maXtek manual hand pump
Easy bench mounting.with built-in check valve and water spout
Chrome-Plated die cast top with plastic body
Built-in one way valve prevents water back flow.
This pump is self-priming and will draw water from you your tank
Pumps 60 GPH (230LPH)
9mm (3/8") I.D. hose connection
45mm dia cut-out required to fit
Caravan hand Pump
Galley Pump
Sink Pump
Premium TMC single diaphram self-priming hand pump with two position handle
The 714-140A-DVSR uses our new dual sensing 12 & 24 Volt VSR (710-140A). A welcome addition to the 701 selector switch it ensures you will always have a fully charged reserve battery. When the switch is in position 1 it becomes the sensing battery for the VSR. Battery 2 which is in isolation will be charged via the VSR when the engine is running ensuring it is always fully charged. When the switch is in battery 2 position this becomes the sensing battery and battery 1 is charged via the VSR. The fact that there is always a fully charged battery in reserve is a huge safety factor.
Dimensions: 138L x 69W x 75H mm
Single Cyn. Manual re Arm Kit
Manual Re-arm Kit (Adult's Lifejacket 33g CO2) - Single.
LED Navigation Light for mounting on the bow deck of your boat.
Weight: 160g
Blister Pack.
Meeting the latest regulations:
Weight: 95g
Blister Pack.
Meeting the latest regulations:
FOS LED 12 & 20 All-Round light 360o
Weight: 95g each
Blister Pack.
Meeting the latest regulations:
Weight: 150g
Blister Pack.
Meeting the latest regulations:
FOS LED 12 Masthead light 225o
FOS LED 12 Stern light side mount 135o with white housing. FOS LED series of navigation lights are designed to save power on board and offer reliability, efficiency and visibility at sea. Led technology provides supreme efficiency with up to 80% less power compared to conventional bulbs.
Label sheet (14 labels) For 700, 701, 720 & 721 switches
One set of Port & Starboard Navigation Lights
FOS LED 12
LED Bulb - 12V Bayonet All Round light bulb
36 Cool White LEDs per "bulb"
Offset Pins
Dual contacts on base
Light Voltage Range DC 10.5V-15.8V
Low heat output, low power consumption
Works wit
LED Bulb - 12V Bayonet All Round light bulb
18 Cool White LEDs per "bulb"
Parallel Pins
Single contact on base
Light Voltage Range DC 10.5V-15.8V
Low heat output, low power consumption
Works
LED Bulb - Festoon 39mm
4 cool white LEDs on each side (total 8 leds per bulb) creates a 360 degree light.
Light Voltage Range DC 10.5V-15.8V
Low heat output, low power consumption
Installation:
* After
Safety Harness with high visibility.
Twin Hook Elastic MOB Tether
Triple Hook Safety Line
Double action hook design prevents accidental opening whilst still offering superb single handed operation. The hook is fully approved to ISO 12401
Dimensions: 200cm (l) .
Twin Hook Life Jacket Tether
BEP Ammeter Shunt Enclosure
The 711 feature modular sized contour lock mouldings, with removable side covers, ensuring your shunt installation meets ABYC standards by covering all exposed terminals.
(Shunts ordered separately)
711L - takes 2 x mini shunt or 1 maxi shunt
Dimensions: 138mm x 69mm x 50mm (H)
Safety Rope Ladder
This compact 4-step telescopic cassette ladder is built for easy access and safe boarding in confined spaces. Designed with durable stainless steel construction, it smoothly slides in and out of its cassette housing for quick deployment and secure storage. Integrated handles provide added stability and grip when climbing or descending.
A durable and space-saving ladder designed for easy boarding from the water. This 4-step under-transom mount ladder features a sturdy handle for secure grip and stability. Ideal for boats where transom space is limited, it folds neatly away when not in use and provides safe, reliable access on and off the vessel.
3 Step SS Under Transom Ladder
Quality made stainless boarding ladder
~ Marine grade 316 stainless steel construction
~ Rubber moulded for comfort
~ Non slip
~ Stainless steel
~ Velcro strap for securing steps in
folded position
~ Ladder slides out from closed position
Designed to be mounted on the underside of a transom as per illustration
Dimensions
MOUNTING FEET
OA width of ladder incl base - 294mm
OA length incl mounting base - 375mm
Mounting Base Length OA - 300mm
Step width - 222mm
Ladder fully extended - 875mm
Height below transom - 67mm
2 + 1 Step Marine Grade Stainless Steel Ladder
Quality made stainless boarding ladder.
This ladder comes with a mounting kit which allows you to either permanent mount or clip on and off.
Upper mounting bracket can be secured on a vertical or horizontal surface. ideal for side or transom mounting on smaller boats
~ Removable or Permanent mounting kit
~ Rubber moulded for comfort
~ Non slip
~ Marine grade stainless steel
~ Securing bracket for fold down step
Dimensions
OA width of ladder - 236mm
OA width of mounting step - 178mm
Fully Folded / Retracted Length OA - 315mm
Ladder fully extended OA Length - 540mm
Ladder SS - 4 Step Telescopic
Very solidly built ladder.
Make reboarding after swimming off your boat easier.
* Rubber moulded Non slip steps for comfort
* Velcro strap for securing steps in folded position
Made from marine grade stainless steel
Dimensions:
OA width of ladder incl mounts: 318mm
OA length of mounting feet: 165mm
Fully Retracted Length: 400mm
Fully extended Length: 1145mm
Internal step width: 215mm to 235mm
Deluxe White Glove Box with drink holders and Lock
Practical and extremely useful addition to any boat or motorhome
This convenient glove box can easily retrofitted to your boat
Made of ABS with a Non Magnetic Marine Lock
Two external drink holders take care of your favourite beverage in rough seas or on rocky roads.
Overall Dimensions: 343mm (L) x 140mm (H) x 190mm (D)
Inside: 318 (L) x 102 (H) x 65 (D)
Cut out 105mmx 300mm
Glove Box with Lock
Practical and extremely useful addition to any boat or motorhome
This convenient glove box can easily retrofitted to your boat
Made of ABS with a Non Magnetic Marine Lock
Two external drink holders take care of your favourite beverage in rough seas or on rocky roads.
Overall Dimensions: 343mm (L) x 140mm (H) x 190mm (D)
Inside: 318 (L) x 102 (H) x 160 (D)
Cut out 105mmx 300mm
Glove Box with Lock
Practical and extremely useful addition to any boat or motorhome
This convenient glove box can easily retrofitted to your boat
Made of ABS with a Non Magnetic Marine Lock
Overall Dimensions: 343mm (L) x 140mm (H) x 190mm (D)
Inside: 318 (L) x 102 (H) x 65 (D)
Cut out 105mmx 300mm
The DVSR (Digital Voltage Sensing Relay) allows charging of two independent battery banks from a single charging source. When the voltage on the start battery rises to a charged level, the DVSR engages allowing the 2nd battery to charge. When charging stops and voltage falls, the DVSR will disengage, isolating the two batteries from each other.
Hatch Insect Screen
Hatch Insect Screen
