MiniCommand
-
ZF MiniCommand Twin Control Head
Product Code: ZF4200
-
ZF MiniCommand Single Control Head
Product Code: ZF4100
MiniCommand
-
ZF 400 Series Dual Control Head – Pluggable
Product Code: ZF463-4P
ZF Control Head 400 Series - Chrome Lever, Dual, Synch 463-4P
-
YNZ CAT 3 4 & 5 Flare Pack
Product Code: PPAK27019
YNZ CAT 3, CAT 4 & CAT 5 Flare Pack in waterproof container.
2017 Requirements – Contains:
2 x red hand flares
2 x orange smoke torchPlease note that flares are classed as dangeous goods and therefore incur a shipping cost of $45 for North Island delivery or $55 for South Island delivery. Contact us to save on shipping cost if you are ordering multiple items.
-
YNZ CAT 1 & CAT 2 Flare Pack
Product Code: PPAK27017
YNZ CAT 1 & Cat II Flare Pack in waterproof container.
2017 Requriement – Contains:
4 x red hand flares
2 x orange smoke torchPlease note that flares are classed as dangeous goods and therefore incur a shipping cost of $45 for North Island delivery or $55 for South Island delivery. Contact us to save on shipping cost if you are ordering multiple items.
-
Yanmar Saildrive Split Anode Kit – Zinc
Product Code: ANO1964402660KITZ
Yanmar Saildrive Split Anode Kit. includes 2 x Anodes separate and 2 x socket head screws
YOU REQUIRE on your sail drive 2 X PLATES to mount Anodes on ( no need to remove prop)
Martyr Anodes
Suitable for both salt water
Fits Yanmar SD20, SD30, SD31, SD40 and SD50 Saildrives
Also avaible in aluminium sacrificial anode
-
Yanmar Saildrive Split Anode Kit – Aluminium
Product Code: ANO1964402660KITA
Yanmar Saildrive Split Anode Kit. includes 2 x Anodes separate and 2 x socket head screws
-
Yamaha Trim Tab Anode for 4T 9.9 – 15HP Outboard Engine
Product Code: ANO66M4537100A
Martyr - Yamha Aluminium Trim Tab Anode
CM66M4537100A 53 x 38 x 65mm
Yamaha replacement anode for 4T 9.9-15HP
Replaces 66M-45371-00
-
Yamaha Skeg Trim Tab 150, 175, 200, 225hp 2 & 4 Strokes
Product Code: ANO6J94537101A
Martyr - Yamaha Aluminium Trim Tab Anode
CM6J94537101A 100 x 84mm
Yamaha replacement skeg trim tab anode for various 2 & 4 stroke 150, 175, 200 & 225HP models
Replaces 6J9-45371-01
-
Yamaha replacement trim tab skeg anode for 150, 175 & 200HP
Product Code: ANO6K14537100A
Martyr - Yamaha Aluminium Trim Tab Anode
CM6K14537100A 92 x 76mm
Yamaha replacement trim tab skeg anode for 150, 175 & 200HP
Replaces 6K1-45371-00
-
Yamaha replacement trim tab anode for 200, 225 and 250HP
Product Code: ANO61A4537100A
Martyr - Yamaha Trim Tab Anode Aluminium
Yamaha replacement trim tab anode for 200, 225 and 250HPCM61A4537100A Dimensions: 99 x 91mm
Replaces 61A-45371-00
Product Information:
For use in salt water and brackish water
Performs better, protects longer than Zinc
Alloy is manufactured to meet or exceed US Military Specification MIL-DTL-24779C(SH)
Tried and tested genuine aluminium product
Aluminum anodes achieve a higher capacity (anode life) while maintaining the same output (level of protection)
Manufactured by the same manufacturer as the genuine OEM
-
Yamaha replacement skeg anode for V6 60, 70, 75, 85, 90, 115
Product Code: ANO67F4537100A
Martyr - Yamaha Aluminium Skeg Anode
Replacement part for Yamaha part: 67F-45371-00, 688-45371-01, 688-45371-02
Yamaha 67F-45371-00Martyr CM67F4537100A
Dimensions: 91 x 76mm
Suits the following Yamaha engines:
Two stroke: 60FETO (1989+), E60HMHD (1990+), 70BETO (1989+), 75AET (1995-97), 80AETO (1989-96), 85AET (1993-06), 90AETO (1989-18),
Four stroke: FT50BET (2001-06), FT50GET (2005-07), T50L (2015+), FT60BET (2003-07), FT60DET (2005-12), FT60GET (2013-14), T60L T60X (2015+), F70AET (2011-14) F70L F70X (2015+), F75L F75X (2015-17), F80AET (1999-07), F80BET (2005-14), F80L F80X (2015-17), F90L F90X (2015-17), F100AET (1999-06), F100DET (2005-14)
-
Yamaha replacement button CM9-46 anode
Product Code: ANO6884525101A
Martyr - Yamaha CM9-46 Aluminium Button Anode
Yamaha replacement button anode for various Yamaha 2T and 4T models from 25 to 85HP
Replaces 688-45251-01, CDZ9-046 - CDZ9-0110 – 6884525101
-
Yamaha Outboard Skeg Anode
Product Code: ANOYAM45371
Yamaha Outboard Replacement Skeg Anode.
-
Yamaha Fuel Line Blister Packed (2026-BP)
Product Code: 2026-BP
Yamaha Fuel Line Blister Packed (2026-BP) -
Yamaha Fuel Line (2026)
Product Code: 2026
Yamaha Fuel Line (2026) -
Yamaha Cylinder Anode 25-70HP
Product Code: ANO62Y1132500DA
Martyr - Yamaha Cylinder Anode Aluminium
Yamaha part 67F-11325-01-00
Yamaha replacement cylinder anode for F25, F30, F40, F50, F60 & F70
Replaces 62Y-11325-00
Dimensions: 49 x 11.4mm
-
Yamaha Aluminium Trim Tab
Product Code: ANO61N4525101A
Martyr - Yamaha Trim Tab Plate Anode Aluminium
CM61N4525101A 80 x 59 x 26mm
Yamaha replacement trim tab plate anode for 8, 9, 13, 25 & 60HP
Replaces 61N-45251-01
-
Y Piece 38mm (90619)
Product Code: 90619
Y Piece 38mm (90619) -
Y Piece 25mm/38mm (90618)
Product Code: 90618
Y Piece 25mm/38mm (90618) -
Y Piece 25mm (90617)
Product Code: 90617
Y Piece 25mm (90617) -
Y Piece 19mm-19mm-25mm (90787)
Product Code: 90787
Y Piece 19mm-19mm-25mm (90787) -
XF3 Large – Folding/Tilting – 3 Bike Rack 60 kg Capacity
Product Code: 7022
The Quick Fit XF3 is a safe and reliable bike carrier for the transportation of 3 bicycles.
-
XF2 Tilting 2 Bike Rack – 60KG Capacity
Product Code: 7021
Tow Bar Mount – Tailgate Tilt
The latest in Quick Fit Bike Racks -
XF2 Large Fold-up/Tilting 2 Bike Rack – 60KG Capacity
Product Code: 7020
Tow Bar Mounted – Quick Fit To suit longer wheelbase bikes Fully Folds away – Ideal for hatchback tail gates The latest in Quick Fit Bike Racks have been design to make it easier than ever to transport your bikes with you on your adventures.
-
Wobble Roller Blue Ribbed
Product Code: TC414032
Heavy duty 125mm wobble rollers designed to support and roll a boat on and off the trailer.
Unique design makes retrieval and launching an easy operation. Plus the mobility of the wobbly roller allows the boat to self center on the trailer when winching on. -
Wireless Remote for Marinco Remote Spotlight
Product Code: SPLR-2
Wireless remote SPLR-2 for Marinco remote spotlight series.
Suitable for both 12V & 24V systems
Used with the following Marinco Remote Spotlights
SPL-12B, SPL-12C, SPL-12W, SPL-24B, SPL-24W
• Wireless Bridge Remote
• Power: 12 or 24 volt (hard wired)
• Dimensions: 88W x 57H x 19D mm
• Weight: 60g
• Housing material: UV resistant PC/ASA
• Button material: Silicone (glow in the dark)
• Operating: temp range -15°C–45°C
• IP Rating: IP56Part Number: SPLR-2
-
Wireless Device Controller
Product Code: 91354
With a simple click of a button this wireless remote gives you the power to control devices while at the same time being free to move around your boat.
-
Wireless Boat Winch
Product Code: 9244
No more sweating at the boat ramp! Easily load boats up to 900kg. Conveniently operate the winch via the handheld remote.
-
Wired Remote for Marinco Remote Spotlight
Product Code: SPLR-3
Wired remote SPLR-3 for Marinco remote spotlight series.
Suitable for both 12V & 24V systems
Used with the following Marinco Remote Spotlights
SPL-12B, SPL-12C, SPL-12W, SPL-24B, SPL-24W
• Wired Bridge Remote
• Power: 12 or 24 volt (hard wired)
• Dimensions: 88W x 57H x 19D mm
• Weight: 60g
• Housing material: UV resistant PC/ASA
• Button material: Silicone (glow in the dark)
• Operating: temp range -15°C–45°C
• IP Rating: IP56Part Number: SPLR-3
-
Wiper Speed Control / Interval Controller – High Power Outpu
Product Code: 4569-P
Speich Wiper Speed / Interval Controller
The speed management of a single wiper motor with continuous and intermittent operating Mode
Higher Output drive power than the CT41 and can drive wiper motors up to 85 watt. -
Wiper Hose Thru Bulkhead -55mm
Product Code: ZZ-BF55-90
90° Bullhead through Hull Fitting
Bulkhead thickness up to 55mm -
Wiper Hose 6mm Bulkhead 90°
Product Code: ZZ-BF06-90
Fitting for wiper hose to pass through a bulkhead
90° hose fitting
Bulkhead thickness: 6mm -
Windward Wind Vane – Small
Product Code: AB002407
New Zealand Made Windicator, ideal for optimist Racer and small dingy sailing.
- Dinghy Racing Model
- Suitable for yachts 2-4 meters
- Mast top and foredeck mounting brackets supplied
- Supplied complete with reference arms
- 100% accurate in 2 knots of wind
- Weighs under 25 grams
- Vane arm Length 200mm
- Hard-wearing acetal bearing will ensure long life and very free movement of Vane arm
- Accurately balanced 100%
-
Wind Indicator – Masthead Wind Vane
Product Code: 70092
Mechanical Directional Wind Indicator
- Plastic direction vane with aluminium stem tube
- Large fin-low inertia vane
- Sensitive to light wind
- Easy-to-read
- Fully adjustable tacking tab system
- Reflective strips on vane
Dimensions:
370mm (l) oa
314mm (stem height)
376 (h) oa -
Winch Strap
Product Code: 99094
Replaces older style winch wire rope The best method to haul your boat on to your trailer by far. Why? * The strap is easy on the hands ** Freely run it through your hands when retrieving your boat; no wires to cut and dig into your flesh Safety *** Does not rust **** Does not stretch like wire propelyene wires. Stretching wires and rope store energy and if they break, watch out! ***** Avoid injury Wires and rope stretch and when they fail they will cause serious injury.
-
Winch handle holder- square base (63573)
Product Code: 63573
Winch handle holder- square base (63573) -
Winch handle holder- round base (63572)
Product Code: 63572
Winch handle holder- round base (63572) -
Winch Electric 2000
Product Code: 9240
Winch Electric 2000lbs
Remote Control Operated WinchSpecifications:
12V DC 0.8Kw/1.1hp253: 1 Gear reduction Ratio
7.6m cable at4.8mm dia
Mounting bolt pattern 123mm x 76mm
Line Pull speed 2 feet per Min, Current draw of 120amp based on max load of 2000lbs
Overall 308mm x 102mm x 158 high
-
Winch 3:1 Reduction with 4.5m Nylon Strap
Product Code: 63501-NB
Ideal trailer winch for small craft including dinghy's and jetskis. One way ratchet which can be disengaged for winding out.
Nylon strap offers the best solution to haul your boat on to your trailer by far.
- Easy on the hands
- Run through your hands when retrieving your boat; no wires to cut and dig into your flesh -
Winch 3-1 with Rope (9123)
Product Code: 9123
Winch 3-1 with Rope (9123) -
Winch 3-1 no Rope (9123NR)
Product Code: 9123NR
Winch 3-1 no Rope (9123NR) -
Winch 1-1 with Rope (9121)
Product Code: 9121
Winch 1-1 with Rope (9121) -
Winch 1-1 no Rope (9121NR)
Product Code: 9121NR
Winch 1-1 no Rope (9121NR) -
Wide Roller – 195mm
Product Code: NS1232
Roller guide - 208mm
Marine Grade 316 Stainless SteelLots of uses
- Ideal as a bow roller guide
- Cray pot guide
- Kontiki Drum roller
- Anchor Roller
- Trailer Roller
Dimensions:
Roller Width: 195mm
Bracket Width: 210mm
Width (oa): 250mm
Height (oa): 87mm -
Wide Roller – 135mm
Product Code: NS1232S
Bow Roller Guide
Roller width: 135mm
Roller bracket width: 150mm
Overall width (including bolt and nut): ~190-195mminternal roller hole : 20mm
-
White Fender G Series 22cm x 68cm
Product Code: 7237-W
Durable and reliable, the G Series white fender provides excellent protection for your boat’s hull against docks, pilings, and other vessels. Built from tough marine-grade materials, it’s designed to withstand harsh conditions while maintaining long-lasting performance. A practical choice for everyday docking and mooring.
-
White Curved 4 Grid Louvered Ventilators (4387)
Product Code: 4387
White Curved 4 Grid Louvered Ventilators (4387) -
White (43001-WH)
Product Code: 43001-WH
White (43001-WH) -
Whistle – Orange
Product Code: 70020
Lalizas Orange Safety Whistle
Used for attaching to LifeJackets and other Man Overboard safety equipment
ISO 12402-8 CE
-
Wheel Clamp – Defender 195
Product Code: TC522102
The Trojan Defender Wheel Clamp is quick and simple to fit, has a zinc and powder-coated finish and is fitted with a high quality lock. It also includes a disc which helps to cover the wheel nuts adding a further deterrent from theft. It has been designed to fit most 13" to 15" wheels.
-
Wheel Clamp – Defender 165
Product Code: TC522101
The Trojan Defender Wheel Clamp is quick and simple to fit, has a zinc and powder-coated finish and is fitted with a high quality lock. It also includes a disc which helps to cover the wheel nuts adding a further deterrent from theft. It has been designed to fit most 13" to 15" wheels.
-
Weld-on or Bolt-on Hull Anode – 152mm
Product Code: ACMHT1
Bolt-on or Weld-on Hull anode.
Bolt holes are pre-drilled into the strap
Aluminium strapDimensions:
Length of anode: 152 (L) x 76 (W) mm
Length between mounting holes: 197 mm (D)
14mm (W1) x 5mm (D1)
CMP anode part: CMHT1A
-
Weld-on or Bolt-on Hull Anode – 127mm
Product Code: ANOM35GA
Weld-on or bolt on hull anode.
-
Weaver Stand Off Brackets 30″
Product Code: WEAVER-SO30
Weaver Stand Off Brackets
30" long Stainless Steel
Sold in pairs -
Weaver Stand Off Brackets 24″
Product Code: WEAVER-SO24
Weaver Stand Off Brackets
24" long Stainless Steel
Sold in pairs -
Weaver Rubber Pad
Product Code: RP301
Weaver Rubber Pad
Rubber standoff pad (sold individually).
-
Weaver RBD-100 Dinghy Davits
Product Code: RBD100
Snap Davits for soft or hard bottomed Inflatable dinghies for vessels equipped with a stern platform. Suitable for both sail and power vessels with suitable transom.
-
Weaver Quick Kit For Snap Davit
Product Code: RBDKIT
Weaver Quick Kit For Snap Davit
Plates used for easy removal of davit heads from swim platform (used with RBD100 only)
Includes mounting hardware and quick-release pins With lanyard.
-
Weaver Davit Heads
Product Code: RS110
Weaver Davit Heads
sold as a pair
-
Waterproof Thermo Plastic Fuse Holder
Product Code: 11515A
Waterproof Thermo Plastic Fuse Holder -
Waterproof Deck Connector 4 pin Large (3231)
Product Code: 3231
Waterproof Deck Connector 4 pin Large (3231) -
Waterproof Deck Connector 3 pin Small (3215)
Product Code: 3215
Waterproof Deck Connector 3 pin Small (3215) -
Waterproof Deck Connector 3 pin Large (3230)
Product Code: 3230
Waterproof Deck Connector 3 pin Large (3230) -
Waterproof Deck Connector 2 pin (3221)
Product Code: 3221
Waterproof Deck Connector 2 pin (3221) -
Water Pressure Pump Kit 20 lpm 60psi – 12V with 1L Accumulat
Product Code: NS44KIT
A fully assembled pressure set that simplifies the installation of water pressure systems for both the professional and amateur installer. The set consists of a 3 chamber diaphragm pump, strainer and pre-pressurized accumulator tank with quick connect electrical connections on a Plate mounted board with 1/2" (13mm) outlets.
-
Water lock 50mm (WLOCKLR50)
Product Code: WLOCKLR50
Water lock 50mm (WLOCKLR50) -
Water lock 45mm (WLOCKLR45)
Product Code: WLOCKLR45
Water lock 45mm (WLOCKLR45) -
Water lock 40mm (WLOCKLR40)
Product Code: WLOCKLR40
Water lock 40mm (WLOCKLR40) -
Water Hose 25mm
Product Code: WATER25
Water Hose 25mm -
Water Hose 20mm
Product Code: WATER20
Premium Heavy Duty Water Hose 20mm
-
Water Hose 16mm
Product Code: WATER16
Premium Heavy Duty Water Hose 16mm
-
Water Hose 12mm
Product Code: WATER12
Premium Heavy Duty Water Hose 12mm
-
Water Heater Element 240v (14122)
Product Code: 14122
Water Heater Element 240v (14122) -
Water Heater Element 110v (14121)
Product Code: 14121
Water Heater Element 110v (14121) -
Water Heater 42L side mounts (411101)
Product Code: 411101
Water Heater 42L side mounts (411101) -
Water Heater 42L front and rear mounts (411111)
Product Code: 411111
Water Heater 42L front and rear mounts (411111) -
Waste Straight Vertical Outlet with 1 3/4″ (45mm) plug
Product Code: LP1600
Straight Waste with 45mm plug with 40mm total depth
Dimensions:
Drain:
Drain Stainless Steel with overall 80mm width
32mm - Thread type
40mm - Total Drain depthDrain Grate SS:
52mm - Overall Width -
Washer Hose
Product Code: ZZ-WH
Premium grade Silicone Washer Hose for Wiper Spray Systems
Impervious to salt water which breaks down PVC based hose.
6mm OD/4mm ID hoseSold per metre
-
Washdown Coil Hose Kit – 20ft / 6 metres
Product Code: NS60
Wash Down Coil Hose Kit
20ft coiled hose with snap on plastic garden type hose fittings and adjustable spray nozzle.
Spray Nozzle is easily adjustable
* Self-coiling design is easy to use, extremely flexible, lightweight, and compact.
* The hose retains and memory of its coiled shape which makes it easy to stow.* Constructed of UV resistant polyurethane that is far more durable than standard rubber and PVC hoses.
* Will not kink or tangle.
* Drinking water safe.
-
Wash down Hose fitting
Product Code: NS61
Wash down Hose fitting with shut off
Bulkhead fitting BULK HEAD fiited lightweight, and compact.
screw hose on or off using a snap fitting making coiled hoses easy to stow.UV resistant polyurethane
-
Vulcan 9 Kg
Product Code: VULCAN09
The new Vulcan anchor is Rocna’s first major design development since the launch of the highly successful and acclaimed Rocna anchor itself. Following on the success of the Rocna, designer Peter Smith was often approached by customers seeking to experience the exceptional holding power and setting performance of a Rocna, but who had difficulties accommodating the roll-bar design on their bow.
-
Vulcan 6 Kg
Product Code: VULCAN06
The new Vulcan anchor is Rocna’s first major design development since the launch of the highly successful and acclaimed Rocna anchor itself. Following on the success of the Rocna, designer Peter Smith was often approached by customers seeking to experience the exceptional holding power and setting performance of a Rocna, but who had difficulties accommodating the roll-bar design on their bow.
-
Vulcan 55 Kg
Product Code: VULCAN55
The new Vulcan anchor is Rocna’s first major design development since the launch of the highly successful and acclaimed Rocna anchor itself. Following on the success of the Rocna, designer Peter Smith was often approached by customers seeking to experience the exceptional holding power and setting performance of a Rocna, but who had difficulties accommodating the roll-bar design on their bow.
-
Vulcan 40 Kg
Product Code: VULCAN40
The new Vulcan anchor is Rocna’s first major design development since the launch of the highly successful and acclaimed Rocna anchor itself. Following on the success of the Rocna, designer Peter Smith was often approached by customers seeking to experience the exceptional holding power and setting performance of a Rocna, but who had difficulties accommodating the roll-bar design on their bow.
-
Vulcan 4 Kg
Product Code: VULCAN04
The new Vulcan anchor is Rocna’s first major design development since the launch of the highly successful and acclaimed Rocna anchor itself. Following on the success of the Rocna, designer Peter Smith was often approached by customers seeking to experience the exceptional holding power and setting performance of a Rocna, but who had difficulties accommodating the roll-bar design on their bow.
-
Vulcan 33 Kg
Product Code: VULCAN33
The new Vulcan anchor is Rocna’s first major design development since the launch of the highly successful and acclaimed Rocna anchor itself. Following on the success of the Rocna, designer Peter Smith was often approached by customers seeking to experience the exceptional holding power and setting performance of a Rocna, but who had difficulties accommodating the roll-bar design on their bow.
-
Vulcan 25 Kg Stainless
Product Code: VULCANSS25
Hand Polished 25Kg Vulcan Anchor
-
Vulcan 25 Kg
Product Code: VULCAN25
The new Vulcan anchor is Rocna’s first major design development since the launch of the highly successful and acclaimed Rocna anchor itself. Following on the success of the Rocna, designer Peter Smith was often approached by customers seeking to experience the exceptional holding power and setting performance of a Rocna, but who had difficulties accommodating the roll-bar design on their bow.
-
Vulcan 20 Kg
Product Code: VULCAN20
The new Vulcan anchor is Rocna’s first major design development since the launch of the highly successful and acclaimed Rocna anchor itself. Following on the success of the Rocna, designer Peter Smith was often approached by customers seeking to experience the exceptional holding power and setting performance of a Rocna, but who had difficulties accommodating the roll-bar design on their bow.
-
Vulcan 15 Kg
Product Code: VULCAN15
The new Vulcan anchor is Rocna’s first major design development since the launch of the highly successful and acclaimed Rocna anchor itself. Following on the success of the Rocna, designer Peter Smith was often approached by customers seeking to experience the exceptional holding power and setting performance of a Rocna, but who had difficulties accommodating the roll-bar design on their bow.
-
Vulcan 12 Kg
Product Code: VULCAN12
The new Vulcan anchor is Rocna’s first major design development since the launch of the highly successful and acclaimed Rocna anchor itself. Following on the success of the Rocna, designer Peter Smith was often approached by customers seeking to experience the exceptional holding power and setting performance of a Rocna, but who had difficulties accommodating the roll-bar design on their bow.
-
Volvo Penta IPS Sterndrives
Product Code: ANOVPIPSKITA
Martyr - Volvo Penta IPS Sterndrive Aluminium Anode Kit. Manufacturer #: CMVPIPSKITA
Replacement for Volvo Penta IPS Sterndrives. -
Volvo Penta 290 Dual Prop Engine Anode Kit
Product Code: ANO290DPKITA
Volvo Penta 290 Dual Prop Engine Anode Kit
-
Volvo Pencil Anode – Small – Aluminium
Product Code: ANO838929
Aluminium pencil anode for Volvo engines.
Volvo Penta replacement pencil anode for 200-250-270 series- For use in salt water
- Alloy is manufactured to exceed or meet US Military Specification MIL-DTL 18001L
- Manufactured by the same manufacturer as the genuine OEM
Dimensions:
43mm Overall length
30mm Exposed length
17mm Outside diameter
7/16-14 UNC Thread THD
M8 Thread THD1Replaces 838929, 00714 & CDZ9-011
CM9-11
Martyr Part # CM838929A
We carry a selection of pencil anodes from Martyr Anodes.
-
Volvo DPSA / SX-A Anode Kit
Product Code: ANOSXAKITA
Martyr - Volvo DPSA / SX-A Anode Kit - OEM Spec Aluminum.
Suits DPSA / SX-A . -
VHF/Cellular Through-Deck Mount
Product Code: P6115
VHF / Cellular through-deck mount-QuickFit style fitting. Product code P6115
Through deck mount, for use with SeaMaster VHF or Cellular antennas -
VHF/Cellular Stainless Steel QuickFit Mount-Black cable.
Product Code: P6759
VHF/Cellular stainless steel fold down mount. Product Code P6759
-
VHF/Cellular Stainless Steel QuickFit Mount
Product Code: P6159
VHF/Cellular stainless steel fold down mount. Product Code P6159
-
VHF Seamaster Pro Antenna Black 1.0m
Product Code: P6782
This range of "no cable" antennas has been designed for boaties who want to remove and refit their antennas as required. These antennas have 3dBi gain. These antennas need to be mounted on our SeaMaster Pro range of mounts.
-
VHF Radio Extension Speaker
Product Code: 7362
VHF Radio Auxiliary External Speaker for marine communications
Great for adding an external speaker to your VHF.
Specifications and Features:
- 8 ohm / 4 watt
- Colour: White
- Dust and Water resistant
- Mylar cone
- Small size: 80x70x45mm
- Fits Anywhere
- Mounting bracket included
- 1.5m cable
- 3.5mm plug
-
VHF Microphone Clip
Product Code: 7365
VHF Microphone Clip - Black
One piece VHF and CB radio nylon microphone clip for boats and RVs
35mm (L) X 35mm (W) X 8mm (H) -
VHF Longreach Adjustable Black Base
Product Code: P6151B
Can be used with the LongReach Pro VHF antennas. 5m of cable is wired into the mount.
Specifications
Pacific No. P6751
Plate: 93 x 66mm
Weight/Height: 510g/132mm
Hole Centres/Sizes: 73 x 46mm / Hole diameter – 8mm. -
VHF Antenna Adj Base – QuickFit Heavy Duty
Product Code: P6151
VHF/Cellular heavy duty fold down mount. Product code P6151
For VHF or cellular antennas with QuickFit attachments.
5m of cable is wired into the mount.
Base Plate Dimensions: 93 x 66mm -
VHF Antenna Adj Base – QuickFit Black
Product Code: P6711
Adjustable Base to suit QuickFit style aerials
5m Cable is attached to base which allows the antenna to be easily removed and remounted. -
VHF Aerial 4.9m Ultraglass Longreach Classic
Product Code: P6503
Pacific P6503 - VHF 4.9M ULTRAGLASS COLINEAR ANTENNA
-
VHF Aerial 0.6m for aluminium boats
Product Code: P6087
VHF Aerial 0.6m with 2m cable for aluminium boats. Product Code P6087
-
VHF Adjustable Fold-Flat Antenna Base
Product Code: 54040
Adjustable Base for VHFand AM/FM Radio Antenna’s
-
VHF 2.5m SS & UltraGlass QuickFit Antenna
Product Code: P6123
VHF 2.5m SS & UltraGlass QuickFit Antenna. Product code P6123
-
VHF 2.5m Longreach Pro – QuickFit Black
Product Code: P6124
Black VHF 2.5m Pro QuickFit Antenna
- 2.5m Black UltraGlass colinear antenna
- A high gain antenna which gives exceptional performance – Essential for boats that need to talk to distant stations.
- Cable is hardwired via the Pro Series mount
Fits Mounts: P6151B or P6759
Note: Contact us for international shipping costs.
-
VHF 2.5m – Quickfit (P6102)
Product Code: P6102
VHF 2.5m - Quickfit (P6102) -
VHF 1.8m White – Quickfit (7370 – P6101)
Product Code: 7370
VHF 1.8m White - Quickfit (7370 - P6101) -
VHF 1.8m UltraGlass QuickFit Antenna
Product Code: P6121
VHF 1.8M ULTRAGLASS ANTENNA
-
VHF 1.8m Black – Quickfit PRO (P6125)
Product Code: P6125
VHF 1.8m Black - Quickfit PRO (P6125) -
VHF 1.8m Black – Quickfit (7370BLK- P6701)
Product Code: 7370BLK
VHF 1.8m Black - Quickfit (7370BLK- P6701) -
VHF 1.0M ULTRAGLASS ANTENNA
Product Code: P6035
P6035: VHF 1.0M ULTRAGLASS ANTENNA 1.0m UltraGlass antenna. Half wave design with glass filled nylon ferrule. An economical option with the same outstanding electrical performance as the P6003.
-
VHF 1.0m S/S Antenna with Laydown Mount
Product Code: P6091
VHF 1.0m Stainless Steel Antenna. Product code P6091 VHF 1.0m antenna. The P6091 offers real value for money - full performance and durable construction.
-
VHF 1.0m – Quickfit (P6182)
Product Code: P6182
VHF 1.0m - Quickfit (P6182) -
VHF 0.45m Heliflex – Quickfit (P6106)
Product Code: P6106
VHF 0.45m Heliflex - Quickfit (P6106) -
VHF / AM / FM broadcast band splitter
Product Code: 7412
VHF / AM / FM broadcast band splitter / diplexer, with VHF and car radio plugs.
This splitter enables the use of a VHF antenna to provide AM/FM reception, without degrading the performance of the antenna at VHF frequencies.