Brightest light on the market – 20% brighter than the competition
Wide angle 120 degree spread ensures your work area is illuminated.
Premium grade wide angle 120 degree spread ensures your work area is illuminated.
Bow Ladder 3 Step
316 Stainless Steel
Dimensions: 230 x 1060mm
Hatch Fastener 316 Stainless Steel
Length can be adjusted via threaded stem: 79mm to 95mm
26mm wide
Security eye for padlock in base.
The 706-4W 24hr service module consists of 1 x 5amp and 3 x 15amp push to reset Carling CLB Series thermal circuit breakers. Suitable for essential circuits such as bilge pump auto float switch supplies and stereo memory circuits. The push to reset function ensures essential 24hr circuits cannot be switched off inadvertently.
706-2W 24 hour essential circuit module. Designed for smaller systems where only 2 circuit breakers are required. Supplied with 2 x 10 amp Carling CLB Series circuit breakers – push to reset.
Allows fusing of heavy duty accessories between 80-500 Amp.
Mounted in Contour lock mouldings with removable sides.
Meets ABYC Standards for exposed terminals.
The 704-4S was designed for multiple heavy duty connections which need to be isolated from each other. This model completes the range of heavy duty connectors and meets ABYC standards for exposed terminals.
BEP 703-500A Distribution Bus is designed to take loads from Heavy Duty Starter Circuits. Taller cover allows for more bulky cables and lugs.
Distribution Bus allows multiple terminations for heavy duty negative or positive connections. Modular sizing with contour lock mouldings allows easy grouping and meets ABYC standards for exposed terminals.
The Quick Fit XF3 is a safe and reliable bike carrier for the transportation of 3 bicycles.
Tow Bar Mount – Tailgate Tilt
The latest in Quick Fit Bike Racks
Lock your cooler or fish bin firmly in place and stop it from sliding across the deck with the Maxtek Cooler Chocks Set, designed to secure your ice box safely in rough water.
Complete four-piece set with a strap to lock your cooler or fish bin securely into position
Specially designed corner clamps fit snugly around your chilly bin to prevent sliding
Quick and easy to install on your boat deck or cockpit floor
Rugged composite clip with heavy-duty spring and bungee cord
Ingenious design grips tarps and sheeting tight without the need to locate rope eyes
The tighter the clip is pulled the tighter it grips
Simple to release
Suitable for use on boats, trucks, trailers, farm and garden.
Blister Pack.
Mount a bait board securely to your vessel's rails using this convenient, adjustable rail-mounted board, designed to keep your cutting and rigging space right where you need it.
Complete setup that includes a fully adjustable rail mounting bracket
Keeps your cutting surface stable and accessible directly over the rails
Built tough to handle active fishing sessions and easy cleanup
Streamline your rigging and cutting stations with our most popular rod-mounted bait board, designed to drop straight into any standard deck rod holder for ultimate convenience.
Complete bait board package that includes a sturdy alloy mount
Fully adjustable mounting style for vertical or angled deck rod holders
Designed with two separate compartments to keep tackle, bait, and hooks organized away from your cutting surface
Easily removed and stored when not in use
Tow Bar Mounted – Quick Fit To suit longer wheelbase bikes Fully Folds away – Ideal for hatchback tail gates The latest in Quick Fit Bike Racks have been design to make it easier than ever to transport your bikes with you on your adventures.
BEP 702 Distribution Stud
The Contour Distribution Stud allows terminating of heavy duty cables for one or more connections.
Contour lock mouldings with removable side plates allow for connections from all sides.
The Contour Distribution Stud allows terminating of heavy duty cables for one or more connections.
Contour lock mouldings with removable side plates allow for connections from all sides.
The Contour Distribution Stud allows terminating of heavy duty cables for one or more connections.
Contour lock mouldings with removable side plates allow for connections from all sides.
Stud size: 10 mm (3/8 in); 69 x 69 x 50 mm (2.75 x 2.75 x 2 in}
Retro reflective tape to SOLAS (LSA Code) by Lalizas. Lengths - 1m cut from roll
Retro reflective tape to SOLAS (LSA Code) by Lalizas. Length 40m.
Lifebuoy Ring SOLAS 4kg with Reflective Tape
New in 2006 the panel mount range of battery switches are designed specifically for panel mount applications. This range gives a very compact, versatile solution with the following features..........
Features:
•Fits standard BEP battery switch label range.
•CSK recessed for surface mount application
•Standard 2 1/16" hole cut out (Same as standard gauge hole)
•Ignition Protected
•Full access for cables with no restrictions
•Fit into Contour Connect Panel
701 Specifications:
•Continuous Rating: 200 Amps DC
•Intermittent Rating: 300 Amps DC
•Cranking Rating: 1000 Amps DC
•Voltage Rating: 48 Volts DC
•Operation: 1-2-Both-Off
•Mounting: Recessed or Surface
•Ignition protected
•Termination Stud Size:
3 x 5/16"
•Dimensions: 69 x 69 x 75h mm
(2.75 x 2.75 x 3h inches)
•Tin plated copper studs and nuts
BEP 701-S Mini battery selector switch. The 701-S is the most compact selector switch available on the market. Housed in the same dimensions as the 701, and includes the same removable side plates and back cover.
New in 2006 the panel mount range of battery switches are designed specifically for panel mount applications. This range gives a very compact, versatile solution with the following features:
Features:
• Fits standard BEP battery switch label range.
• Removable key
• CSK recessed for surface mount application
• Standard 2 1/16" hole cut out (Same as standard gauge hole)
• Ignition Protected
• Full access for cables with no restrictions
• Fit into Contour Connect Panel
701 Specifications:
•Continuous Rating: 275 Amps DC
•Intermittent Rating: 455 Amps DC
•Cranking Rating: 1250 Amps DC
•Voltage Rating: 48 Volts DC
•Operation: On/Off
•Mounting: Recessed or Surface
•Ignition protected
•Termination Stud Size:
2 x 10 mm (3/8 inch)
•Dimensions: 69 x 69 x 75h mm
(2.75 x 2.75 x 3h inches)
•Tin plated copper studs and nuts
The remote On/Off key switch is used for the remote operation of the 701-MD and 720-MDO battery switches.
It can be mounted standalone or within the Contour Connect panel range.
Remote operated battery selector switch with deutsch connector
275A
BEP 701-MD Remote Operated Motorised Battery Switch - 275Amps
Replacement BEP Key For 701 Switch
701-C isolating switch standard.
The BEP 701 Contour Battery Master Switch offers a number of unique features. The highlights being the patented contour lock system, allowing it to be a stand alone unit, or locked together with other switches.
Mechanical Directional Wind Indicator
Dimensions:
370mm (l) oa
314mm (stem height)
376 (h) oa
Lifebuoy Ring SOLAS 2.5kg with Reflective Tape
