-
BEP Isolated Double Pole 400A battery Switch – MC10
Product Code: 770-DP-EZ-B
Double Pole On/Off switch that isolates both the positive and negative battery terminals
Most commonly used on metal hulled craft, full isolation ensures there is no risk of stray currents that may cause galvanic corrosion, and also guarantees optimum safety during servicing. -
BEP Insulated twin stud, 6mm Black
Product Code: IS-6MM-2
BEP Insulated twin stud, 6mm Black
6mm tinned copper stud with high temperature plastic base
Dimensions: 42.25mm (L) x 36mm (W) x 31mm (H)
25.5mm stud centres
24mm fixing hole centres -
BEP Insulated twin stud linked, 10mm Black
Product Code: IS-10MM-2L
BEP Insulated twin stud linked, 10mm Black
10mm tinned copper stud with high temperature plastic base
Dimensions: 42.25mm (L) x 36mm (W) x 31mm (H)
25.5mm stud centres
36mm fixing hole centres -
BEP Insulated twin stud 6mm Black with cover
Product Code: IS-6MM-2/DSP
BEP Insulated twin stud, 6mm Black with cover
6mm tinned copper stud with high temperature plastic base
Dimensions: 42.25mm (L) x 36mm (W) x 31mm (H)
25.5mm stud centres
24mm fixing hole centres -
BEP Insulated Studs With Cover
Product Code: 704-4S
The 704-4S was designed for multiple heavy duty connections which need to be isolated from each other. This model completes the range of heavy duty connectors and meets ABYC standards for exposed terminals.
-
BEP Insulated stud cover
Stud covers push securely over the threaded stud covering to ABYC standards
To suit 10mm studs
Red or Black colour option -
BEP Insulated Stud Cover – Dual 6mm (IS-6mm-2), black
Product Code: ISC-6-2
BEP Insulated Stud Cover - Dual 6mm (IS-6mm-2), black -
BEP Insulated Stud Cover – Dual 6mm (IS-6mm-2) Red
Product Code: ISC-6-2R
BEP Insulated Stud Cover - Dual 6mm (IS-6mm-2) Red -
8mm tinned copper stud with high temperature plastic base
-
6mm tinned copper stud with high temperature plastic base
-
10mm tinned copper stud with high temperature plastic base
-
BEP Heavy Duty ANL Fuse Holder
Product Code: 704-ANL
Allows fusing of heavy duty accessories between 80-500 Amp.
Mounted in Contour lock mouldings with removable sides.
Meets ABYC Standards for exposed terminals. -
BEP Heavy Duty 650A 8 Way Bus Bar
Product Code: 777-BB8S-650
Marinco Pro Installer 650 Amp bus bar designed for flexibility and scalability.
Snap-out side skirts allow for additional cable entry, and radius ends improve cable routing options. It is easy to link other Pro Installer products to the bus bars because of the common interconnection height in the product line. -
BEP Gas Shut Off Switch 600-LPG
Product Code: 600-LPG
BEP Gas Shut off Switch
Stand alone On/Off control of gas solenoid valve
This panel does not have gas detection capability. -
BEP Gas sensor LPG 5 metre BL-SL-L
Product Code: BL-SL-L
BEP Gas sensor LPG 5 metre
Gas sensor lead with a 5 meter lead. Fits 600-GD, 600-GDL, 600GDRV and FD-2
-
BEP Gas Detector with Built-In Sensor 600-GDRV
Product Code: 600-GDRV
The Contour Matrix Gas Detectors are the product of continuingresearch and development which BEP Marine Ltd devotes to their product range. The BEP Detectors use microprocessor control to ensure correct sensor sensitivity. The Detectors have the capability to control two sensors which detect both LPG and Petrol, with visual and audible alarms.
-
BEP Gas Detector FD-2
Product Code: FD-2
The FD-2 is designed for an economic in-dash installation. Features include clearly visible LED for safe and alarm mode, and audible alarm with test function. Supplied with sensor (5 metre cable) which is capable of detecting combustible gases.
-
BEP Gas Detector 600-GD
Product Code: 600-GD
BEP Gas Control Panel with detection and alarm.
-
BEP Dual Battery Selector with VSR
Product Code: 714-140A-DVSR
The 714-140A-DVSR uses our new dual sensing 12 & 24 Volt VSR (710-140A). A welcome addition to the 701 selector switch it ensures you will always have a fully charged reserve battery. When the switch is in position 1 it becomes the sensing battery for the VSR. Battery 2 which is in isolation will be charged via the VSR when the engine is running ensuring it is always fully charged. When the switch is in battery 2 position this becomes the sensing battery and battery 1 is charged via the VSR. The fact that there is always a fully charged battery in reserve is a huge safety factor.
Dimensions: 138L x 69W x 75H mm -
BEP Dual Bank Control Battery Switch
Product Code: 772-DBC-EZ-BP
Innovative Dual Bank Control switch is like 3 switches in one – House, Start, and Emergency Parallel.
-
BEP Distribution Bus 500A
Product Code: 703-500A
BEP 703-500A Distribution Bus is designed to take loads from Heavy Duty Starter Circuits. Taller cover allows for more bulky cables and lugs.
-
BEP Distribution Bus 300A
Product Code: 703-300A
Distribution Bus allows multiple terminations for heavy duty negative or positive connections. Modular sizing with contour lock mouldings allows easy grouping and meets ABYC standards for exposed terminals.
-
BEP Cct/Bkr small Double Pole 15A (CBS-15A-DP)
Product Code: CBS-15A-DP
BEP Cct/Bkr small Double Pole 15A (CBS-15A-DP) -
BEP C/Breaker small 50A Dual pole (CBS-50A-DP)
Product Code: CBS-50A-DP
BEP C/Breaker small 50A Dual pole (CBS-50A-DP) -
BEP Bus Bar cover for stud MC20
Product Code: BBC-1
The Bus Bar Covers are designed to be a push fit, and to securely cover exposed studs and terminal lugs. Conforming to ABYC standards.
-
BEP Bus Bar 24 Way
Product Code: BB-24W-2S
Features
•4mm (5/32") stainless steel screws with shake proof washers.
•2 x 6mm (1/4") input studs
•Tin plated Brass
•Insulated mounting base with recessed mounting holes avoids accidential shorting on aluminum backing plates.
Specifications:
•Voltage Rating: 300 Volts AC Max & 48 Volts DC Max
•Bus material: Tin plated brass
•Stud material: Tin plated brass•Screw Material: Stainless Steel
-
BEP Bus Bar – 6 Way
Product Code: BB-6W
BEP Bus Bar - 6 Way
Dimensions:
117 x 15 x 29 mm -
BEP Bus Bar – 12 Way
Product Code: BB-12W
BEP Bus Bar - 12 Way
Dimensions:
177 x 15 x 29 mm
Features:
* 12 x 4mm (5/32") stainless steel screws with shake proof washers.
* 2 x 6mm (1/4") input studs
* 100A current rated
* Tin plated Brass
* Insulated mounting base with recessed mounting holes avoids accidential shorting on aluminum backing plates.
Specifications:
* Voltage Rating: 300 Volts AC Max & 48 Volts DC Max
* Bus material: Tin plated brass
* Stud material: Tin plated brass
* Screw Material: Stainless Steel
* Base material: Flame retardant plastic -
BEP Bilge Alarm Module with Switch
Product Code: 900-BA
BEP 900-BA Bilge alarm and bilge pump control panel includes 1 x on/ off/on switch for auto manual control, plus 1 x warning light and alarm for high water level alarm. (Float switch ordered separately)
-
BEP Battery Switch Control Panel – 1 Engine – 2 Battery Bank
Product Code: CC-802
Battery Distribution Panel for a single engine – 2 Battery Banks
DVSR conrol the power delivery to the engine and house batteries.
The BEP CC-802 offers a more modern, flush mounted switch panel versus the standard BEP 716 clusterThe CC-802 is supplied loosely assembled with links and joiners to allow it to be assembled in either the square or horizontal orientations
- Dual connection for both the engine and house batteries are connected
- DVSR
- Easy flush panel mount
- Mutiple layout – square or horizontal orientation
-
BEP BAT SW MDVS HD OPTIC 12/24V 500A MC6
Product Code: 720-MDVSO
More information coming soon.
-
BEP Ammeter Shunt Enclosure
Product Code: 711
BEP Ammeter Shunt Enclosure
The 711 feature modular sized contour lock mouldings, with removable side covers, ensuring your shunt installation meets ABYC standards by covering all exposed terminals.
(Shunts ordered separately)
711L - takes 2 x mini shunt or 1 maxi shunt
Dimensions: 138mm x 69mm x 50mm (H)
