Standard 2m Gullsweep
* Eliminate cleaning time & unsightly stains
* Easy to install (2 screws) or quick non-permanent mountings are avalable.
* Doesn't require any on board power
* Works while you are away
Standard 2m Gullsweep
* Eliminate cleaning time & unsightly stains
* Easy to install (2 screws) or quick non-permanent mountings are avalable.
* Doesn't require any on board power
* Works while you are away
Grommet - Steering Cable Rubber Cone
Bulkhead boot for electrical cables, pipes and steering systems
A: 11mm, B: 109mm, C: 103mm, D: 69mm, E: 5mm
15° Splashwell Mounting Kit
Add this kit to make the splashwell the point at which the push-pull cable is mounted. Includes threaded tube, splashwell guard and mounting hardware.
* Ball and socket motion aligns the steering cable automatically
* Corrosion-resistant stainless and aluminium construction
Well stainless Gland Diameter: 78mm
Compatable with TELFEX SA27254
A commerical grade adapter ( R4 ) to connect our ST150H-18 or ST350H-25 systems to a F30 - F70 Yamaha outboard.
Also use this to suit Yamaha 90hp 2stroke.
Steering Wheel
13" Diameter
Durable Black Plastic
Steering Wheel
350mm Diameter
Stereo Cover
A small hatch specifically for covering your stereo headunit from the elements
Dimensions:
Outside: 239mm x 113mm
Inside: 192mm x 62mm
Also available in White part number 4636W
Stoltz Keel Roller RP-8
Replacement roller for trailer keel roller assembly
* Guaranteed to outlast any other roller on the market
* NEW U.V. stabilised formula
* Polyurethane construction offers superior cut and abrasion
resistance
* Extremely cut resistant
* Made in the USA
Dimensions
Length: 203mm (8”)
15mm shaft (5/8”)
Small Narrow Hatch with Box
White coloured hatch
Top Line 180° Opening
Smooth rolling wheel offers substantial cushioning around the ends of the marina berth.
Maxi Standard Stress Free Drum Winch
NG Series Midi 50 Drum Winch with Free Fall
Midi Standard Stress Free Drum Winch
Stress free anchor retrieval from this compact winch.
* Suitable for boats from 6 – 7 metres
* Fits neatly into the anchor well
* The motor can be mounted at 30, 45 and 90 degrees to suit the configuration of the anchor well
* 1400 watt motor
* Constructed from 316 marine grade stainless steel
* Maximum lifting capacity 250 kilos (when the drum diameter is small)
* Holding capacity at anchor is 1800 kilos
* Rated to 135 amps
* Normal running the Stress Free will use 25 – 30 amps and under load up to 55 amps
* To protect the motor, the circuit breaker will trip out if there is a power overload (for example if the anchor is stuck on the bottom)
* Recommend dual batteries with the battery switch on BOTH
* Can be deck mounted
Drum capacity
• 85 metres of 10mm nylon plus 8 metres of 8mm chain OR
• 110 metres of 8mm nylon plus 8 metres of 8mm chain OR
• 200 metres of 6mm double braid eye spliced to 5 metres of 8mm nylon and 8 metres of 8mm short link chain
The gearbox mounting holes in the mounting bracket allow the motor and drive to be installed at 4 angles to suit different anchor well configurations. Another 8 adjustment angles are available at 30º and 45º from each of the basic 4 mounting holes.
Mighty Standard Stress Free Drum Winch
NG Series Mighty Standard Stress Free Drum Winch with Free Fall
NG Series Mini Standard Stress Free Drum Winch with Freefall
Mini Standard Stress Free Drum Winch
Stress free anchor retrieval from this compact winch.
•Suitable for boats from 4 – 6 metres
•Fits neatly into the anchor well
•The motor can be mounted at 30, 45 and 90 degrees to suit the configuration of the anchor well
Why Stressfree?
Heavy Duty Pot Hauler
Designed to lift craypots, crab pots and long lines with minimal effort. The collapsible frame folds down in seconds for easy storage. Minimal effort required to lift either craypots, crab pots or long lines – just sleeve the unit into a straight rod holder – plug in the power source and you are ready for action.
LED Strip Light with lenticular cover. These surface mount LED Utility Strip Lights are great for lighting or decorating interior and exterior of boats, RVs and other vehicles. Being 100% waterproof, they are suitable for underwater applications just below the waterline.
Kit Liberty Stripper Assembly - 8mm
SUPER LOUD AIR HORN – Sounds like a truck but designed for the marine environment
6 Gang - Fused Switch Panel
6 Way switch panel with blue LED’s
Dimensions: 180mm x 68mm
3 way switch panel with blue LED’s.
This 4 gang rocker toggle switch panel with double USB ports and Cigarette Lighter / Power Socket is great for wiring a range of gadgets that can easily be controlled from one panel.
This 6 gang rocker toggle switch panel with Voltage Meter, double USB ports and Cigarette Lighter / Power Socket is great for wiring a range of gadgets that can easily be controlled from one panel.
146 mm long Solid 316 Marine Stainless Hook
Marine grade large hook with integrated swivel eyelet.
Hook includes a spring loaded locking clevis so as to prevent the rope or chain being dislodged.
T-Piece Tube Joiner for Spray Nozzles
Suits 6mm OD/4mm ID hose.
Easy way to change towball sizes!
Easy way to change towball sizes!
Table Pedestal Complete with Aluminium Base and Top
Includes:
54019 - Chromed steel pedestal Leg - 710mm long
54017 - Aluminium Table Top Mount or Base Mount for surface mounting
54018 - Aluminium pedestal flush mount base for floor mounting
Dimensions
Pedestal Height: 710
Pedestal tube diameter 60mm
Height from floor to underside of table 690mm
Depth Underfloor with flush mount: 50mm
Base diameter: 157mm
Table Mount diameter: 165mm
The Tank Fitting Tube is used as an overflow check valve or tank pickup. The angled end can be cut to suit different sized holding tanks.
Rugged composite clip with heavy-duty spring and bungee cord
Ingenious design grips tarps and sheeting tight without the need to locate rope eyes
The tighter the clip is pulled the tighter it grips
Simple to release
Suitable for use on boats, trucks, trailers, farm and garden.
Blister Pack.
Dual-function control — each lever controls throttle AND shift. Virtually all single-station outboards and stern drives with mechanical transmissions. Single lever, dual action design controls throttle and shift with one lever. (Mounts to gunwale surface — no hole cutout required.) It’s an excellent replacement for both outboard and stern drive controls using universal (3300/33C type) cables only.
Plastimo’s Telescopic Danbuoys are manufactured to IOR requirements for all offshore use. This rigid model is composed of a telescopic pole with 2 x floatation buoys, neon orange flag, 8m floating rope.
Ergonomic design and superior stability.
Plastic recessed drink holder with Drain (10mm hosetail )
Available in Black only
Dimensions:
Cut out diameter: 95mm
Overall diameter: 110mm
Depth: 90mm
Thetford toilets are a fully self-contained toilet system that can be built into the bathroom of caravans, motorhomes, narrow boats or any type of recreational vehicle.
Thetford Grey Water Fresh Concentrate is a strong, concentrated, effective fluid that prevents smells from waste-water tanks, showers, sinks or basins of your caravan, boat, portable home or motor home drains.
Thetford Toilet C400 Cassette Door. Door ONLY. For use with the Thetford C400 Cassette Toilet, part number 2055.
Throttle & Shift Control Levers
Chrome Plated Brass
The length of the lever arms are 165mm and 200mm.
Side Mount Single lever control
Speich Thru Bulkhead Fitting for Wiper Washer Hose
Goes through up to 40mm Bulkhead.
10mm Drilling Hole
Suits 6mm OD/4mm ID hose.
Stainless Steel & Chrome Parts
Thru-Hull Scupper valve for Inflatable boats
Large Ø68mm diameter outlet forfast evacutaion of water
Non-return valve
Bow Roller with guides
Suitable as a thru-mount boat anchor roller
Marine Grade 316 Stainless Steel
N08 - Dimensions:
A) 55mm B) 75mm C) 155mm D) 16mm
Overall width: 162mm
TMC Bilge Pump
1000 gph = 3,785 l/hr
12 Volt
1" Outlet (26.5mm)
Current: 5A
Fuse size: 7A
Delivery Head: 4m (13ft)
Dimensions (L x W x H): 108.7mm x 82mm x 126.7mm
TMC Bilge Pump
2000 gph = 7,570 l/hr
12 Volt
1 1/8" Outlet (28mm)
Delivery Head: 4m
Current: 10A (Use 15A fuse)
TMC Bilge Pump
3000 gph = 11,356 l/hr
12 Volt
1 1/4" Outlet (32mm)
Delivery Head: 4.6m
Current: 18A (Use 20A fuse)
TMC Bilge Pump
500 gph = 1,890 l/hr
12 Volt
3/4" Outlet (20mm)
Current: 2.5A
Fuse size: 4A
Delivery Head: 3m (10ft)
Dimensions (L x W x H): 80.5mm x 73.5mm x 94.5mm
Self Priming Water Circulation Pump
TMC In Line Blower 4" 12V
TMC Pantograph Wiper Arm
Includes Pantograph mounting bracket 4609 (See attached image)
Dual Arm with 7mm Bayonet fitting
Length can be adjusted from 398-475mm
Shaft Ø14mm - Hole Ø16mm
TMC Repair Kit for TMC Manual Toilets
TMC Service Kit for Manual Toilets 99901 99903 99905 99913
TMC Toilet Part No.15 Elbow
Refer to exploded view diagram here for placement on toilet.
TMC Toilet Part No.18 Centrifugal Impeller
Refer to exploded view diagram here for placement on toilet.
TMC Toilet Part No.19 Macerator Housing
Refer to exploded view diagram here for placement on toilet.
TMC Toilet Part No.20 & 20-1 Chopper Blade Set
Refer to exploded view diagram here for placement on toilet.
TMC Toilet Part No.21 Gasket
Refer to exploded view diagram here for placement on toilet.
TMC Toilet Part No.24 Discharge Ports
2 x ports supplied
1 x 90 degree
1 x 15 degree offset for straight connection applications
Refer to exploded view diagram here for placement on toilet.
TMC Toilet Part No.25 Adaptor
used for connecting 38mm hose to 25mm hose
Refer to exploded view diagram here for placement on toilet.
TMC Toilet Part No.25-1 Adaptor Smaller Size
Used for connecting 25mm hose to 15mm hose
Refer to exploded view diagram here for placement on toilet.
TMC Toilet Part No.27 Body (Pump)
Refer to exploded view diagram here for placement on toilet.
TMC Toilet Part No.28 Gasket
Refer to exploded view diagram here for placement on toilet.
TMC Toilet Part No.29 - Impeller Flexible
Toilet Exploded View - Download
TMC Toilet Part No.44 Base Packing Gasket
Refer to exploded view diagram here for placement on toilet.
TMC Toilet Part No.64 Elbow
Refer to exploded view diagram here for placement on toilet.
Standard Soft Close Seat/Cover for TMC Marine Toilet Models 99901, 99902, 99905 and 99909.
TMC toilet part - Momentary Switch Assembly complete with fuse holder.
Toilet Flush Controller
This controller utilises a built in micro IC control system to allow two flush options; a half flush lasting 5 seconds to deliver 2 litres of water, and a full flush lasting 10 seconds to deliver 4 litres of water.
Chaffing Protection Grommet
Ocal Shaped potection grommet for outboard steering cables through boat transoms.
Dimensions:
External: 89mm (h) x 134mm (w) X 60 (d)
Internal: 50 x 100mm