BEP 702 Distribution Stud
-
BEP 702 Distribution Stud
Product Code: 702
-
BEP 702 Distribution Stud – 2 Terminals (8mm and 10mm)
Product Code: 702-8-10
The Contour Distribution Stud allows terminating of heavy duty cables for one or more connections.
Contour lock mouldings with removable side plates allow for connections from all sides. -
BEP 702 Distribution Stud – 2 x 10mm Studs
Product Code: 702-2S
The Contour Distribution Stud allows terminating of heavy duty cables for one or more connections.
Contour lock mouldings with removable side plates allow for connections from all sides. -
BEP 702 Distribution Stud – 8mm
Product Code: 702-8-B
BEP 702 Distribution Stud
-
BEP 707 Circuit Breaker Module
Product Code: 707
BEP 707 Circuit Breaker Module offers provision for three circuit breakers ideal for medium duty loads, like waste treatment systems and electric toilets.
-
BEP 720 Heavy Duty On/Off Battery Switch
Product Code: 720
The 720 Heavy Duty Battery Switch follows the successful release of the 701 switch in 1999. It fits into the same contour lock system as used on the battery distribution system.
-
BEP 720 Remote Operated Motorised Battery Switch with Optica
Product Code: 720-MDO
The 720-MDO is a high current (500A), remotely activated battery switch.
Remote operation allows the battery switch positioned where cable runs can be minimized. Reduced cable runs allow smaller section cable to be used, resulting in significant reductions in cable cost, plus weight savingsThe 720-MDO Version 8 has new installation options, whereby the motor/circuit board can be fed from an independent 12V or 24V supply. -
BEP 720 Remote Operated Motorised Emergency Parallel Switch
Product Code: 720-MDO-EP
The 720-MDO-EP (Emergency Parallel Switch) provides remotely activated, high current, emergency parallel connection of two battery banks for a 10 minute period following activation of the remote switch.
-
BEP 721 Heavy Duty Battery Selector Switch
Product Code: 721
The BEP 721 Battery Selector Switch is a heavy duty selector switch. Housed in the same module as the 720, it includes the same removable plates and back cover. While BEP Marine recommends isolated battery systems as outlined with our distribution clusters, the 721 offers a simple economical way of separating two batteries.
-
BEP 800-MS1 Battery Management Panel
Product Code: 800-MS1
On larger boats there is normally space to recess a Battery Management Panel. BEP Marine has made numerous custom panels for different boat manufacturers and has seen the need to create a standard range for custom boat builders.
Features:
•Essential circuits, 24 hour supply
•Mains breakers for control panels, davit winches, or treatment systems
•Heavy duty breakers for anchor winches
•Powder coated aluminium panel
•Spare positions for additional battery switches and circuit breakers for extras such as radio batteries and genset batteries
-
BEP 800-MS2 Battery Management Panel
Product Code: 800-MS2
On larger boats there is normally space to recess a Battery ManagementPanel. BEP Marine has made numerous custom panels for different boatmanufacturers and has seen the need to create a standard range forcustom boat builders.
Features:
•Essential circuits, 24 hour supply
•Mains breakers for control panels, davit winches, or treatment systems
•Heavy duty breakers for anchor winches
•Powder coated aluminium panel
•Spare positions for additional battery switches and circuit breakers for extras such as radio batteries and genset batteries
-
BEP 800-MS3 Battery Management Panel
Product Code: 800-MS3
On larger boats there is normally space to recess a BatteryManagementPanel. BEP Marine has made numerous custom panels fordifferent boatmanufacturers and has seen the need to create a standardrange forcustom boat builders.
Features:
•Essential circuits, 24 hour supply
•Mains breakers for control panels, davit winches, or treatment systems
•Heavy duty breakers for anchor winches
•Powder coated aluminium panel
•Spare positions for additional battery switches and circuit breakers for extras such as radio batteries and genset batteries
-
BEP 800-MS4 Battery Management Panel
Product Code: 800-MS4
800-MS4 wiring diagram – click here to download
The 800-MS4 panel is designed for sail boats up to 14 m (46 ft) and power boats up to 10 m (32.9 ft) with single engine.
Essential circuits, 24 hour supply
Mains breakers for control panels, davit winches or treatment systems
800-MS4 is supplied with 702B negative stud
Heavy-duty breakers for anchor winches
Powder coated aluminum panel
Supplied with a full label set for panel circuit breakers - Item # SET-MSP (additional label sets available)
Spare positions for additional battery switches and circuit breakers for extras such as radio batteries and genset batteries
DIMENSIONS: 160x239x75 mm (6.3"x9.4"x2.9")
-
BEP Ammeter Shunt 0-450A – 50mv Meter Scale
Product Code: AMMETERSHUNT
Ammeter Shunt 450Amp – 50Mv Scale
Shunts are required when using both analogue and digital ammeters by wiring in series with the power suplly lines.
Dimensions: 83mm L x 45mm W x 44mm H
-
BEP Ammeter Shunt 50Aa 50mv
Product Code: AMMETERSHUNT50
Ammeter Shunt for circuits 0 – 50Amps with 50Mv Scale
-
BEP Ammeter Shunt Enclosure
Product Code: 711
BEP Ammeter Shunt Enclosure
The 711 feature modular sized contour lock mouldings, with removable side covers, ensuring your shunt installation meets ABYC standards by covering all exposed terminals.
(Shunts ordered separately)
711L - takes 2 x mini shunt or 1 maxi shunt
Dimensions: 138mm x 69mm x 50mm (H)
-
BEP BAT SW MDVS HD OPTIC 12/24V 500A MC6
Product Code: 720-MDVSO
More information coming soon.
-
BEP Battery Switch Control Panel – 1 Engine – 2 Battery Bank
Product Code: CC-802
Battery Distribution Panel for a single engine – 2 Battery Banks
DVSR conrol the power delivery to the engine and house batteries.
The BEP CC-802 offers a more modern, flush mounted switch panel versus the standard BEP 716 clusterThe CC-802 is supplied loosely assembled with links and joiners to allow it to be assembled in either the square or horizontal orientations
- Dual connection for both the engine and house batteries are connected
- DVSR
- Easy flush panel mount
- Mutiple layout – square or horizontal orientation
-
BEP Bilge Alarm Module with Switch
Product Code: 900-BA
BEP 900-BA Bilge alarm and bilge pump control panel includes 1 x on/ off/on switch for auto manual control, plus 1 x warning light and alarm for high water level alarm. (Float switch ordered separately)
The MICRO range offers the unique ability to select the size & orientation of
switch panels by adding the compact modules together horizontally or vertically.
• Labels backlit with green LED changing to red when switch is on
• Full range of text or graphical labels available
• Mix’n’match LED’s and switches to suit your requirements
• Available in charcoal or white
• Dimensions 86H x 58W x 28mm D (3.4H x 2.3W x 1.2D inches) -
BEP Bus Bar – 12 Way
Product Code: BB-12W
BEP Bus Bar - 12 Way
Dimensions:
177 x 15 x 29 mm
Features:
* 12 x 4mm (5/32") stainless steel screws with shake proof washers.
* 2 x 6mm (1/4") input studs
* 100A current rated
* Tin plated Brass
* Insulated mounting base with recessed mounting holes avoids accidential shorting on aluminum backing plates.
Specifications:
* Voltage Rating: 300 Volts AC Max & 48 Volts DC Max
* Bus material: Tin plated brass
* Stud material: Tin plated brass
* Screw Material: Stainless Steel
* Base material: Flame retardant plastic -
BEP Bus Bar – 6 Way
Product Code: BB-6W
BEP Bus Bar - 6 Way
Dimensions:
117 x 15 x 29 mmFeatures:
* 6 x 4mm (5/32") stainless steel screws with shake proof washers.
* 2 x 6mm (1/4") input studs
* 100A current rated
* Tin plated Brass
* Insulated mounting base with recessed mounting holes avoids accidential shorting on aluminum backing plates.
Specifications:
* Voltage Rating: 300 Volts AC Max & 48 Volts DC Max
* Bus material: Tin plated brass
* Stud material: Tin plated brass
* Screw Material: Stainless Steel
* Base material: Flame retardant plastic -
BEP Bus Bar 24 Way
Product Code: BB-24W-2S
Features
•4mm (5/32") stainless steel screws with shake proof washers.
•2 x 6mm (1/4") input studs
•Tin plated Brass
•Insulated mounting base with recessed mounting holes avoids accidential shorting on aluminum backing plates.
Specifications:
•Voltage Rating: 300 Volts AC Max & 48 Volts DC Max
•Bus material: Tin plated brass
•Stud material: Tin plated brass•Screw Material: Stainless Steel
-
BEP Bus Bar cover for stud MC20
Product Code: BBC-1
The Bus Bar Covers are designed to be a push fit, and to securely cover exposed studs and terminal lugs. Conforming to ABYC standards.
-
BEP C/Breaker small 50A Dual pole (CBS-50A-DP)
Product Code: CBS-50A-DP
BEP C/Breaker small 50A Dual pole (CBS-50A-DP) -
BEP Cct/Bkr small Double Pole 15A (CBS-15A-DP)
Product Code: CBS-15A-DP
BEP Cct/Bkr small Double Pole 15A (CBS-15A-DP) -
BEP Distribution Bus 300A
Product Code: 703-300A
Distribution Bus allows multiple terminations for heavy duty negative or positive connections. Modular sizing with contour lock mouldings allows easy grouping and meets ABYC standards for exposed terminals.
-
BEP Distribution Bus 500A
Product Code: 703-500A
BEP 703-500A Distribution Bus is designed to take loads from Heavy Duty Starter Circuits. Taller cover allows for more bulky cables and lugs.
-
BEP Dual Bank Control Battery Switch
Product Code: 772-DBC-EZ-BP
Innovative Dual Bank Control switch is like 3 switches in one – House, Start, and Emergency Parallel.
-
BEP Dual Battery Selector with VSR
Product Code: 714-140A-DVSR
BEP Dual Battery Selector with VSR
-
BEP Gas Detector 600-GD
Product Code: 600-GD
BEP Gas Control Panel with detection and alarm.
-
BEP Gas Detector FD-2
Product Code: FD-2
BEP Gas Detector FD-2
-
BEP Gas Detector with Built-In Sensor 600-GDRV
Product Code: 600-GDRV
The Contour Matrix Gas Detectors are the product of continuingresearch and development which BEP Marine Ltd devotes to their product range. The BEP Detectors use microprocessor control to ensure correct sensor sensitivity. The Detectors have the capability to control two sensors which detect both LPG and Petrol, with visual and audible alarms.
-
BEP Gas sensor LPG 5 metre BL-SL-L
Product Code: BL-SL-L
BEP Gas sensor LPG 5 metre
Gas sensor lead with a 5 meter lead. Fits 600-GD, 600-GDL, 600GDRV and FD-2
