The BEP CC-803N offers a more modern, flush mounted switch vs the standard 717 cluster
The CC-803N is supplied with cables to allow for horizontal or vertical configurations.
These components can also be easily removed and reconfigured if the factory layout does not suit your application.
Battery Distribution Panel for a single engine – 2 Battery Banks
DVSR conrol the power delivery to the engine and house batteries.
The BEP CC-802 offers a more modern, flush mounted switch panel versus the standard BEP 716 cluster
The CC-802 is supplied loosely assembled with links and joiners to allow it to be assembled in either the square or horizontal orientations
Innovative Dual Bank Control switch is like 3 switches in one – House, Start, and Emergency Parallel.
The BEP 721 Battery Selector Switch is a heavy duty selector switch. Housed in the same module as the 720, it includes the same removable plates and back cover. While BEP Marine recommends isolated battery systems as outlined with our distribution clusters, the 721 offers a simple economical way of separating two batteries.
More information coming soon.
The 720-MDO-EP (Emergency Parallel Switch) provides remotely activated, high current, emergency parallel connection of two battery banks for a 10 minute period following activation of the remote switch.
The 720-MDO is a high current (500A), remotely activated battery switch.
Remote operation allows the battery switch positioned where cable runs can be minimized. Reduced cable runs allow smaller section cable to be used, resulting in significant reductions in cable cost, plus weight savingsThe 720-MDO Version 8 has new installation options, whereby the motor/circuit board can be fed from an independent 12V or 24V supply.
Single Pole Heavy Duty Switch
Rated at 600 amps continuous and 2500 amps cranking it is well suited to larger vessels.
Dimensions: 110 x 110 x 100mm
Weight: 0.496kg
The 720 Heavy Duty Battery Switch follows the successful release of the 701 switch in 1999. It fits into the same contour lock system as used on the battery distribution system.
The 717-140A-DVSR is designed for twin engine installations.
BEP Dual Battery Selector with VSR
Label sheet (14 labels) For 700, 701, 720 & 721 switches
The DVSR (Digital Voltage Sensing Relay) allows charging of two independent battery banks from a single charging source. When the voltage on the start battery rises to a charged level, the DVSR engages allowing the 2nd battery to charge. When charging stops and voltage falls, the DVSR will disengage, isolating the two batteries from each other.
New in 2006 the panel mount range of battery switches are designed specifically for panel mount applications. This range gives a very compact, versatile solution with the following features..........
Features:
•Fits standard BEP battery switch label range.
•CSK recessed for surface mount application
•Standard 2 1/16" hole cut out (Same as standard gauge hole)
•Ignition Protected
•Full access for cables with no restrictions
•Fit into Contour Connect Panel
701 Specifications:
•Continuous Rating: 200 Amps DC
•Intermittent Rating: 300 Amps DC
•Cranking Rating: 1000 Amps DC
•Voltage Rating: 48 Volts DC
•Operation: 1-2-Both-Off
•Mounting: Recessed or Surface
•Ignition protected
•Termination Stud Size:
3 x 5/16"
•Dimensions: 69 x 69 x 75h mm
(2.75 x 2.75 x 3h inches)
•Tin plated copper studs and nuts
BEP 701-S Mini battery selector switch. The 701-S is the most compact selector switch available on the market. Housed in the same dimensions as the 701, and includes the same removable side plates and back cover.
New in 2006 the panel mount range of battery switches are designed specifically for panel mount applications. This range gives a very compact, versatile solution with the following features:
Features:
• Fits standard BEP battery switch label range.
• Removable key
• CSK recessed for surface mount application
• Standard 2 1/16" hole cut out (Same as standard gauge hole)
• Ignition Protected
• Full access for cables with no restrictions
• Fit into Contour Connect Panel
701 Specifications:
•Continuous Rating: 275 Amps DC
•Intermittent Rating: 455 Amps DC
•Cranking Rating: 1250 Amps DC
•Voltage Rating: 48 Volts DC
•Operation: On/Off
•Mounting: Recessed or Surface
•Ignition protected
•Termination Stud Size:
2 x 10 mm (3/8 inch)
•Dimensions: 69 x 69 x 75h mm
(2.75 x 2.75 x 3h inches)
•Tin plated copper studs and nuts
The remote On/Off key switch is used for the remote operation of the 701-MD and 720-MDO battery switches.
It can be mounted standalone or within the Contour Connect panel range.
Remote operated battery selector switch with deutsch connector
275A
BEP 701-MD Remote Operated Motorised Battery Switch - 275Amps
Replacement BEP Key For 701 Switch
701-C isolating switch standard.
The BEP 701 Contour Battery Master Switch offers a number of unique features. The highlights being the patented contour lock system, allowing it to be a stand alone unit, or locked together with other switches.
Replacement BEP key for 700 switch
After the successful release of the 701, 720 and 721 battery switches, BEP has responded to customer feedback concerning some installations where switches need to be recessed through varying thicknesses of panels.
maXtek Water-resistant Master Switch excellent for both marine and automotive use. Designed for panel flush mounting. Supplied with PVC Capped Key which stays in place when ON and can be removed in the OFF position.
Battery switch, compact selector switch, Housed in the same dimensions as a 701-S
* Continuous Rating: 275 Amps DC
* Intermittent Rating: 1250 Amps DC
* Operation: Selector On / Off
* Mounting: Recessed or surface
* Termination Stud Size: 3 x 5/16"
* Dimensions: 69 x 69 x 78H mm