-
Flush Recessed Grab Handle
Product Code: 1869
Black Recessed Flush Grab Handle Suitable for; * Floor boards * Marine applications * RV Vehicles * Access hatches * Cupboards/ Drawers / Doors • Flush Grab Handle • Flush Pull • Flush Grab Handle -
Adjustable Nylon Door Holder Black
Product Code: 1715
Adjustable Nylon Door Holder Colour: Black -
Moulded in black EPDM rubber with pressed stainless steel brackets. Very popular quick latch for hatches. Simple ‘T’ handle for ease of operation. Ideal for applications where there is constant vibration, movement or misalignment. -
Fiamma Vent 160 – 400 x 400
Product Code: 4900
Fiamma 160 Roof Vent Installs on 390mm x 390mm apertures and up to 400mm x 400mm openings Aerodynamically shaped top to reduce wind noise at high speed Can be installed on roofs from 25mm to 50mm thick -
Oval Cockpit Table.
-
The stud swage is made from grade 316 stainless steel for maximum corrosion resistance. This can be combined with a stainless steel grade 316 pelican hook, suitable for lifeline applications where a gate is desired.
-
Stainless deck mounted ring that swivels through 360 degress
-
This sailboat swivel eye snaphook is from grade 316 stainless steel, and designed for flexibility in use in multiple settings.
-
A snap shackle is a fast action fastener which can be implemented single handed. It uses a spring activated locking mechanism to close a hinged shackle and can be unfastened under load.
-
Made from marine grade stainless steel 316, these swivel snapshackle with jaw, uses a spring activated locking mechanism to close a hinged shackle cand can be unfastened uder load. It includes a removable shackle pin.
-
Rope Jammers
White Nylon
UV Resistant -
This stainless steel marine grade 316, seine snatch block with its casting sheave with eye top, is a solid and strong block.
-
These stainless steel 316 shackle keys are handy around the boat for tightening and undoing shackles and various bolts.
Key 187 is useful on shackles and as a bottle opener. -
Stainless steel 316 screw eye thread with separate ring.
Designed to thread directly into wood. Cast eye with tapered cut thread and attractive polished stainless finish. -
Stainless steel 316 swivelling pad eye is a great attachment point.
-
Made from stainless steel 316, these bimini top slide fittings can be used to slide into the bimini top cap fitting to enable allow a pivoting position for folding bimini frame.
-
Made from stainless steel 316, these eye bimini top cap fitting are for the replacement round tube outside eye.
-
Manufactured from high quality stainless steel 316, these closed body turnbuckles, also known as rigging screws, tensioners or bottlescrews. Pipe type with hook and eye end.
-
The pelican hook is made from grade 316 stainless steel for maximum corrosion resistance. This hook can be combined with a stainless steel grade 316 swage stud, suitable for lifeline applications where a gate is desired.
-
Midget Ventilator Stainless Steel -
Premium Grade Retractable Cleat from the USA The Attwood Neat Cleat offers what you've been asking for, a retractable cleat with a thin profile that installs easily in narrow gunwales. Beautiful, strong and durable, each stanchion is a 7/8" rod of solid enhanced #316 Stainless Steel alloy. The Friction springs holds the cleat up at any position and makes sure it stays up when pulled up. -
Handle for Top Line 180 Hatch White, Grey and Black- Handle 75mm
- Fitting 56mm
-
These stainless steel 316 key shackle also known as a halyard shackle with locking pin for opening a closing, is done simply by rotating the pin half a turn. Used for applications requiring to open/close the shackle often.
-
Flush mounted push-to-close latch Installs easily into a 50mm cut-out hole and without the need for trim rings or bezels. -
Manufactured from high quality stainless steel 316, these closed body turnbuckles, also known as rigging screws, tensioners or bottlescrews. Frame type with hook and eye end.
-
Tru Design Scoop Strainers keep debris from entering water or air intakes whilst promoting a healthy flow of water or air. Moulded in a glass reinforced nylon composite for both strength and the elimination of electrolysis. -
Made from marine grade stainless steel 316, these fixed eye snapshackle is for general purpose such as genoa halyards, uphauls, downhauls and outhauls, where a permanent non-swivel action end is required.
-
Made from stainless steel 316 the spring snaps are designed as a quick and easy fitting for connecting wire to a fixed point, with its asymmetrical spring latch for secure closing. For e.g. holding a flagpole banner to a fence.
-
These stainless steel 316 quick links are designed to where a quick connection piece is needed between two chain eye or hook with eye end.
-
Stainless steel 316 Long Eye plate also known as a Pad Eye are used to form a fixing onto wall or posts. Stamped and welded construction. -
Made from stainless steel marine grade 316, these mame swivel blocks with nylon double sheave are specifically designed as a light pulley function.
-
Made from stainless steel marine grade 316, these mame swivel blocks with nylon single sheave are specifically designed as a light pulley function.
-
Made from stainless steel marine grade 316, these mame swivel blocks with cast single sheave are specifically designed as a light pulley function.
-
Manufactured from stainless steel 316 grade, Dee shackles are more common than most other shackle types. An alternative to a snap hook, used to fix your shade sail to a chain or direct to a fixing point.
-
These stainless steel 316 key shackle also known as a halyard shackle with crossbar and locking pin for opening a closing, is done simply by rotating the pin half a turn. Used for applications required to open/close the shackle often.
-
The stainless steel 316 high eyebolt, with fully threaded with collar.
-
Stainless Gas Struts Pressurised strut, brackets and studs are all manufactured from stainless steel in order to provide long life. Telescopic hatch stay applied force: 255mm = 100N (Approx. 10kg) 385mm = 200N (Approx. 20kg) 485mm = 300N (Approx. 30kg) -
Gas Strut 255mm (116831-BP)
Product Code: 116831-BP
Premium Grade Stainless Gas Support Struts Pressurised strut, brackets and studs are all manufactured from stainless steel Mounting Bracket included Telescopic hatch stay applied force: 255mm = 100N (Approx. 10kg) -
These stainless steel 316 U Bolt with washer and nuts maybe used where an eyebolt would be too small or to go over tubing e.g. deckware
