Manufactured from high quality stainless steel 316, these closed body turnbuckles, also known as rigging screws, tensioners or bottlescrews.
-
Manufactured from high quality stainless steel 316, these closed body turnbuckles, also known as rigging screws, tensioners or bottlescrews. Frame type with hook and eye end.
-
Turnbuckle Hook – Hook
Product Code: K080
Manufactured from high quality stainless steel 316, these closed body turnbuckles, also known as rigging screws, tensioners or bottlescrews. Frame type with hook's on both ends
-
Manufactured from high quality stainless steel 316, these closed body turnbuckles, also known as rigging screws, tensioners or bottlescrews.
-
Twin Burner Gas Hob
Product Code: 1336
Flush Fitting Twin Burner Gas Hob Rectangular gas hob-unit 2 burners complete with tempered smoked glass lid, with burners with self-blocking flame lid, s/s built-in support grid fixed with anti-vibration rubber-washers and disappearing hinge.
-
Twin Engine Control – Dual Action
Product Code: 60062
Top Mount Controls
-
Twin Hook Safety Lanyard – 1.85m
Product Code: 71148
Twin Hook Life Jacket Tether Approved to EN 1095. Their double action hook design prevents accidental opening whilst still offering superb single handed operation. The hook is also fully approved to EN 362. Length: 185 cm -
Twin Lever Mechanical Control Levers
Product Code: 60058
Twin Engine Control Levers for Top mounting. Suitable for boats requiring either two throttles or clutches on a twin engine, or one clutch and one throttle on a single engine. Standard 33C cable control for throttle or gears.
-
Twin Pan Holders for Italian Cookers
Product Code: PV1371
Round Pan holder for Italian gas cookers
-
Twin White Sheath Cable 1mm (CAB TW1.5WS)
Product Code: CAB TW1.5WS
Twin White Sheath Cable 1mm (CAB TW1.5WS) -
Twin White Sheath Cable 2.5mm (CAB TW2.5WS)
Product Code: CAB TW2.5WS
Twin White Sheath Cable 2.5mm (CAB TW2.5WS) -
Twin White Sheath Cable 2mm (CAB TW2.0WS)
Product Code: CAB TW2.0WS
Twin White Sheath Cable 2mm (CAB TW2.0WS) -
Stainless steel 316 twist shackle is usually somewhat longer than the average and features a 90deg twist so the top of the loop is perpendicular to the pin. They are designed for application where a more secure tightening pin is required. Excellent used in a shade sail design, combined with a thimble dee ring onto oblong eye plate.
-
These stainless steel 316 U Bolt with washer and nuts maybe used where an eyebolt would be too small or to go over tubing e.g. deckware
-
U Dot Light Grey (57265) 2050x1025x3mm
Product Code: 57265
Marine Deck Tread- Ultralon
-
Underwater Viewer – Aquascope – Bathyscope
Product Code: 0800
The Marine Aquascope for discovering the underwater world! Look through the multi fit mask from the comfort of your boat. View the bottom and see if its good fishing.
-
Universal In-Line Fuel Filter
Product Code: 2072-BP
High Quality Glass in line Fuel filter supplied with connections for 6mm, 8mm and 10mm fuel hoses.
-
Universal Seat Slider – with swivel
Product Code: 50108
Convert your existing marine seat into an adjustable sliding and swiveling seat. With universal mounting holes this can easily be installed on to a fixed pedestal or mounting frame.
-
USB Double port Socket and Voltmeter Panel Mount
Product Code: PS-2020
Marine terminal socket for plugging in auxilary USB powered product
USB Double port Socket and Voltmeter Panel Mount
- 12-24 DC 5V, 3.1A DC Total
- Watertight cap
- 5V -30V Voltmeter Socket
-
USB Double ports Socket
Product Code: PS-2018
Waterproof Marine terminal socket for plugging in auxiliary USB powered product
USB Double Port Socket- 12-24 DC
- Keep water out with watertight cap
- 5V 31.A
- Flush fitting for panel mount
-
USB Dual Charger and Cig Socket
Product Code: PS-2019
Marinco Deluxe Dual USB Charger and 12V Receptacle
-
USB Dual Charger and Cig Socket – Black
Product Code: PS-2019B
Deluxe Dual USB Charger and 12V Cigarette Socket – Black
-
USB Dual Charger with Waterproof Cap
Product Code: PS-10120
Marine flush Mounted terminal socket for plugging in auxilary USB powered product
- Weather Sealing cap
- Panel mount – Standard Rectanglar switch replacement
- Material: Plastic, Black
- Voltage: 6-30 VDC
- Port: Dual port
- Amp: 3.1 Amps
Dimensions
49mm (h) x 25mm (w) x 51mm (d) -
Utility Plastic Box
Product Code: 4632W
Utility Plastic Box - White External Dimensions: 118mm(H) x 245mm(W) x 182mm(D) Cut Out: 83mm (H) x 213mm (W) x 167mm (D) -
Tru Designs Aquavent® has been designed and manufactured in New Zealand for use in Marine applications.
Vented loops are commonly used for inlet and discharge pipes on toilet installations below the water line. Our Aquavent is moulded in a glass reinforced nylon composite, with a silicon bleed valve. The bleed valve allows air into the system to stop syphoning yet seals effectively when water or fluid pass through.
The advantage with our vented loops over others, is that the internal diameter is the same throughout the bend - meaning there is no restriction.
The Aquavent can be used as a holding tank vent by replacing the bleed valve fitting with a tube that is connected to a deck level vent.
-
VETUS Aluminium bow thruster panel square
Product Code: BPAJ
Upgrade your helm station with the Vetus Square Aluminium Bow Thruster Panel, combining a sleek, heavy-duty metallic finish with intuitive control for precise docking maneuvers.
-
Design & Aesthetics: Features a robust square anodized aluminum faceplate designed to deliver a modern, premium look that coordinates with high-end helm electronics.
-
Precision Control: Provides smooth, reliable activation for Vetus bow and stern thrusters, incorporating safety features to prevent accidental continuous operation.
-
Durability & Protection: Built specifically for marine environments using corrosion-resistant materials and waterproof sealing to handle harsh sea spray and salt air.
-
Installation: Engineered for a clean flush-mount installation on both 12V and 24V electrical systems using standard multi-station wiring configurations.
-
-
Vetus Anti Siphon Device with Valve 13-32mm hose
Product Code: ASDV
Vetus anti siphon valve check
-
VETUS Bow Thruster connection cable 10m
Product Code: BP2910
Connect your helm station effortlessly using the Vetus 10-metre Bow Thruster Connection Cable, pre-fitted with multi-plugs for easy instalation.-
Universal Compatibility: Engineered for seamless use with all VETUS electric bow and stern thrusters as well as single-stage hydraulic control systems.
-
Plug-and-Play Design: Factory-fitted with multi-plugs on both ends to eliminate wiring guesswork and ensure reliable signal transmission.
-
Marine Durability: Built with high-grade shielding and weather-resistant insulation to withstand moisture, vibration, and harsh marine environments.
-
-
Vetus Bow Thruster Panel
Product Code: BPJE2
Equip your helm with the Vetus Standard Bow Thruster Control Panel, featuring a robust joystick design and an integrated time-lapse safety device to protect your system during quick directional changes.
-
Precision Control: Equipped with a responsive joystick interface for intuitive single-axis or multi-station bow and stern thruster operation.
-
Safety & Protection: Features a built-in time delay mechanism for directional reversals, preventing sudden gear shock and motor damage.
-
Durability: Built to withstand harsh marine conditions with an IP66 watertight front rating and IP65 ignition protection.
-
Installation: Designed for a flush dash mount requiring a 75 mm cut-out diameter and a 90 mm build-in depth.
-
-
Vetus BowPro 36kg
Product Code: BOWPRO361
Upgrade your docking experience with the revolutionary Vetus BOW PRO Thruster, delivering 36 kgf of fully-proportional thrust. Featuring a maintenance-free brushless induction motor, this unit offers endurance-rated runtime and built-in protections against over-temperature and low battery, making it ideal for boaters of all experience levels.-
Performance & Control: Delivers 36 kgf of fully proportional thrust via a 1.2 kW brushless induction motor, giving you precise, variable speed control for effortless docking.
-
Endurance & Maintenance: Features a maintenance-free brushless motor with endurance-rated run times, backed by built-in over-temperature and low-battery protection.
-
Electrical & Compatibility: Operates on 12V or 24V board systems using an in-house MCV motor controller with digital CAN bus protocol connectivity.
-
Installation & Compatibility: Built for a 125mm internal tunnel diameter with a total unit weight of 24 kg. Designed to share existing tunnel sizes for easy retrofitting.
-
-
Vetus BowPro 42kgf
Product Code: BOWPRO421
Upgrade your vessel's maneuvering with the Vetus BOW PRO 42 kgf Thruster, combining a maintenance-free brushless induction motor with fully-proportional digital control.
-
Performance & Control: Delivers 42 kgf of fully-proportional thrust via a 2.7 kW brushless induction motor, offering precise variable-speed handling and effortless docking.
-
Maintenance & Reliability: Features a carbon-brush-free design for maintenance-free operation, backed by built-in over-temperature and low-battery protection.
-
Electrical & Compatibility: Controlled by an in-house MCV motor controller using the digital V-CAN protocol, compatible with both 12V and 24V board systems.
-
Installation: Built for a compact 125 mm internal tunnel diameter with a total unit weight of 35 kg, designed to share standard tunnel sizes for straightforward retrofitting.
-
-
Vetus Cooling water Strainer 50mm
Product Code: MFTR132050
Vetus Cooling water Strainer 50mm, 2". Provided with a transparent cover - allowing for easy inspection of the filter without dismantling. Cleaning of the filter can be achieved quickly and easily.
-
VETUS COOLING WATER STRAINER TYPE 330- 19mm
Product Code: MFTR33019
VETUS COOLING WATER STRAINER TYPE 330- 19mm -
VETUS COOLING WATER STRAINER TYPE 330- 38mm
Product Code: MFTR33038
VETUS COOLING WATER STRAINER TYPE 330- 38mm -
Vetus DUAL STATION UNIT TYPE DS
Product Code: 60041
Combines the action of the single lever control from either of two command stations and provides a single output to the engine throttle lever.
-
VETUS Fuse Holder ZEHC type
Product Code: ZEHC100 FUSE HOLDER
Secure your vessel's heavy-duty electrical circuits with the Vetus C100 Fuse Holder, engineered specifically to house slow-blow fuses ranging from 40 to 500 Amps.
-
Circuit Protection: Designed to securely house Vetus "slow-blow" main fuses from 40A to 500A, protecting your bow thruster motor from dangerous overcurrent and short circuits.
-
Convenient Storage: Features a practical built-in compartment specifically designed for the secure storage of spare fuses onboard.
-
Durability & Safety: Equipped with a protective cover to shield electrical connections from accidental contact, moisture, and marine corrosion.
-
-
OUT OF STOCK
Vetus Genset 6KvA
Product Code: MGLX6.5SIC
Product Variations: Vetus Genset 6KvA -
Vetus JOYSTICK Replacement Part only
Product Code: BPJSTA
Replace a worn or damaged helm control with the Vetus Bow Thruster Joystick Replacement Part, designed for straightforward panel mounting and reliable waterproof operation.
-
Direct Replacement: Engineered specifically as a replacement joystick mechanism for panel-mounted Vetus control stations.
-
Quick Wiring: Supplied with integrated quick connectors designed to match BP29 series loom cables for a secure, plug-and-play installation (connection cable sold separately).
-
Marine Durability: Features an IP65 watertight rating to resist moisture, spray, and the harsh marine environment.
-
-
OUT OF STOCK
Vetus Oil Filter M2, M3, M4
Product Code: STM0051
Vetus Oil Filter M2, M3, M4 -
Vetus PZ671 Porthole Hatch 451 x 274 mm (oa)
Product Code: 4711
Porthole hatch (PZ671) with mosquito net
- Suitable for use in the hull side
- Satin anodized aluminum frame
- “Smoke” coloured opening pane
- Clamp fixing ensures that no fasteners are visible
- Mosquito screen is supplied
Dimensions:
Overall: 451 (l) x 274 (w)
Cut Out: 427mm x 250mm