Bow Thrusters

3 year Warranty on all VETUS bow thrusters

Easy to install – call us for expert advice on installation.
A single propeller creates less flow disturbance in a tunnel
Unique propeller blade design minimises cavitation noise
Spiral gears minimise transmission noise
Less vibration due to the use of a flexible coupling
Optimum flow due to streamlined tail piece

VETUS Strip Fuse 250A

Product Code: ZE250
$16.64 USD
Protect your high-draw marine systems with the Vetus 250A Strip Fuse, a reliable slow-blow fuse designed specifically for heavy-duty equipment like bow thrusters and windlasses.

Circuit Protection: Engineered as a 250 Amp "slow-blow" fuse to safely handle high initial startup currents without premature blowing.

Safety & Design: Encapsulated in heavy-duty glass housing to safely contain sparks and prevent fire hazards during an overload event.

Application: Ideal for protecting main DC power lines on bow thrusters, windlasses, and other high-amperage marine electrical accessories.
Add to cart
VETUS Fuse Holder ZEHC type

Product Code: ZEHC100 FUSE HOLDER
$70.60 USD
Secure your vessel's heavy-duty electrical circuits with the Vetus C100 Fuse Holder, engineered specifically to house slow-blow fuses ranging from 40 to 500 Amps.

Circuit Protection: Designed to securely house Vetus "slow-blow" main fuses from 40A to 500A, protecting your bow thruster motor from dangerous overcurrent and short circuits.

Convenient Storage: Features a practical built-in compartment specifically designed for the secure storage of spare fuses onboard.

Durability & Safety: Equipped with a protective cover to shield electrical connections from accidental contact, moisture, and marine corrosion.
Add to cart
VETUS Bow Thruster connection cable 10m

Product Code: BP2910
$105.91 USD
Connect your helm station effortlessly using the Vetus 10-metre Bow Thruster Connection Cable, pre-fitted with multi-plugs for easy instalation.

Universal Compatibility: Engineered for seamless use with all VETUS electric bow and stern thrusters as well as single-stage hydraulic control systems.

Plug-and-Play Design: Factory-fitted with multi-plugs on both ends to eliminate wiring guesswork and ensure reliable signal transmission.

Marine Durability: Built with high-grade shielding and weather-resistant insulation to withstand moisture, vibration, and harsh marine environments.
Add to cart
Vetus JOYSTICK Replacement Part only

Product Code: BPJSTA
$161.39 USD
Replace a worn or damaged helm control with the Vetus Bow Thruster Joystick Replacement Part, designed for straightforward panel mounting and reliable waterproof operation.

Direct Replacement: Engineered specifically as a replacement joystick mechanism for panel-mounted Vetus control stations.

Quick Wiring: Supplied with integrated quick connectors designed to match BP29 series loom cables for a secure, plug-and-play installation (connection cable sold separately).

Marine Durability: Features an IP65 watertight rating to resist moisture, spray, and the harsh marine environment.
Add to cart
Vetus Bow Thruster Panel

Product Code: BPJE2
$287.47 USD
Equip your helm with the Vetus Standard Bow Thruster Control Panel, featuring a robust joystick design and an integrated time-lapse safety device to protect your system during quick directional changes.

Precision Control: Equipped with a responsive joystick interface for intuitive single-axis or multi-station bow and stern thruster operation.

Safety & Protection: Features a built-in time delay mechanism for directional reversals, preventing sudden gear shock and motor damage.

Durability: Built to withstand harsh marine conditions with an IP66 watertight front rating and IP65 ignition protection.

Installation: Designed for a flush dash mount requiring a 75 mm cut-out diameter and a 90 mm build-in depth.
Add to cart
Bow Thruster Round Joystick

Product Code: BPJR
$292.52 USD
Enhance your vessel's helm station with the Vetus Round Bow Thruster Joystick Panel, engineered for precise, intuitive maneuvering during docking and tight-quarter handling.

Design & Aesthetics: Features a compact profile ( $63.5\text{ mm} \times 63.5\text{ mm}$ ) with a slim 11 mm above-dashboard height, supplied with interchangeable black, white, and chrome bezels to match your helm instruments.

Precision Control: Incorporates a built-in time-delay mechanism to safely manage directional reversals, preventing gear damage and reducing abrupt hull movements.

Durability & Protection: Built for harsh marine environments with an IP66 front-face waterproof rating to withstand spray and salt air.

Installation: Requires a 52 mm hole cut-out and an under-dash fitting depth of 89 mm, operating seamlessly on both 12V and 24V electrical systems.
Add to cart
VETUS Aluminium bow thruster panel square

Product Code: BPAJ
$317.74 USD
Upgrade your helm station with the Vetus Square Aluminium Bow Thruster Panel, combining a sleek, heavy-duty metallic finish with intuitive control for precise docking maneuvers.

Design & Aesthetics: Features a robust square anodized aluminum faceplate designed to deliver a modern, premium look that coordinates with high-end helm electronics.

Precision Control: Provides smooth, reliable activation for Vetus bow and stern thrusters, incorporating safety features to prevent accidental continuous operation.

Durability & Protection: Built specifically for marine environments using corrosion-resistant materials and waterproof sealing to handle harsh sea spray and salt air.

Installation: Engineered for a clean flush-mount installation on both 12V and 24V electrical systems using standard multi-station wiring configurations.
Add to cart
Vetus/Can Proportional Bowthruster Panel

Product Code: BPPPA
$504.34 USD
Upgrade your helm station with the Vetus Proportional Paddle Panel, engineered for precise fingertip control over your BOW PRO thruster system. Featuring a smooth paddle design, it gives you complete variable-speed command during tight-quarter docking.

Precision Control: Paddle-style interface delivers smooth, fully proportional thrust control, allowing you to instantly adjust output from a gentle nudge to full power.

Smart Integration: Fully compatible with V-CAN digital bus architecture specifically designed for Vetus BOW PRO thruster setups.

System Monitoring: Includes a built-in status indicator light for quick system feedback and supports multi-station helm installations.

Durability & Design: Built with an IP65 waterproof front housing and an attractive aluminum bezel to complement modern helm stations.

Installation: Designed for a flush dashboard fit utilizing a standard 75 mm hole cut-out.
Add to cart
Bow Thruster 25Kgf

Product Code: BOW25
$958.26 USD
Navigate tight berths and crowded marinas with total confidence using the Vetus 25kgf Bow Thruster. Engineered specifically for boats ranging from 5.5 to 8 meters, this compact 12V system features a small 110mm tunnel diameter that makes it simple to fit even into shallow-draft vessels without sacrificing raw performance.

Key Features

Delivers 25 kgf (kilogram-force) of reliable thrust

Compact 110mm tunnel diameter for easy installation in tight spaces

Optimized single 6-blade propeller design reduces cavitation and noise

Flexible drive coupling absorbs vibration and eliminates shear pins

Bronze streamlined lower leg for smooth water flow

Backed by a 3-year equipment warranty and a 5-year engine warranty
Add to cart
Bow Thruster 35Kgf

Product Code: BOW35E
$1,144.86 USD
Equip your vessel for effortless docking with the Vetus 12V bow thruster, delivering 35 kgf of reliable thrust force. Designed specifically for boats from 6.5 to 10 metres in length, this unit stands out with a compact 150mm tunnel diameter that makes installation significantly easier than competitors requiring standard 185mm units.

Key Features

Delivers 35 kgf of reliable side thrust for boats 6.5 to 10 metres

Space-saving 150mm tunnel diameter simplifies installation compared to 185mm alternatives

Single propeller design reduces flow disturbance in the tunnel

Unique propeller blade design and spiral gears minimize cavitation and transmission noise

Flexible coupling between the tail piece and motor eliminates vibration

Corrosion-resistant, lightweight synthetic propeller and durable bronze streamlined lower leg

4-minute continuous run time per hour

Fully compliant with EMC requirements and supplied with clear instructions
Add to cart
Bow Thruster 45Kgf

Product Code: BOW45
$1,613.91 USD
Take complete command in tight spaces with the high-output Vetus 12V Bow Thruster, engineered to deliver a robust 45 kgf of thrust force. Ideal for vessels ranging from 7.5 to 11.5 metres, this system features an advanced 6-blade propeller developed in partnership with MARIN to provide 9% more thrust in both directions with significantly less noise and cavitation.

Key Features

Delivers 45 kgf of reliable thrust for boats 7.5 to 11.5 metres

High-quality, high-output 12V DC motor

Advanced single 6-blade propeller design yields 9% more thrust with reduced cavitation and tunnel noise

Flexible drive coupling eliminates shear pins for smooth operation

Durable bronze streamlined lower leg

Multi-station control compatibility with simple wiring setup
Add to cart
Bow Thruster 55Kgf

Product Code: BOW55
$1,714.78 USD
Ensure effortless docking in crosswinds with the popular Vetus 12V Bow Thruster, engineered to deliver a powerful 55 kgf of thrust force. Ideal for powerboats and yachts ranging from 8.5 to 12.5 metres, this unit utilizes a space-saving 150mm tunnel diameter that makes installation significantly easier than competing 185mm models.

Key Features

Delivers 55 kgf of reliable side thrust for boats 8.5 to 12.5 metres

Compact 150mm tunnel diameter simplifies installation compared to 185mm alternatives

High-output 3 kW reversible DC motor built for long service life

Advanced single 6-blade propeller design developed with MARIN yields 9% more thrust with reduced noise and cavitation

Flexible drive coupling eliminates shear pins for smooth, vibration-free operation

Durable bronze streamlined lower leg ensures optimal water flow

Multi-station control compatibility with a simple wiring setup
Add to cart
Bow Thruster 60 Kgf 3kW 12v

Product Code: BOW60
$1,866.08 USD
Easily upgrade your vessel's handling with the Vetus 60 kgf Bow Thruster. Designed as a direct 185mm tunnel replacement for older 50 kgf units, it is ideal for boats ranging from 9 to 13 metres.

Performance & Application: Designed as a direct replacement for older 50 kgf units utilizing the same 185mm tunnel, ideal for boats 9 to 13 metres. Delivers 60 kgf of thrust via a 3 kW (4 hp) reversible DC motor.

Electrical Requirements: Operates on 12V DC with a 280 Amp current draw. Requires a 200A slow-blow main fuse, minimum $50\text{mm}^2$ battery cables for runs up to 11 metres, and a 250A battery main switch.

Battery Bank Sizing: Compatible with a minimum battery capacity of $1 \times 108\text{ Ah}$ up to a maximum of $1 \times 143\text{ Ah}$ .

Installation & Dimensions: Built for a 185mm internal tunnel diameter with a total unit weight of 22 kg (excluding tunnel) and a required tunnel depth (dimension D) between 370mm and 740mm.

Warranty & Reliability: Backed by an industry-leading 3-year warranty on equipment and a 5-year warranty on engines.
Add to cart
Vetus BowPro 36kg

Product Code: BOWPRO361
$3,026.08 USD
Upgrade your docking experience with the revolutionary Vetus BOW PRO Thruster, delivering 36 kgf of fully-proportional thrust. Featuring a maintenance-free brushless induction motor, this unit offers endurance-rated runtime and built-in protections against over-temperature and low battery, making it ideal for boaters of all experience levels.

Performance & Control: Delivers 36 kgf of fully proportional thrust via a 1.2 kW brushless induction motor, giving you precise, variable speed control for effortless docking.

Endurance & Maintenance: Features a maintenance-free brushless motor with endurance-rated run times, backed by built-in over-temperature and low-battery protection.

Electrical & Compatibility: Operates on 12V or 24V board systems using an in-house MCV motor controller with digital CAN bus protocol connectivity.

Installation & Compatibility: Built for a 125mm internal tunnel diameter with a total unit weight of 24 kg. Designed to share existing tunnel sizes for easy retrofitting.
Add to cart
Vetus BowPro 42kgf

Product Code: BOWPRO421
$3,177.38 USD
Upgrade your vessel's maneuvering with the Vetus BOW PRO 42 kgf Thruster, combining a maintenance-free brushless induction motor with fully-proportional digital control.

Performance & Control: Delivers 42 kgf of fully-proportional thrust via a 2.7 kW brushless induction motor, offering precise variable-speed handling and effortless docking.

Maintenance & Reliability: Features a carbon-brush-free design for maintenance-free operation, backed by built-in over-temperature and low-battery protection.

Electrical & Compatibility: Controlled by an in-house MCV motor controller using the digital V-CAN protocol, compatible with both 12V and 24V board systems.

Installation: Built for a compact 125 mm internal tunnel diameter with a total unit weight of 35 kg, designed to share standard tunnel sizes for straightforward retrofitting.
Add to cart