Fully compliant with of the new mandate for float free EPIRBs for commercial fishing vessels
Fully compliant with of the new mandate for float free EPIRBs for commercial fishing vessels
The world’s first AIS EPIRB, the multi award winning G8 AIS, is the only beacon that meets SOLAS 2022 AIS requirements.
New AIS SART
Man overboard rescue system including a 40m rope, a u-shaped floating belt and a storage bag with guardrail fastening system.
Outer dimensions pack: 49cm x 16cm x 30cm
Optimist Buoyancy Bag with vlave
Made of Polyester
Dimensions: 43 x 100 x 50cm
Max Air Pressure: 3.6 PSI
Designed to comply with IOD'95 Rule
Spare 12 / 24V LED for Plastimo compasses (including the Offshore 115 & Olympic 115 models from 2014)
Plastimo LED 12v/24v Light for Compasses
LED is WHITE
Multi-purpose compass: dinghy sailing, cruising, powerboating...
Thanks to its gimballed magnetic cell, the Mini-C adapts to any location on board, vertical or horizontal. Installation is very easy: simply flush-mounted, vertically on a bulkhead or horizontally on the dashboard or instrument pod.
Plastimo Contest 101 Bulkhead Mount Compass, Vertical bulkhead mount for sailboats from 30 ft.
Multi-position mounting course and hand-bearing compass.
Plastimo Mini Contest Bulkhead Mount Compass Black, with a 70 mm card and suitable for boats 19-34 ft.
To obtain a bracket-mount compass, please order a flushmount compass AND add this bracket.
Bracket kit includes actual bracket and bespoke screws.
Plastimo Offshore 115 Compass Black Body - Conical Card
Suitable for vessels under survey
SOLAS approved
Binnacle available as an option (61000)
Plastimo Offshore 115 Compass Black Body - Flat Card
Binnacle for Plastimo Offshore 115 Compass Black Body
The famous Offshore compass with retractable cover, present on the majority of open hulls, semi-rigid, motor cruisers and motor catamarans. Recessed or on a bracket, it adapts to all cockpits or dashboards and offers optimal readability. Magnetic equipment mounted on a shock absorber, for excellent resistance to shocks and vibrations.
The Plastimo Offshore 135 Flush Mount Compass is specifically designed for power or sail boats of 10m (33ft) and above. It is designed to be flush mounted, however it can be bracket mounted with the addition of an optional bracket (as shown in the image). It features a protective hood and a built in sliding cover.
Plastimo Offshore 75 Compass Black Body – Conical Card
Power Boat Flare Pack in waterproof container.
Contains:
2 x red hand flares
1 x orange smoke torch
The green Quell Premium First Aid kit features zip shut sealed internal plastic pockets to allow instantaneous viewing of all contents in the event of emergency.
Radar Reflector
Complies with the R.O.R.C
Collapses and lies flat for storage
305mm(L) X 415mm(H) X 305mm(W)
Non Skid Step Plate
Retro reflective tape to SOLAS (LSA Code) by Lalizas. Lengths - 1m cut from roll
Retro reflective tape to SOLAS (LSA Code) by Lalizas. Length 40m.
Replacement Diaphragm for 18510 (Hand bilge pump 12GPM)
125mm diameter
Replacement Diaphragm for 18515 (Hand bilge pump 15GPM)
Bilge Rule 500GPH Submersible Bilge Pump 12V
The High-Water Bilge Alarm consists of a non-mercury float switch and an in-dash gauge that features both a visual and an audible 85DB alarm.
Rule Submersible Bilge Pump 1100GPH.
The Rule-Mate® 2000 GPH pump consists of a powerful Rule® bilge pump and a highly intelligent circuit board in a single housing. The pump activated when the water reaches 2-1/2" and automatically shuts off when the pump senses no water against the impeller, reducing the remaining water to approximately 5/8".
The Smartfind S20 AIS MOB is designed to be fitted to a lifejacket using the clips supplied, ready to be activated in the event of a man overboard situation.
Safety Rope Ladder
Safety Harness with high visibility.
Suction hand hose Hose Diameter: 12.5mm Hose Length: 1600mm Suitable for Petrol , Diesel or Water 1. Place the bottom end of the hose pipe into the tank with the liquid that you wish to pump out and hold the top end of the hosepipe upright. 2. Shake the bottom end of the hose vigorously up and down until the liquid rises in the hose.