M) Cable (ST13717) -
Steering Cable – 16ft Helm Cable only
Product Code: ST13716C
Steering Cable - 16ft Helm Cable only -
Steering Kit 16′ (4.8M) Cable (ST13716)
Product Code: ST13716
Steering Kit 16' (4.8M) Cable (ST13716) -
Steering Cable – 15ft Helm Cable only
Product Code: ST13715C
Steering Cable - 15ft Helm Cable only -
Steering kit with 15 foot cable (ST13715)
Product Code: ST13715
Steering kit with 15 foot cable (ST13715) -
Steering Cable – 14ft Helm Cable only
Product Code: ST13714C
Steering Cable - 14ft Helm Cable only -
Steering kit with 14 foot cable (ST13714)
Product Code: ST13714
Steering kit with 14 foot cable (ST13714) -
Steering Cable – 13ft Helm Cable only
Product Code: ST13713C
Steering Cable - 13ft Helm Cable only -
Steering kit with 13 foot cable (ST13713)
Product Code: ST13713
Steering kit with 13 foot cable (ST13713) -
Steering Cable – 12ft Helm Cable only
Product Code: ST13712C
Steering Cable - 12ft Helm Cable only -
Steering Kit – Helm , Bezel with 12ft Cable (ST13712)
Product Code: ST13712
Steering Kit - Helm , Bezel with 12ft Cable (ST13712) -
Steering Cable – 11ft Helm Cable only
Product Code: ST13711C
Steering Cable - 11ft Helm Cable only -
Steering Kit – Helm , Bezel with 11ft Cable (ST13711)
Product Code: ST13711
Steering Kit - Helm , Bezel with 11ft Cable (ST13711) -
Steering Kit – Helm , Bezel with 10ft Cable (ST13710)
Product Code: ST13710
Steering Kit - Helm , Bezel with 10ft Cable (ST13710) -
Maxtek Marine Yamaha steering kit
Product Code: ST-YAM25
maXtek marine high performance system to integrate with the new Yamaha integrated hydraulic steering. ( Yamaha F150, F175 & F200 )
With proven parts from the maXtek marine ST-350 system, you can be ensured feather light steering on your new outboard.
Kit contains
- maXtek marine commercial grade 25cc helm
- flexible, double sheathed nylon hose ( 15m ) with 2 crimped Stainless steel fittings
- a pair of re-usable couplings for other ends of hoses
- a pair of hose adapters to suit the Yamaha tee provided with the outboard
- 2 x 1L bottle of premium maXtek marine hydraulic steering oil
- bleeding kit