Replacement Powerwinch Bearing Kit to suit 712 trailer winches. Manufacturer Part Number - R001281.
-
Bearing Kit for 712 powerwinch
Product Code: 9222
-
Bench Seat with Back Rest – Reversible
Product Code: S122
Comfortable Bench Seat with Back Rest - Reversible
Ideal for inflatable RIB’s, centre console craft that require seating with storage
- High-density Foam Cushions
- SS Arms and Back Supports
- Foam Padding Covered with Marine Grade Upholstery
- UV Resistant & non corrosive
- Suitable as a fish bin
Bench Dimensions:
380mm including foam (h) x 830mm (w) x 415mm (d)Overall Bench Dimensions:
700mm including foam (h) -
Bennett 12″ x 12″ LED Trim Tab Kit
Product Code: 70016
Balance loads, plane faster, increase efficiency and performance with Bennett BOLT Electric Trim Tab systems. BOLT is built to outlast any electric trim tab system on the market.
-
Bennett 9″ x 12″ LED Trim Tab Kit
Product Code: 7001
Complete Kit for your boat - nothing extra to buy!
-
Bennett 9″ x 12″ Plane’s each
Product Code: 70010
Bennett trim planes are made of high quality 304 stainless steel and remain strong and rigid, even in the most challenging situations.
Each trim plane is 12” (305mm ) wide and 9” (230mm ) deep
-
Bennett BOLT Auto Trim Pro 9″ x 12″ complete
Product Code: 7007
AutoTrim Pro is an all-in-one trim tab control system designed for boats of all sizes–packing in a boatload of essential features into an easy-to-use, space-saving keypad.
-
Bennett Rocker Switch Only
Product Code: 70033
The Bennett Electric Rocker Switch is ergonomically designed, water-resistant and provides a positive "click" when the trim tabs are engaged.
This switch is easy to install and includes a lock-out feature to prevent users from pressing down on opposite directions at the same time. -
Bennett Trim Tab Anode Kit
Product Code: ANOCMBNT1AKITA
Premium Martyr Aluminium anode kit to suit Bennett Trim Tabs
Complete Kit including 2 x anodes’ and mounting hardwware
-
Bennett Upper & Lower Mounting Adjustable Bracket Kit
Product Code: 70022
Upper and Lower Mounting Brackets for all Bennett ELECTRIC Actuators
-
Bennett Wiring Harness 20ft
Product Code: 70024
Bennett OEM part.
20ft wiring harness with Deutsch plug ends for waterproof, simple connections to BOLT actuators
-
BEP 12 Way Circuit Breaker Panel 902A
Product Code: 902A-12V
12 way Circuit Breaker Panel with Analogue Voltmeter
12 Volt DC
3 x 5 Amp Circuit Breakers
4 x 10 Amp Circuit Breakers
4 x 15 Amp Circuit Breakers
1 x 25 Amp Circuit BreakerDimensions (mm): 200 (h) x 239 (w) x 65 (d)
-
BEP 12 Way Circuit Breaker Panel 902NMH
Product Code: 902NMH
BEP 12 Way Circuit Breaker Panel
12 Volt DC
3 x 5 Amp Circuit Breakers
4 x 10 Amp Circuit Breakers
4 x 15 Amp Circuit Breakers
1 x 25 Amp Circuit Breaker
Dimensions (mm): 115 x 351 x 65
Features:
* Marine Grade powder coated aluminium
* Airpax circuit breaker
* Stylish Contour Design facia
* Green LED backlit labels
* Red LED indicates systems on
* Panels meet ABYC standards -
BEP 12 Way Circuit Breaker Panel 902NMV
Product Code: 902NMV
BEP 12 Way Circuit Breaker Panel
12 Volt DC
3 x 5 Amp Circuit Breakers
4 x 10 Amp Circuit Breakers
4 x 15 Amp Circuit Breakers
1 x 25 Amp Circuit Breaker
Dimensions (mm): 185 x 127 x 65
Features:
* Marine Grade powder coated aluminium
* Airpax circuit breaker
* Stylish Contour Design facia
* Green LED backlit labels
* Red LED indicates systems on
* Panels meet ABYC standards -
BEP 16 Way Circuit Breaker Panel 904AM
Product Code: 904AM
BEP 16 way circuit breaker panel with analogue volt and ammeter
12 Volt DC
4 x 5 Amp Circuit Breakers
5 x 10 Amp Circuit Breakers
5 x 15 Amp Circuit Breakers
1 x 20 Amp Circuit Breaker
1 x 25 Amp Circuit Breaker
Dimensions (mm): 295 x 239 x 65
Features:
* Marine Grade powder coated aluminium
* Airpax circuit breaker
* Stylish Contour Design facia
* Green LED backlit labels
* Red LED indicates systems on
* Panels meet ABYC standardsPrice on Enquiry
-
BEP 16 Way Circuit Breaker Panel 904NMV
Product Code: 904NMV
BEP 16 Way Circuit Breaker Panel 904NMV
12 Volt DC
4 x 5 Amp Circuit Breakers
5 x 10 Amp Circuit Breakers
5 x 15 Amp Circuit Breakers
1 x 20 Amp Circuit Breaker
1 x 25 Amp Circuit Breaker
Dimensions (mm): 370 x 127 x 65
Features:
* Marine Grade powder coated aluminium
* Airpax circuit breaker
* Stylish Contour Design facia
* Green LED backlit labels
* Red LED indicates systems on
* Panels meet ABYC standards -
BEP 2 Way Spray Proof Switch Panel
Product Code: 900-2WP
BEP 2 Way Spray Proof Switch Panel
900-2WP has 2 x on/off switches
The MICRO range offers the unique ability to select the size & orientation of switch panels by adding the compact modules together horizontally or vertically.
• Labels backlit with green LED changing to red when switch is on
• Full range of text or graphical labels available
• Mix’n’match LED’s and switches to suit your requirements
• Available in charcoal.
• Dimensions 86H x 58W x 28D (3.4H x 2.3W x 1.2D inches) -
BEP 20A On/Off/On DPDT Toggle Switch
Product Code: 32123
BEP Toggle switch
Switch configuration: Double Pole – Double Throw – On/Off/On
Compatible with Waterproof, Micro Series panels and Contour Switch Panel above
Switch Current Rating:
20 Amps @ 12 or 24 Volt DC -
BEP 24 hour Essential Circuit breaker Module
Product Code: 706-2W
706-2W 24 hour essential circuit module. Designed for smaller systems where only 2 circuit breakers are required. Supplied with 2 x 10 amp Carling CLB Series circuit breakers – push to reset.
-
BEP 24 hour Essential Circuit breaker Module (4W)
Product Code: 706-4W
The 706-4W 24hr service module consists of 1 x 5amp and 3 x 15amp push to reset Carling CLB Series thermal circuit breakers. Suitable for essential circuits such as bilge pump auto float switch supplies and stereo memory circuits. The push to reset function ensures essential 24hr circuits cannot be switched off inadvertently.
-
BEP 24 Way Circuit Breaker Panel 905AM
Product Code: 905-AM
BEP 24 Way Circuit Breaker Panel with Analogue Volts and Amp Meters
12 Volt DC
5 x 5 Amp Circuit Breakers
8 x 10 Amp Circuit Breakers
8 x 15 Amp Circuit Breakers
1 x 20 Amp Circuit Breaker
1 x 25 Amp Circuit Breaker
1 x 30 Amp Circuit Breaker
Dimensions (mm): 295 x 351 x 65
Features:
* Marine Grade powder coated aluminium
* Airpax circuit breaker
* Stylish Contour Design facia
* Green LED backlit labels
* Red LED indicates systems on
* Panels meet ABYC standards -
BEP 24 Way Circuit Breaker Panel 905NM
Product Code: 905NM
BEP 24 Way Circuit Breaker Panel 905NM
12 Volt DC
5 x 5 Amp Circuit Breakers
8 x 10 Amp Circuit Breakers
8 x 15 Amp Circuit Breakers
1 x 20 Amp Circuit Breaker
1 x 25 Amp Circuit Breaker
1 x 30 Amp Circuit Breaker
Dimensions (mm): 200 x 351 x 65
Features:
* Marine Grade powder coated aluminium
* Airpax circuit breaker
* Stylish Contour Design facia
* Green LED backlit labels
* Red LED indicates systems on
* Panels meet ABYC standards -
BEP 24 Way Circuit Breaker Panel 905NMV
Product Code: 905NMV
BEP 24 Way Circuit Breaker Panel 905NMV
12 Volt DC
5 x 5 Amp Circuit Breakers
8 x 10 Amp Circuit Breakers
8 x 15 Amp Circuit Breakers
1 x 20 Amp Circuit Breaker
1 x 25 Amp Circuit Breaker
1 x 30 Amp Circuit Breaker
Dimensions (mm): 285 x 239 x 65
Features:
* Marine Grade powder coated aluminium
* Airpax circuit breaker
* Stylish Contour Design facia
* Green LED backlit labels
* Red LED indicates systems on
* Panels meet ABYC standards -
BEP 3 Way Compact Panel with Power Socket
Product Code: 900-3WPS
BEP 3 Way Spray Proof Switch Panel with 16Amp Power Socket
Features:
• Compact Panel size
• Sprayproof inline fuse holders with fuses are included with all compact models
• Waterproof power sockets three way
• Power socket rated at 16A
• Waterproof to IP56Dimensions:
95mm(3.75")H x 107mm(4.25")W x 75mm(2.9")DSupplied with label sheet
-
BEP 32 Way Circuit Breaker Panel NC32YD
Product Code: NC32YD
BEP 32 Way Cruiser Series Circuit Breaker Panel NC32YD
-
BEP 32 Way Millennium Breaker Panel M32D
Product Code: M32D
BEP 32 Way Millennium Series Circuit Breaker Panel M32D
The Millennium Series offers compact sizing where space is at a premium as well as battery monitoring utilising BEP's multi function digital meter.
12 Volt DC
7 x 5 Amp Circuit Breakers
11 x 10 Amp Circuit Breakers
11 x 15 Amp Circuit Breakers
1 x 20 Amp Circuit Breaker
1 x 25 Amp Circuit Breaker
1 x 30 Amp Circuit Breaker
Dimensions (mm): 285 x 351 x 65
Features:
* Marine Grade powder coated aluminium
* Airpax circuit breaker
* Stylish Contour Design facia
* Green LED backlit labels
* Red LED indicates systems on
* Panels meet ABYC standards
Pricing on Request -
BEP 32120 – (ON) OFF (ON) Toggle Switch
Product Code: 32120
BEP 32120 - (ON) OFF (ON) Toggle Switch
(ON) OFF (ON) = (momentary) off (momentary)
Switch Current Rating:
10 Amps @ 230 Volt AC
20 Amps @ 12 or 24 Volt DC -
BEP 36 Way Circuit Breaker Panel NC36LD
Product Code: NC36LD
BEP 36 Way Cruiser Series Circuit Breaker Panel NC36LD Features: * Marine Grade powder coated aluminium * Airpax circuit breaker * Stylish Contour Design facia * Green LED backlit labels * Red LED indicates systems on * Panels meet ABYC standards * Available with analogue meters if required.
-
BEP 4 Way Circuit Breaker Panel 900
Product Code: 900
BEP 4 Way Circuit Breaker Panel 900
12 Volt DC
1 x 5 Amp Circuit Breaker
2 x 10 Amp Circuit Breakers
1 x 15 Amp Circuit Breaker* Marine Grade powder coated aluminium
* Airpax circuit breaker
* Stylish Contour Design facia
* Green LED backlit labels
* Red LED indicates systems on
* Panels meet ABYC standards
* Includes label sheet -
BEP 44 Way Millennium Breaker Panel M44D
Product Code: M44D
BEP 44 Way Millennium Series Circuit Breaker Panel M44D
The Millennium Series offers compact sizing where space is at a premium as well as battery monitoring utilising BEP's multi function digital meter.
12 Volt DC
10 x 5 Amp Circuit Breakers
14 x 10 Amp Circuit Breakers
14 x 15 Amp Circuit Breakers
3 x 20 Amp Circuit Breaker
1 x 25 Amp Circuit Breaker
2 x 30 Amp Circuit Breaker
Dimensions (mm): 370 x 351 x 65
Features:
* Marine Grade powder coated aluminium
* Airpax circuit breaker
* Stylish Contour Design facia
* Green LED backlit labels
* Red LED indicates systems on
* Panels meet ABYC standards
Pricing on Request -
BEP 44 Way Millennium Breaker Panel M44DH
Product Code: M44DH
BEP 44 Way Millennium Series Circuit Breaker Panel M44DH
The Millennium Series offers compact sizing where space is at a premium as well as battery monitoring utilising BEP's multi function digital meter.
12 Volt DC
10 x 5 Amp Circuit Breakers
14 x 10 Amp Circuit Breakers
14 x 15 Amp Circuit Breakers
3 x 20 Amp Circuit Breaker
1 x 25 Amp Circuit Breaker
2 x 30 Amp Circuit Breaker
Dimensions (mm): 285 x 463 x 65
Features:
* Marine Grade powder coated aluminium
* Airpax circuit breaker
* Stylish Contour Design facia
* Green LED backlit labels
* Red LED indicates systems on
* Panels meet ABYC standards
Pricing on Request -
BEP 50A (185050P)
Product Code: 185050P
BEP 50A (185050P) -
BEP 56 Way Millennium Panel M56D
Product Code: M56D
BEP 56 Way Millennium Series Circuit Breaker Panel M56D
The Millennium Series offers compact sizing where space is at a premium as well as battery monitoring utilising BEP's multi function digital meter.
12 Volt DC
12 x 5 Amp Circuit Breakers
18 x 10 Amp Circuit Breakers
18 x 15 Amp Circuit Breakers
4 x 20 Amp Circuit Breaker
2 x 25 Amp Circuit Breaker
2 x 30 Amp Circuit Breaker
Dimensions (mm): 455 x 351 x 65
Features:
* Marine Grade powder coated aluminium
* Airpax circuit breaker
* Stylish Contour Design facia
* Green LED backlit labels
* Red LED indicates systems on
* Panels meet ABYC standards
Pricing on Request -
BEP 6 Way Spray Proof Switch Panel
Product Code: 900-6WP
BEP 6 Way Spray Proof Switch Panel
Features:
• Compact Panel size
• Sprayproof inline fuse holders with fuses are included with all compact models
• Waterproof to IP56
Dimensions:
95mm(3.75")H x 107mm(4.25")W x 75mm(2.9")D
Supplied with label sheet -
BEP 60A (185060P)
Product Code: 185060P
BEP 60A (185060P) -
BEP 700 Easy Fit Battery Switch
Product Code: 700
After the successful release of the 701, 720 and 721 battery switches, BEP has responded to customer feedback concerning some installations where switches need to be recessed through varying thicknesses of panels.
-
BEP 701 Battery Switch – Panel Mount
Product Code: 701-PM
New in 2006 the panel mount range of battery switches are designed specifically for panel mount applications. This range gives a very compact, versatile solution with the following features:
Features:
• Fits standard BEP battery switch label range.
• Removable key
• CSK recessed for surface mount application
• Standard 2 1/16" hole cut out (Same as standard gauge hole)
• Ignition Protected
• Full access for cables with no restrictions
• Fit into Contour Connect Panel
701 Specifications:
•Continuous Rating: 275 Amps DC
•Intermittent Rating: 455 Amps DC
•Cranking Rating: 1250 Amps DC
•Voltage Rating: 48 Volts DC
•Operation: On/Off
•Mounting: Recessed or Surface
•Ignition protected
•Termination Stud Size:
2 x 10 mm (3/8 inch)
•Dimensions: 69 x 69 x 75h mm
(2.75 x 2.75 x 3h inches)
•Tin plated copper studs and nuts -
BEP 701 Medium Duty On/Off Battery Switch
Product Code: 701
The BEP 701 Contour Battery Master Switch offers a number of unique features. The highlights being the patented contour lock system, allowing it to be a stand alone unit, or locked together with other switches.
-
BEP 701-S Mini Battery Selector Switch
Product Code: 701-S
BEP 701-S Mini battery selector switch. The 701-S is the most compact selector switch available on the market. Housed in the same dimensions as the 701, and includes the same removable side plates and back cover.
-
BEP 701-S Mini Battery Selector Switch – Panel Mount
Product Code: 701-S-PM
New in 2006 the panel mount range of battery switches are designed specifically for panel mount applications. This range gives a very compact, versatile solution with the following features..........
Features:
•Fits standard BEP battery switch label range.
•CSK recessed for surface mount application
•Standard 2 1/16" hole cut out (Same as standard gauge hole)
•Ignition Protected
•Full access for cables with no restrictions
•Fit into Contour Connect Panel
701 Specifications:
•Continuous Rating: 200 Amps DC
•Intermittent Rating: 300 Amps DC
•Cranking Rating: 1000 Amps DC
•Voltage Rating: 48 Volts DC
•Operation: 1-2-Both-Off
•Mounting: Recessed or Surface
•Ignition protected
•Termination Stud Size:
3 x 5/16"
•Dimensions: 69 x 69 x 75h mm
(2.75 x 2.75 x 3h inches)
•Tin plated copper studs and nuts -
BEP 702 Distribution Stud
Product Code: 702
BEP 702 Distribution Stud
-
BEP 702 Distribution Stud – 2 Terminals (8mm and 10mm)
Product Code: 702-8-10
The Contour Distribution Stud allows terminating of heavy duty cables for one or more connections.
Contour lock mouldings with removable side plates allow for connections from all sides. -
BEP 702 Distribution Stud – 2 x 10mm Studs
Product Code: 702-2S
The Contour Distribution Stud allows terminating of heavy duty cables for one or more connections.
Contour lock mouldings with removable side plates allow for connections from all sides. -
BEP 702 Distribution Stud – 8mm
Product Code: 702-8-B
BEP 702 Distribution Stud
-
BEP 707 Circuit Breaker Module
Product Code: 707
BEP 707 Circuit Breaker Module offers provision for three circuit breakers ideal for medium duty loads, like waste treatment systems and electric toilets.
-
BEP 720 Heavy Duty On/Off Battery Switch
Product Code: 720
The 720 Heavy Duty Battery Switch follows the successful release of the 701 switch in 1999. It fits into the same contour lock system as used on the battery distribution system.
-
BEP 720 Remote Operated Motorised Battery Switch with Optica
Product Code: 720-MDO
The 720-MDO is a high current (500A), remotely activated battery switch.
Remote operation allows the battery switch positioned where cable runs can be minimized. Reduced cable runs allow smaller section cable to be used, resulting in significant reductions in cable cost, plus weight savingsThe 720-MDO Version 8 has new installation options, whereby the motor/circuit board can be fed from an independent 12V or 24V supply. -
BEP 720 Remote Operated Motorised Emergency Parallel Switch
Product Code: 720-MDO-EP
The 720-MDO-EP (Emergency Parallel Switch) provides remotely activated, high current, emergency parallel connection of two battery banks for a 10 minute period following activation of the remote switch.
-
BEP 721 Heavy Duty Battery Selector Switch
Product Code: 721
The BEP 721 Battery Selector Switch is a heavy duty selector switch. Housed in the same module as the 720, it includes the same removable plates and back cover. While BEP Marine recommends isolated battery systems as outlined with our distribution clusters, the 721 offers a simple economical way of separating two batteries.
-
BEP 800-MS1 Battery Management Panel
Product Code: 800-MS1
On larger boats there is normally space to recess a Battery Management Panel. BEP Marine has made numerous custom panels for different boat manufacturers and has seen the need to create a standard range for custom boat builders.
Features:
•Essential circuits, 24 hour supply
•Mains breakers for control panels, davit winches, or treatment systems
•Heavy duty breakers for anchor winches
•Powder coated aluminium panel
•Spare positions for additional battery switches and circuit breakers for extras such as radio batteries and genset batteries
-
BEP 800-MS2 Battery Management Panel
Product Code: 800-MS2
On larger boats there is normally space to recess a Battery ManagementPanel. BEP Marine has made numerous custom panels for different boatmanufacturers and has seen the need to create a standard range forcustom boat builders.
Features:
•Essential circuits, 24 hour supply
•Mains breakers for control panels, davit winches, or treatment systems
•Heavy duty breakers for anchor winches
•Powder coated aluminium panel
•Spare positions for additional battery switches and circuit breakers for extras such as radio batteries and genset batteries
-
BEP 800-MS3 Battery Management Panel
Product Code: 800-MS3
On larger boats there is normally space to recess a BatteryManagementPanel. BEP Marine has made numerous custom panels fordifferent boatmanufacturers and has seen the need to create a standardrange forcustom boat builders.
Features:
•Essential circuits, 24 hour supply
•Mains breakers for control panels, davit winches, or treatment systems
•Heavy duty breakers for anchor winches
•Powder coated aluminium panel
•Spare positions for additional battery switches and circuit breakers for extras such as radio batteries and genset batteries
-
BEP 800-MS4 Battery Management Panel
Product Code: 800-MS4
800-MS4 wiring diagram – click here to download
The 800-MS4 panel is designed for sail boats up to 14 m (46 ft) and power boats up to 10 m (32.9 ft) with single engine.
Essential circuits, 24 hour supply
Mains breakers for control panels, davit winches or treatment systems
800-MS4 is supplied with 702B negative stud
Heavy-duty breakers for anchor winches
Powder coated aluminum panel
Supplied with a full label set for panel circuit breakers - Item # SET-MSP (additional label sets available)
Spare positions for additional battery switches and circuit breakers for extras such as radio batteries and genset batteries
DIMENSIONS: 160x239x75 mm (6.3"x9.4"x2.9")
-
BEP Ammeter Shunt 0-450A – 50mv Meter Scale
Product Code: AMMETERSHUNT
Ammeter Shunt 450Amp – 50Mv Scale
Shunts are required when using both analogue and digital ammeters by wiring in series with the power suplly lines.
Dimensions: 83mm L x 45mm W x 44mm H
-
BEP Ammeter Shunt 50Aa 50mv
Product Code: AMMETERSHUNT50
Ammeter Shunt for circuits 0 – 50Amps with 50Mv Scale
-
BEP Ammeter Shunt Enclosure
Product Code: 711
BEP Ammeter Shunt Enclosure
The 711 feature modular sized contour lock mouldings, with removable side covers, ensuring your shunt installation meets ABYC standards by covering all exposed terminals.
(Shunts ordered separately)
711L - takes 2 x mini shunt or 1 maxi shunt
Dimensions: 138mm x 69mm x 50mm (H)
-
BEP BAT SW MDVS HD OPTIC 12/24V 500A MC6
Product Code: 720-MDVSO
More information coming soon.
-
BEP Battery Switch Control Panel – 1 Engine – 2 Battery Bank
Product Code: CC-802
Battery Distribution Panel for a single engine – 2 Battery Banks
DVSR conrol the power delivery to the engine and house batteries.
The BEP CC-802 offers a more modern, flush mounted switch panel versus the standard BEP 716 clusterThe CC-802 is supplied loosely assembled with links and joiners to allow it to be assembled in either the square or horizontal orientations
- Dual connection for both the engine and house batteries are connected
- DVSR
- Easy flush panel mount
- Mutiple layout – square or horizontal orientation
-
BEP Bilge Alarm Module with Switch
Product Code: 900-BA
BEP 900-BA Bilge alarm and bilge pump control panel includes 1 x on/ off/on switch for auto manual control, plus 1 x warning light and alarm for high water level alarm. (Float switch ordered separately)
The MICRO range offers the unique ability to select the size & orientation of
switch panels by adding the compact modules together horizontally or vertically.
• Labels backlit with green LED changing to red when switch is on
• Full range of text or graphical labels available
• Mix’n’match LED’s and switches to suit your requirements
• Available in charcoal or white
• Dimensions 86H x 58W x 28mm D (3.4H x 2.3W x 1.2D inches) -
BEP Bus Bar – 12 Way
Product Code: BB-12W
BEP Bus Bar - 12 Way
Dimensions:
177 x 15 x 29 mm
Features:
* 12 x 4mm (5/32") stainless steel screws with shake proof washers.
* 2 x 6mm (1/4") input studs
* 100A current rated
* Tin plated Brass
* Insulated mounting base with recessed mounting holes avoids accidential shorting on aluminum backing plates.
Specifications:
* Voltage Rating: 300 Volts AC Max & 48 Volts DC Max
* Bus material: Tin plated brass
* Stud material: Tin plated brass
* Screw Material: Stainless Steel
* Base material: Flame retardant plastic -
BEP Bus Bar – 6 Way
Product Code: BB-6W
BEP Bus Bar - 6 Way
Dimensions:
117 x 15 x 29 mmFeatures:
* 6 x 4mm (5/32") stainless steel screws with shake proof washers.
* 2 x 6mm (1/4") input studs
* 100A current rated
* Tin plated Brass
* Insulated mounting base with recessed mounting holes avoids accidential shorting on aluminum backing plates.
Specifications:
* Voltage Rating: 300 Volts AC Max & 48 Volts DC Max
* Bus material: Tin plated brass
* Stud material: Tin plated brass
* Screw Material: Stainless Steel
* Base material: Flame retardant plastic -
BEP Bus Bar 24 Way
Product Code: BB-24W-2S
Features
•4mm (5/32") stainless steel screws with shake proof washers.
•2 x 6mm (1/4") input studs
•Tin plated Brass
•Insulated mounting base with recessed mounting holes avoids accidential shorting on aluminum backing plates.
Specifications:
•Voltage Rating: 300 Volts AC Max & 48 Volts DC Max
•Bus material: Tin plated brass
•Stud material: Tin plated brass•Screw Material: Stainless Steel
-
BEP Bus Bar cover for stud MC20
Product Code: BBC-1
The Bus Bar Covers are designed to be a push fit, and to securely cover exposed studs and terminal lugs. Conforming to ABYC standards.
-
BEP C/Breaker small 50A Dual pole (CBS-50A-DP)
Product Code: CBS-50A-DP
BEP C/Breaker small 50A Dual pole (CBS-50A-DP) -
BEP Cct/Bkr small Double Pole 15A (CBS-15A-DP)
Product Code: CBS-15A-DP
BEP Cct/Bkr small Double Pole 15A (CBS-15A-DP) -
BEP Distribution Bus 300A
Product Code: 703-300A
Distribution Bus allows multiple terminations for heavy duty negative or positive connections. Modular sizing with contour lock mouldings allows easy grouping and meets ABYC standards for exposed terminals.
-
BEP Distribution Bus 500A
Product Code: 703-500A
BEP 703-500A Distribution Bus is designed to take loads from Heavy Duty Starter Circuits. Taller cover allows for more bulky cables and lugs.
-
BEP Dual Bank Control Battery Switch
Product Code: 772-DBC-EZ-BP
Innovative Dual Bank Control switch is like 3 switches in one – House, Start, and Emergency Parallel.
-
BEP Dual Battery Selector with VSR
Product Code: 714-140A-DVSR
BEP Dual Battery Selector with VSR
-
BEP Gas Detector 600-GD
Product Code: 600-GD
BEP Gas Control Panel with detection and alarm.
-
BEP Gas Detector FD-2
Product Code: FD-2
BEP Gas Detector FD-2
-
BEP Gas Detector with Built-In Sensor 600-GDRV
Product Code: 600-GDRV
The Contour Matrix Gas Detectors are the product of continuingresearch and development which BEP Marine Ltd devotes to their product range. The BEP Detectors use microprocessor control to ensure correct sensor sensitivity. The Detectors have the capability to control two sensors which detect both LPG and Petrol, with visual and audible alarms.
-
BEP Gas sensor LPG 5 metre BL-SL-L
Product Code: BL-SL-L
BEP Gas sensor LPG 5 metre
Gas sensor lead with a 5 meter lead. Fits 600-GD, 600-GDL, 600GDRV and FD-2
-
BEP Gas Shut Off Switch 600-LPG
Product Code: 600-LPG
BEP Gas Shut off Switch
Stand alone On/Off control of gas solenoid valve
This panel does not have gas detection capability. -
BEP Heavy Duty 650A 8 Way Bus Bar
Product Code: 777-BB8S-650
Marinco Pro Installer 650 Amp bus bar designed for flexibility and scalability.
Snap-out side skirts allow for additional cable entry, and radius ends improve cable routing options. It is easy to link other Pro Installer products to the bus bars because of the common interconnection height in the product line. -
BEP Heavy Duty ANL Fuse Holder
Product Code: 704-ANL
Allows fusing of heavy duty accessories between 80-500 Amp.
Mounted in Contour lock mouldings with removable sides.
Meets ABYC Standards for exposed terminals. -
BEP Insulated Stud Cover – Dual 6mm (IS-6mm-2) Red
Product Code: ISC-6-2R
BEP Insulated Stud Cover - Dual 6mm (IS-6mm-2) Red -
BEP Insulated Stud Cover – Dual 6mm (IS-6mm-2), black
Product Code: ISC-6-2
BEP Insulated Stud Cover - Dual 6mm (IS-6mm-2), black -
BEP Insulated Studs With Cover
Product Code: 704-4S
The 704-4S was designed for multiple heavy duty connections which need to be isolated from each other. This model completes the range of heavy duty connectors and meets ABYC standards for exposed terminals.
-
BEP Insulated twin stud 6mm Black with cover
Product Code: IS-6MM-2/DSP
BEP Insulated twin stud, 6mm Black with cover
6mm tinned copper stud with high temperature plastic base
Dimensions: 42.25mm (L) x 36mm (W) x 31mm (H)
25.5mm stud centres
24mm fixing hole centres -
BEP Insulated twin stud linked, 10mm Black
Product Code: IS-10MM-2L
BEP Insulated twin stud linked, 10mm Black
10mm tinned copper stud with high temperature plastic base
Dimensions: 42.25mm (L) x 36mm (W) x 31mm (H)
25.5mm stud centres
36mm fixing hole centres -
BEP Insulated twin stud, 6mm Black
Product Code: IS-6MM-2
BEP Insulated twin stud, 6mm Black
6mm tinned copper stud with high temperature plastic base
Dimensions: 42.25mm (L) x 36mm (W) x 31mm (H)
25.5mm stud centres
24mm fixing hole centres -
BEP Key For 700 Switch
Product Code: 700-KEY
Replacement BEP key for 700 switch
-
BEP Key For 701 Switch
Product Code: 701-KEY
Replacement BEP Key For 701 Switch
-
BEP LARGE C/Breaker Single Pole 100A (CBL-100A-SP)
Product Code: CBL-100A-SP
BEP LARGE C/Breaker Single Pole 100A (CBL-100A-SP) -
BEP M331 Splash Proof Boot
Product Code: M331
BEP M331 Splash Proof Boot for metal BEP toggle switches.
-
BEP Multi Bus Bar – 150Amps
Product Code: BB-4S-150A
The multi bus bars enables either positive and negative (DC) buses on one block or earth and neutral (AC) buses on one block.
-
BEP Multi Bus Bar 12 Way x 2
Product Code: BB-12W-2NC
The multi bus bars enables either positive and negative (DC) buses on one block or earth and neutral (AC) buses on one block.
-
BEP Multi Bus Bar 6 Way x 2
Product Code: BB-6W-2NC
The multi bus bars enables either positive and negative (DC) buses on one block or earth and neutral (AC) buses on one block.
-
BEP Relay -DVSR 140 Amp – 12/24 Volt
Product Code: 710-140A
The DVSR (Digital Voltage Sensing Relay) allows charging of two independent battery banks from a single charging source. When the voltage on the start battery rises to a charged level, the DVSR engages allowing the 2nd battery to charge. When charging stops and voltage falls, the DVSR will disengage, isolating the two batteries from each other.
-
BEP Remote Operated Motorised Battery Switch – 275Amps
Product Code: 701-MD
BEP 701-MD Remote Operated Motorised Battery Switch - 275Amps
-
BEP Remote Operated Motorised Battery Switch – 275Amps Deuts
Product Code: 701-MD-D
Remote operated battery selector switch with deutsch connector
275A -
BEP Switch 1101-BK On/Off 20A Rocker
Product Code: 3216
Contour 1100 Series Rocker Switch - 1101-BK
-
BEP Triple Battery Switches with DVSR – Flush mount
Product Code: CC-803N
The BEP CC-803N offers a more modern, flush mounted switch vs the standard 717 cluster
The CC-803N is supplied with cables to allow for horizontal or vertical configurations.
These components can also be easily removed and reconfigured if the factory layout does not suit your application.
-
BEP Twin O/B, 3 bat. banks-125A DVSR battery Dist. cluster
Product Code: 717-140A-DVSR
The 717-140A-DVSR is designed for twin engine installations.
-
BEP Water Proof Contour Panel – 6 way
Product Code: CSP6-F
Popular BEP switch panel.
-
Bi-Colour Pole Navigation Light
Product Code: 71312
LED Navigation Light for mounting on the bow deck of your boat.
-
Bilge Pump Float switch, DC 12V/24V
Product Code: 91549
Nuova Rade Float switch, DC 12V/24V, 15Α max(at 12 volt) This float switch is designed to automatically control the on – off cycle of bilge pumps. Designed with a reliable rolling-ball and switch system that prevents rapid on/off cycling found on some switches and is safer than mercury switches. When water lifts the chamber buoy up to 6 cm, the switch automatically turns the bilge pump on until the water is dry.
-
Bilge Pump Switch Blister (3206-BP)
Product Code: 3206-BP
Bilge Pump Switch Blister (3206-BP) -
Bilge Pump Switch Bulk (3206)
Product Code: 3206
Bilge Pump Switch Bulk (3206) -
Black (43001-BK)
Product Code: 43001-BK
Black (43001-BK) -
Black Ball – 30cm Day Sign Anchor
Product Code: 9320
Black Ball
Day Sign Anchor
30cm DiameterSupplied by Plastimo
-
Black Cone 33cm – Day Sign
Product Code: 9319
Black Cone 33cm - Day Sign
-
Black Curved 4 Grid Louvered Ventilators (4386)
Product Code: 4386
Black Curved 4 Grid Louvered Ventilators (4386) -
Black Fender G Series 17 x 59cm (7236)
Product Code: 7236
Black Fender G Series 17 x 59cm (7236)
