Stainless Rod Holder
-
Rod Holder 316SS Removable
Product Code: 4423
-
Rod Holder Black with SS brackets
Product Code: 54068B
Rod Holder, PVC with SS brackets
Surface mount style, transom, rear of bait station, could be fixed without SS bracket
Black PVC
Complete with mounting screws
-
Rod Holder Mount – Stow & Go BBQ
Product Code: 83754
Rod Holder Mount - Stow & Go BBQ For use with the Kuuma / Force 10 Stow-N-Go BBQ 1-1/2in O.D. tubing. Mounts on 60 deg. angle Extends to 18in Includes thumb screws. -
Rod holder Rack SS for 3 Rods
Product Code: 54082-04
Rod holder Rack Stainless for 3 Rods
-
Rod Mounting Loops - Available in White or Black
Simple effective holding rings for a single rod storage onboard the boat or mounting on the garage wall. Perfect for mounting rods on the cabin roof of a boat.
These racks are 14mm wide, 66mm long and 64mm deep. -
Rod Storage Rack
Product Code: 4416-3
Deluxe Rod Rack – Three Rod Mount
-
Rodent Stopper on Mooring Lines
Product Code: 4130
Pair of mooring line rate stoppers Designed to easily prevent any kind of visit by unwanted guests. It is proven to be very effective, stopping rats & mice from using the docking lines in order to enter your boat. -
Roller – black – 42mm x 64mm
Product Code: 11907
Roller - black - 42mm wide x 64mm diameter 14mm hole - designed to suit 1/2" diameter pin -
Rope Jammers
White Nylon
UV Resistant -
Rope Clam Cleat – Black
Product Code: 3970-BP
Rope Jammer
Black Nylon
UV Resistant3970 – Holds Rope 6mm to 12 mm
Dimensions:
(L) 93mm
(W) 28mm -
Also known as a Halyard cleat, this stainless steel 316 can be used for flagpoles, to hold rope in place. The smaller version may also be used for trying roman blinds at the side
-
Rope Cutter Spare Blades
Product Code: 3080B
Model 3080RC rope cutter BLADES
-
Round Hook Plate
Product Code: K135
Stainless steel 316 round Pad Eye with hook is used in shade sail applications. (Requires 2 x screws)
-
The stainless steel marine grade 316 round rings are very solid and dependable, suitable for many varieties of applications.
-
Round Strainer 1 1/4″
Product Code: 90556
Non-metallic and non-corroding, these strainers are ideal for small gen-sets and water makers.
-
Round Table – Universal
Product Code: 4496
Round Cockpit Table. Product code 4496
-
Rubber Exhaust Cover – 3″
Product Code: 42511
Rubber Exhaust Cover / flap
Internal is 3 inch or 77mm, external 3-3/4 or 93mm, 1 ½ inch or 38mm deep
Designed and rebated to take a pipe clamp.
Actual measurements show that the rubber would fit on a pipe with a external diameter of 75mm and should stretch tightly onto a 80mm (OD) pipe.
-
Rubber Exhaust Cover, 4″
Product Code: 42512
Rubber Exhaust Cover / flap
Internal 4inch or 100mm, external 4-1/2 inch or 118mm
Designed and rebated to take a pipe clamp.
Actual measurements show that the rubber would fit on a pipe with a external diameter of 100mm and should stretch tightly onto a 105mm (OD) pipe.
-
Moulded in black EPDM rubber with pressed stainless steel brackets. Very popular quick latch for hatches. Simple ‘T’ handle for ease of operation. Ideal for applications where there is constant vibration, movement or misalignment. -
Rubber Mooring Line Spring 10-12mm
Product Code: 14147-2
Rubber Mooring Line Snubber Spring 10-12mm Prevent shock and damage to lines, cleats and your vessel with our superior mooring line rubber snubber. Vessel mooring protection is achieved through the unique rope locking system. Suit lines from 10mm to 12mm Made from indestructible rubber -
Rubber protection boot to fit Toggle Switch
Product Code: 10245-BOOT
Splash Proof Boot for MAXTEK 20A Toggle switch
NOTE: Does not fit BEP switches
-
Rudder Anode – 1-7/8″ CMR-1 Aluminium
Product Code: ANOR01AL
Rudder Anode - 1-7/8" CMR-1
Cadmium-free Aluminium
Dimensions:
47mm Diameter
6mm Thick each half
Weight: 0.03kg -
Rudder Anode – 2-3/16″ CMR-2 Aluminium
Product Code: ANOR02AL
Rudder Anode - 2-3/16" CMR-2
Cadmium-free Aluminium
Dimensions:
71mm Diameter
12mm Thick each half
Weight: 0.2kg -
Rudder Anode – 3-3/4″ CMR-3 Aluminium
Product Code: ANOR03AL
Rudder Anode - 3-3/4" CMR-3
Cadmium-free Aluminium
Dimensions:
95mm Diameter
12mm Thick each half
Weight: 0.374kg
Mnfg No: CMR03AL -
Rudder Anode – 5″ CMR-4 Aluminium
Product Code: ANOR04AL
Rudder Anode - 5" CMR-4
Cadmium-free Aluminium Martyr Anodes
Dimensions:
127mm Diameter
16mm Thick each half
Weight: 0.57kg -
Rudder Anode – 90mm x 17mm – Aluminium
Product Code: ANOCMF90A
Rudder Anode – European style.
Dimensions:
90mm Diameter
17mm Height
Weight: 0.15Cadmium-free Aluminium
-
Rule 1100GPH Livewell Aerating Pump – Vertical
Product Code: NS1100R
Keep fresh, oxygenated water moving through your system with the Rule 1100 GPH Vertical Livewell Aerating Pump, a high-capacity unit designed for efficient circulation.
-
High-output 1100 GPH flow rate keeps water moving continuously for live bait tanks and onboard circulation
-
Built-in dual 1/2" NPT port lets you connect a washdown pump off the same inlet without drilling another hole in your hull
-
Quick-release motor cartridge gives you instant access to the impeller for fast cleaning or replacement without touching your hose connections
-
Versatile mounting design lets you install it inside a hull bracket, transom pod, swim step setup, or directly on trim tabs for water pickup while under way
-
-
RULE 800GPH Livewell Aerating Pump – Vertical
Product Code: NS800R
Keep your live bait in top shape with the Rule 800 GPH Vertical Livewell Aerating Pump, a reliable workhorse designed for smooth water delivery and flexible bilge setups.
-
Dependable 800 GPH flow rate keeps plenty of fresh, aerated water moving through your livewell or bait tank
-
Integrated 1/2" NPT secondary port lets you hook up a deck washdown pump without drilling another hole in your hull
-
Push-button motor cartridge system with an easy-grip rubber overmold makes clearing debris or swapping the motor a breeze while keeping your plumbing intact
-
360-degree rotatable base and glass-filled nylon barbs let you angle your inlet and discharge hoses exactly where you need them in tight spots
-
-
Rule Bilge 500GPH Submersible Pump
Product Code: NS500R
Bilge Rule 500GPH Submersible Bilge Pump 12V
-
Rule Hi Water Bilge Alarm and Float Switch 12V
Product Code: NSHWALARM
The High-Water Bilge Alarm consists of a non-mercury float switch and an in-dash gauge that features both a visual and an audible 85DB alarm.
-
Rule Submersible Bilge Pump 1100GPH 12V
Product Code: RULE1100M
Rule Submersible Bilge Pump 1100GPH.
-
Rule-Mate Fully Automated Bilge Pump 2000GPH
Product Code: NS2000RA
The Rule-Mate® 2000 GPH pump consists of a powerful Rule® bilge pump and a highly intelligent circuit board in a single housing. The pump activated when the water reaches 2-1/2" and automatically shuts off when the pump senses no water against the impeller, reducing the remaining water to approximately 5/8".
-
Rupp Marine Top Gun Bolt in Revolution Bases only -Pair
Product Code: ORUPP-R
Easy deployment
-
RV Mini Compact Dish Drainer Rack
Product Code: DISHDRAINER
Compact and lightweight dish drainer for where space is limited.
-
RV Toilet with Pedal Gravity Flush
Product Code: 11864
This camper RV toilet can make you feel as comfortable as in your own bathroom. The toilet has an integrated pedal and a soft closing seat and lid. It needs a half-step to add water and a full step to flush. Secure the toilet to the floor with the flange and t-bolts..- High profile for comfort
- Odorless Sealing Design
- Effortless foot pedal – Just slightly step on the pedal to add some water
- Premium durable construction made from PP and HDPE it is rated up to 140kg
-
RV Water Filler (Black) 38mm Hose
Product Code: 45282
Water Filler Inlet is used for RV & marine fresh water systems.
Constructed with UV stabilized plastic and internal check valve. -
RV Water Filler (White) 38mm Hose
Product Code: 45282-W
Water Filler Inlet is used for RV fresh water system and it is constructed with UV stabilized plastic. Internal check valve.
-
Stainless steel 316 grade “S”hook are desinged where a quick and easy fitting is needed.
Trailer winch wire connection
