Premium grade maXtek primer bulb with 8mm (5/16”) hose tails
Low permeation bulb material stands up to ethanol blended fuels. Superior construction resist ballooning under pressure and collapsing under vacuum. 5/16" hose barbs are secured using stainless clamps to avoid corrosion and offer a leak-free seal. For faster priming that will meet current regulations, exceed OEM specifications and stand up to blended fuels.
-
-
Replacement Propellor Nut Anodes
-
Martyr Prop Nut Anodes
-
Rail Mount Aux Outboard Bracket
Product Code: 10319
Ideal for permanently mounting your outboard on the stern rail instead of storing it when not in use. Constructed from rigid, non-slip UV resistant polypropylene, the bracket provides a secure and stable mount for your auxiliary outboard engine. Designed to fit 25mm diameter rails.
-
Raw Water Filter – Large
Product Code: NS18526-02
The raw water filter is designed to reduce solids, particles and other impurities from entering the pipe system or engine.
-
Raw Water Filter – Small
Product Code: NS18526-01
The raw water filter is designed to reduce solids, particles and other impurities from entering the pipe system or engine.
-
Raw water Intake Strainer SS316 – Oval
Product Code: 541107
Stainless Steel through hull fitting for cooling water Intake
-
Raymarine (SKR04)
Product Code: SKR04
Raymarine (SKR04) -
Rectangular vent with dorade box
Product Code: 4381
Vent configuration allows airflow in without water egress. Typical application includes the supply vent for engine room blowers.
Manufactured in Europe. -
Rigging Hose Flange 2 (50mm)
Product Code: STFLANG2
Moulded polypropylene flange is internally threaded to retain hose and to make rigging adjustment simple.
-
Rigging Hose Flange 2″ (50mm) w Fuel Line Port
Product Code: STHPORT
Bulkhead Rigging Hose Flange with auxilary fuel line port
-
Round Strainer 1 1/4″
Product Code: 90556
Non-metallic and non-corroding, these strainers are ideal for small gen-sets and water makers.
-
Rubber Exhaust Cover – 3″
Product Code: 42511
Rubber Exhaust Cover / flap
Internal is 3 inch or 77mm, external 3-3/4 or 93mm, 1 ½ inch or 38mm deep
Designed and rebated to take a pipe clamp.
Actual measurements show that the rubber would fit on a pipe with a external diameter of 75mm and should stretch tightly onto a 80mm (OD) pipe.
-
Rubber Exhaust Cover, 4″
Product Code: 42512
Rubber Exhaust Cover / flap
Internal 4inch or 100mm, external 4-1/2 inch or 118mm
Designed and rebated to take a pipe clamp.
Actual measurements show that the rubber would fit on a pipe with a external diameter of 100mm and should stretch tightly onto a 105mm (OD) pipe.
-
Rudder Anode – 1-7/8″ CMR-1 Aluminium
Product Code: ANOR01AL
Rudder Anode - 1-7/8" CMR-1
Cadmium-free Aluminium
Dimensions:
47mm Diameter
6mm Thick each half
Weight: 0.03kg -
Rudder Anode – 2-3/16″ CMR-2 Aluminium
Product Code: ANOR02AL
Rudder Anode - 2-3/16" CMR-2
Cadmium-free Aluminium
Dimensions:
71mm Diameter
12mm Thick each half
Weight: 0.2kg -
Rudder Anode – 3-3/4″ CMR-3 Aluminium
Product Code: ANOR03AL
Rudder Anode - 3-3/4" CMR-3
Cadmium-free Aluminium
Dimensions:
95mm Diameter
12mm Thick each half
Weight: 0.374kg
Mnfg No: CMR03AL -
Rudder Anode – 5″ CMR-4 Aluminium
Product Code: ANOR04AL
Rudder Anode - 5" CMR-4
Cadmium-free Aluminium Martyr Anodes
Dimensions:
127mm Diameter
16mm Thick each half
Weight: 0.57kg -
Rudder Anode – 90mm x 17mm – Aluminium
Product Code: ANOCMF90A
Rudder Anode – European style.
Dimensions:
90mm Diameter
17mm Height
Weight: 0.15Cadmium-free Aluminium
-
Salt Attack 3.8 Litre Bulk Concentrate
Product Code: CLSALT4L
Salt-Attack Salt Remover uses the latest blend of bio-based surfactants, chelating agents, and corrosion inhibitors to quickly eliminate surface tension allowing for salt to be quickly and safely removed from all surfaces. Use to wash down and protect your trailer, boat, fishing/spearfishing/dive gear, car, house windows, and all your other toys exposed to salt spray. -
Salt Attack 946ml Concentrate
Product Code: CLSALT
Salt-Attack Salt Remover uses the latest blend of bio-based surfactants, chelating agents, and corrosion inhibitors to quickly eliminate surface tension allowing for salt to be quickly and safely removed from all surfaces. Use to wash down and protect your trailer, boat, fishing/spearfishing/dive gear, car, house windows, and all your other toys exposed to salt spray. -
Salt Attack Concentrate 946ml + Mixer
Product Code: CLSALTM
Salt-Attack Salt Remover uses the latest blend of bio-based surfactants, chelating agents, and corrosion inhibitors to quickly eliminate surface tension allowing for salt to be quickly and safely removed from all surfaces. Use to wash down and protect your trailer, boat, fishing/spearfishing/dive gear, car, house windows, and all your other toys exposed to salt spray. -
Salt-Attack – Direct Injection
Product Code: SADI
Salt-Attack Direct Injection Kit is designed to flush and protect the cooling systems of all moored vessels with inboard/outboard stern drive motors. Easy installation, connects to 12V or 24V and comes ready to install with all wiring, tubing, rocker on/off switch and quick connect fittings. -
Salt-Attack Mixer
Product Code: CLSALTMIX
Salt-Attack Mixer makes protecting your gear easy. Automatically mixes and dispenses Salt-Attack at the correct ratio. -
Scoop Black 2″ 177mm x 130mm (91045)
Product Code: 91045
Scoop Black 2" 177mm x 130mm (91045) -
Scoop Strainer SS316 – Surface Mount
Product Code: 541105
Stainless external water pickup strainer.
-
Seastar B700SS Dual Function Engine Control
Product Code: 60051
One of the worlds most commonly used motor controls: single handle control for yachts or power.
-
Seastar DC Control
Product Code: 306990
Accepts universal 30/33 series Cables, CC230, CC330, CC332, CX632 and CCX633
-
Martyr Alloy Sacrificial Shaft Anodes
-
Shaft Anode – Streamline – 1 1/8″ CMX-4 Aluminium (ANOX04AL)
Product Code: ANOX04AL
Shaft Anode - Streamline - 1 1/8" CMX-4 Aluminium (ANOX04AL) -
Sidepower Fits Anode SP125, SP155, SP240, SP285, SE120, SE1
Product Code: ANOSP626Z
Martyr - Side-Power Large Zinc Bow Thruster Anode
CM9-102 Sleipner Side-Power 201180 replacement Zinc Anode for Bow Thrusters
48mm Outside diameter
42mm Height
6mm Bolt hole
24mm Hex mounting recess
300g WeightFits Models:
Fits models SP125, SP155, SP240, SP285, SE120, SE130, SE150, SE170, SE210, SE240, SE285, SH160, SH240, SH300, SAC250, SAC300.
Installation is simple with anode easily mounted above or below the water and can be completed without removing the propelle
-
SidePower Thruster Anode – SP30, S2I, 30S, 40Si & 40S
Product Code: ANOSL563Z
Side-Power Cone Zinc Bow Thruster Anode
CM9-103 Sleipner Side-Power 61180 replacement Zinc Anode for Bow Thrusters
25mm Outside diameter
21mm Height
7mm Bolt hole
11 x 7mm Hex mounting recess
300g WeightFits Models:
-
Single Engine Control – Dual Action
Product Code: 60060
Single Engine Control - Dual Action Dual action lever Both gear operation and throttle is achieved on the single lever. Suitable for most boat/engine combinations using control cables for throttle or gears Neutral Safety Switch included Prevents accidental staring of the engines whilst engaged in gear. Neutral Fast Idle Neutral throttle can be achieved with the pull-out of the gear/throttle lever Construction Ergonomically designed and neat installation.
-
Single Engine Control Chromed Brass
Product Code: 60057
Single Engine Control ** Chromed Brass (Not Stainless) Less corrosion issues with this finish ** Highly polished chrome finish For Clutch or Throttle Base Plate Dimensions 76mm (W) 136mm (L) Single lever cable control for throttle or gears.
-
Sleipner Side-Power 71190/51180 replacement Zinc Anode CM9-1
Product Code: ANOSL565Z
Martyr - Side-Power Small Zinc Bow Thruster Anode
CM9-101 Sleipner Side-Power 71190/51180 replacement Zinc Anode for Bow Thrusters
44mm Outside diameter
20mm Height
6mm Bolt hole
20mm Hex mounting recess
120g Weight -
Square Vent ABS Plastic – 118mm X 118mm
Product Code: 4382
Ventilation Shaft Grille
Square Vent 118mm X 118mm -
SS Louvre Vent – Round 5″
Product Code: 13505
- Marine grade Stainless Steel
- Surface mount
- 127mmDiameter
-
Stainless Steel Exhaust Fitting
Product Code: 7573S
Stainless Steel Exhaust Fitting.
The exhaust hose can be fitted directly to this transom connection.
61mm width of hose pipe.
101mm width with flange.
114mm total length.
-
Stainless Steel Exhaust Transom Fitting
Product Code: 7574S
Stainless Steel Exhaust Transom fitting
The exhaust hose can be fitted directly to this transom connection.
76mm ( 3") Hose pipe x 120 mm (4 3/4") Flange
Overall length 120mm -
Teleflex Morse CH2600P Engine Control
Product Code: 60056
Dual-function control — each lever controls throttle AND shift. Virtually all single-station outboards and stern drives with mechanical transmissions. Single lever, dual action design controls throttle and shift with one lever. (Mounts to gunwale surface — no hole cutout required.) It’s an excellent replacement for both outboard and stern drive controls using universal (3300/33C type) cables only.